Prevents ValueError crash in dashboard get_board() when a task has
an ISO timestamp (e.g. "2026-05-10T15:00:00Z") instead of a unix epoch
int. Adds _to_epoch() helper that normalises both formats.
When a systemic failure (provider outage, auth expiry, OOM) crashes
multiple workers simultaneously, detect_crashed_workers increments
each task failure counter independently. The circuit breaker only
trips after N × failure_limit retries across the fleet.
Fingerprint crash errors by normalizing host-specific details (PIDs,
timestamps). When 3+ tasks crash with the same fingerprint in a
single detection cycle, immediately trip the circuit breaker
(failure_limit=1) instead of waiting for repeated failures.
Isolated crashes (unique fingerprints) retain their normal retry
budget. Protocol violations continue to trip immediately.
Includes regression tests for systemic and isolated crash paths.
When a task is manually unblocked (blocked → ready/todo), the
consecutive_failures counter and last_failure_error were left intact.
The next failure would immediately re-trip the circuit breaker because
the counter was still at or above the failure limit.
Reset both fields on unblock so the task gets a fresh retry budget.
Includes a regression test that verifies counters are zeroed.
max_runtime_seconds=0 was being silently coerced to None due to a falsy
check (if max_runtime_seconds). Zero is a valid value that causes the
dispatcher to immediately time out a task. The adjacent max_retries
parameter already used the correct 'is not None' pattern.
Fixes the inconsistency by aligning max_runtime_seconds with max_retries.
recompute_ready only scanned 'todo' tasks for promotion, ignoring
'blocked' tasks entirely. When a task was blocked (e.g. by the circuit
breaker) and its parent dependencies later completed, the task stayed
stuck in 'blocked' forever unless manually unblocked.
Now recompute_ready also scans 'blocked' tasks. When all parents are
done/archived, the blocked task is promoted to 'ready' with failure
counters reset — equivalent to an automatic unblock.
Includes a regression test for the blocked-parent-done promotion path.
Archiving or deleting a board via remove_board() leaves the path's
"schema already initialized" entry in the module-level cache. A
concurrent connect(board=<slug>) call (e.g. the dashboard event-stream
poll loop) then:
1. resolves the same kanban.db path,
2. recreates the directory + an empty sqlite file because
connect() does mkdir(parents=True, exist_ok=True),
3. skips the CREATE TABLE pass because the cache entry says the
schema is already in place,
4. errors on the next read with `no such table: task_events`.
Drop the cache entry before mutating the filesystem so the fresh file
gets a proper schema init on next connect(). Applies to both
archive=True (rename) and archive=False (rmtree) branches.
Fixes#23833.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Add model_override field to Task class and tasks schema
- Add migration for existing databases
- Spawn worker with -m model when model_override is set
Register the new ``--manual-paste`` flag on both entry points and
thread it through to the xAI loopback login:
* ``hermes auth add xai-oauth --manual-paste`` — pool-add path,
forwarded inside ``auth_commands.handle_auth_add``.
* ``hermes model --manual-paste`` — model-picker path, forwarded
by ``_model_flow_xai_oauth`` into the synthetic ``argparse.Namespace``
it passes to ``_login_xai_oauth``. The picker also now forwards
``--no-browser`` and ``--timeout`` for consistency (previously
hardcoded to defaults regardless of CLI flags).
Help text on both flags points at #26923 and names the
browser-only remote consoles (Cloud Shell, Codespaces, EC2
Instance Connect) so users searching ``hermes --help`` can find
the workaround.
xAI Grok OAuth (and Spotify) use a loopback redirect to
``http://127.0.0.1:<port>/callback`` to capture the authorization
code. That works when the browser and Hermes run on the same
machine, and the SSH tunnel recipe handles the regular remote
case. It breaks completely on **browser-only remote consoles**
(GCP Cloud Shell, GitHub Codespaces, AWS EC2 Instance Connect,
Gitpod, Replit, …) where the user has a browser but no real SSH
client to forward a port — the redirect to 127.0.0.1 on the
remote VM simply isn't reachable from the laptop, and there's
nothing the existing flow can do about it (#26923).
This commit adds the foundation for a manual-paste fallback:
* ``_is_remote_session`` now also recognises Cloud Shell,
Codespaces, Gitpod, Replit, StackBlitz (in addition to SSH),
so the existing tunnel hint at least fires in those
environments.
* ``_parse_pasted_callback`` accepts any of: a full
``http(s)://...?code=...&state=...`` URL, a bare ``?code=...``
query string, a bare ``code=...&state=...`` fragment, or a
bare opaque code value. Returns the same dict shape the HTTP
callback handler produces, so the caller's state / error
validation works unchanged (no CSRF bypass).
* ``_prompt_manual_callback_paste`` reads stdin with a clear
multi-line explanation of what's happening and what to paste.
* ``_xai_oauth_loopback_login`` gains a ``manual_paste`` kwarg
that skips the HTTP listener entirely. The redirect_uri,
PKCE verifier, state, and nonce are byte-identical to the
loopback path so xAI's token endpoint can't tell the
difference at the protocol level.
* ``_print_loopback_ssh_hint`` now also mentions
``--manual-paste`` so users without a real SSH client see a
path forward instead of a dead-end tunnel recipe.
* ``_login_xai_oauth`` threads ``args.manual_paste`` into the
loopback helper.
Salvages #19964 by @Beandon13. Adds `hermes kanban archive --rm` to
permanently remove already-archived tasks with cascading cleanup of
links, comments, events, runs, and notify-subs. Safety guard: only
archived tasks can be deleted; active/blocked/done must be archived
first.
Cherry-picked from #19964 onto current main (severe stale base, applied
manually to preserve substance only).
xAI's token endpoint returns HTTP 403 to the OAuth grant when the
account isn't on the allowlist for API access (e.g. standard
SuperGrok subscribers — see #26847). Treating it like a stale-token
400/401 made ``format_auth_error`` append "Run ``hermes model`` to
re-authenticate", which is misleading because re-login can't change
xAI's tier decision.
Split 403 off in both ``refresh_xai_oauth_pure`` and the loopback
login token exchange:
* New error code ``xai_oauth_tier_denied`` with ``relogin_required=False``
* Message explains the entitlement gate and points at the
``XAI_API_KEY`` + ``provider: xai`` fallback
* 400/401 still set ``relogin_required=True`` as before
* 5xx still set ``relogin_required=False`` as before
When the kanban auto-decomposer fans a triage task into child tasks,
recompute_ready() immediately promotes parent-free children to 'ready'
so the dispatcher picks them up. Some users want a manual workflow
where children stay in 'todo' for review before dispatch.
Add 'kanban.auto_promote_children' config key (default: true):
- false: children stay in 'todo' after decomposition
- true: existing behavior (auto-promote to 'ready')
Changes:
- kanban_db.py: decompose_triage_task() gains auto_promote param
- kanban_decompose.py: reads auto_promote_children from config
- kanban dashboard API: exposes the new setting in GET/PUT /orchestration
Closes#28016
resolve_xai_oauth_runtime_credentials() called _refresh_xai_oauth_tokens()
with no try/except. A terminal refresh failure (HTTP 400/401/403 —
invalid_grant, token revoked) propagated without clearing the dead
access_token / refresh_token from auth.json, causing every subsequent
session to retry the same doomed network request.
Add a try/except around the refresh call that mirrors the existing
credential_pool.py quarantine: when _is_terminal_xai_oauth_refresh_error
identifies a non-retryable failure, clear the dead token fields from
auth.json and write a last_auth_error diagnostic marker so future calls
fail fast with a clear relogin_required error instead of hitting the
network.
active_provider is preserved (set_active=False) so multi-provider users
whose chosen provider is not xai-oauth are unaffected.
Tests: two new cases in test_auth_xai_oauth_provider.py cover terminal
quarantine and transient pass-through.
Plugin discovery exceptions in gateway startup (gateway/run.py) and
CLI startup (hermes_cli/main.py) are caught and logged at DEBUG
level, making them invisible at the default INFO log level.
If any plugin import fails — syntax error, missing dependency, import
cycle — operators get zero indication unless they bump the log level
to DEBUG. This makes broken plugins appear enabled but silently
non-functional.
Change both locations to logger.warning() so failures are visible at
production log levels.
Closes#28137
* feat: add /update slash command to CLI and TUI
* test(cli): add Python tests for /update slash command
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): address Copilot review for /update slash command
Route classic CLI /update through prompt_toolkit modal confirmation and
defer relaunch to the main-thread cleanup path after app.exit(). Tighten
Y/n semantics, add Python wrapper and catalog coverage tests, and assert
/update stays visible in the TUI command catalog.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): address review feedback on /update command
- Replace raw input() with _prompt_text_input_modal in _handle_update_command
to avoid EOF/hang/keystroke-leak races with prompt_toolkit's stdin ownership
- Fix confirmation logic: only proceed on recognized affirmative aliases
(y/yes/1/ok); cancel on everything else including empty string, typos,
and unrecognized input — matches all other [Y/n] prompts in the codebase
- Route relaunch through main-thread shutdown path: set _pending_relaunch
and return False from process_command so process_loop triggers app.exit();
run() then calls relaunch() after prompt_toolkit has restored terminal modes
and after cleanup — safe on both POSIX (execvp) and Windows (subprocess+exit)
- Fix misleading docstring in test_update_command.py: the Vitest only covers
the TypeScript slash handler that emits code 42, not the Python wrapper
branch that acts on it
- Rewrite tests to use SimpleNamespace pattern (like test_destructive_slash_confirm)
so _prompt_text_input_modal can be stubbed directly
- Add Python test for _launch_tui exit-code-42 → relaunch branch in main.py
Agent-Logs-Url: https://github.com/NousResearch/hermes-agent/sessions/f6da68cf-e7b1-4b7a-aed6-3d4b0f523bdb
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
* fix(cli): polish test fixtures for /update command
- Remove unused _prompt_text_input from SimpleNamespace stub
- Use pytest.fail sentinel in managed-install guard test to catch unexpected modal invocations
Agent-Logs-Url: https://github.com/NousResearch/hermes-agent/sessions/f6da68cf-e7b1-4b7a-aed6-3d4b0f523bdb
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
* chore: re-trigger CI after Copilot review fixes
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
resolve_minimax_oauth_runtime_credentials called _refresh_minimax_oauth_state
without a try/except, so a terminal failure (invalid_grant,
refresh_token_reused, invalid_refresh_token) raised AuthError but left
the dead refresh_token in auth.json. Every subsequent API call retried
the same token via a network round-trip, failing identically each time.
Fix: wrap the refresh call and, when exc.relogin_required is True and a
refresh_token is present, clear the dead OAuth fields (access_token,
refresh_token, expires_*) and write a last_auth_error quarantine marker
to auth.json before re-raising. The next call sees no access_token and
fails fast with 'not_logged_in' — no network retry — and the user is
prompted to re-authenticate.
Mirrors the existing quarantine pattern for Nous (_quarantine_nous_oauth_state),
xAI-OAuth (#28116), and Codex-OAuth (#28118). Persist failure is
best-effort (logged at DEBUG, error still re-raised).
Salvaged from #28003 by @EloquentBrush0x — contributor's branch was
severely stale (would have reverted ~5000 LOC across azure/kanban/i18n
subsystems); fix re-applied surgically with their pattern preserved and
added two regression tests (terminal-quarantines + transient-does-not-quarantine).
When a Codex OAuth refresh token is permanently invalidated (HTTP 400/401/403,
token revoked or reused), _mark_exhausted was called but auth.json was left with
the dead credentials. On the next session, _seed_from_singletons re-read
auth.json and re-seeded the pool with the same revoked token, triggering the
same terminal failure in a loop.
Add _is_terminal_codex_oauth_refresh_error to auth.py and a matching quarantine
block in _refresh_entry: when a terminal error is detected and auth.json holds
no newer tokens, clear access_token/refresh_token from auth.json and remove all
device_code-sourced pool entries from memory. Mirrors the Nous quarantine added
in c90556262 and the xAI quarantine in #28116.
Also add a pre-refresh sync from auth.json before calling refresh_codex_oauth_pure,
matching the xAI and Nous patterns, to avoid refresh_token_reused races when
multiple Hermes processes share the same auth.json singleton.
Salvaged from #27911 by @EloquentBrush0x — contributor's branch was severely
stale (would have reverted ~5000 LOC across azure/kanban/i18n subsystems);
fix re-applied surgically on current main with their predicate and tests preserved.
PR #28102 made the summary-failure abort path the unconditional default,
changing established behavior. Gate it behind config.yaml flag
`compression.abort_on_summary_failure` (default False = historical
fallback-placeholder behavior).
- hermes_cli/config.py: new `compression.abort_on_summary_failure` key,
default False, documented inline.
- agent/agent_init.py: read the flag from compression config and pass to
ContextCompressor.
- agent/context_compressor.py: `__init__` accepts `abort_on_summary_failure`
(default False). `compress()` failure branch gates the abort on the
flag; when False, falls through to the restored legacy fallback path
(static "summary unavailable" placeholder + drop middle window).
- tests: restore original fallback expectations as default; add new
TestAbortOnSummaryFailure class for the opt-in mode.
Gateway/CLI plumbing (force=True on /compress, hygiene/handler abort
detection, locale `gateway.compress.aborted` key) from PR #28102 stays
intact — those paths only fire when `_last_compress_aborted` is True,
which now only happens when the flag is enabled.
When refresh_xai_oauth_pure raises a terminal error (HTTP 400/401/403,
i.e. revoked or reused refresh token), _refresh_entry's existing race-
recovery path re-syncs from auth.json and returns if another process has
already rotated the tokens. If auth.json still holds the same stale
token pair, the function fell through to _mark_exhausted — leaving the
dead credentials in auth.json. On the next Hermes startup _seed_from_singletons
re-seeded the pool from those stale tokens, causing the same failure loop
on every session.
Fix: after the auth.json re-sync check in the xAI-oauth error handler,
detect terminal errors with the new _is_terminal_xai_oauth_refresh_error
helper and apply a quarantine:
- Clear access_token and refresh_token from providers["xai-oauth"]["tokens"]
in auth.json so they are not re-seeded.
- Write a last_auth_error entry for hermes doctor / auth status diagnostics.
- Remove all loopback_pkce entries from the in-memory pool so the current
session stops retrying with the dead credentials.
Mirrors the identical quarantine already in place for Nous OAuth
(c90556262).
Closes the parity gap introduced when c90556262 added Nous-only terminal
error handling without a corresponding xAI-oauth path.
When xAI's auth backend fails to redirect (e.g. the German "We couldn't reach
your app" fallback shown in #27385), users sometimes navigate manually to the
bare loopback callback URL — `http://127.0.0.1:<port>/callback` with no query
string. The handler used to return 200 "xAI authorization received" for any
GET that hit the expected path, because `parse_qs("")` yields no `code` and no
`error`, leaving `result` untouched while the success page was still served.
The CLI's wait loop, of course, still saw no code and timed out with
`AuthError: xAI authorization timed out waiting for the local callback.`
The user is left looking at a browser tab that claims success and a terminal
that says failure — exactly the contradiction in #27385.
This change makes the empty-callback case return 400 with an explicit
"not received" page and a hint to retry `hermes auth add xai-oauth`. The
wait-loop semantics are unchanged: `result["code"]` and `result["error"]`
both stay None, so the CLI still raises a real timeout rather than treating
the bare hit as a successful callback.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
decompose_triage_task inlines SQL INSERTs for atomicity and intentionally
bypasses link_tasks() — which calls _would_cycle() per edge. If the LLM
emits a cyclic parent graph (e.g. A.parents=[1], B.parents=[0]) the DB
write succeeds but every involved child deadlocks in 'todo' forever:
recompute_ready() requires all parents to be done, which is impossible
when A waits for B and B waits for A.
Add a Kahn topological sort over the sibling parent indices in the
pre-validation block, before any DB writes. Mirrors the cycle-safety
guarantee that link_tasks() provides for manually linked tasks.
* feat(dep_ensure): complete Windows bootstrap — dep_ensure + install.ps1 + detection
dep_ensure.py gains Windows awareness: PowerShell invocation, platform-
specific browser detection, (path, shell) tuple returns.
install.ps1 gains -Ensure/-PostInstall modes using npm -g --prefix
(aligned with install.sh) and agent-browser install for Chromium.
browser_tool.py gains node/ in candidate dirs for Windows .cmd shims.
Both install scripts bundled in pip wheel.
Tracking: #27826
* fix(install.ps1): add --ignore-scripts to npm install for camofox
@askjo/camofox-browser has a dependency (impit) whose postinstall
script runs `npx only-allow pnpm`, which fails under npm. Adding
--ignore-scripts avoids the spurious failure without affecting
functionality.
Tracking: #27826
* fix: remove duplicate install scripts from git
CI already copies scripts/install.{sh,ps1} into hermes_cli/scripts/
during wheel build. No need to commit copies — .gitignore keeps them
out, _find_install_script() falls back to scripts/ for git-clone users.
Tracking: #27826
* fix: address review — remove env_extra, fix ps1 error handling
- Remove unused env_extra parameter from ensure_dependency()
- Invoke-EnsureMode node case now uses Test-Node consistently
- Install-AgentBrowser uses throw instead of exit 1
* feat(config): add install-method stamping + Docker detection
Dockerfile stamps "docker", install.sh stamps "git", and cmd_postinstall
stamps "pip" into ~/.hermes/.install_method. detect_install_method() reads
the stamp first, then falls back to managed-system / container / .git
heuristics. Adds Docker upgrade guidance.
Tracking: #27826
* fix(stamp): move Docker stamp to entrypoint, install.sh stamp after print_success
The Dockerfile stamp was overwritten by the VOLUME overlay at container
start. Moving it to entrypoint.sh ensures it persists. The install.sh
stamp now writes after print_success so it only lands on full success.
The agent can now produce a chart, PDF, spreadsheet, or any other supported
file type and have it land in Slack / Discord / Telegram / WhatsApp / etc.
as a native attachment, just by mentioning the absolute path in its
response. Same primitive works for kanban-worker completions: workers
attach artifacts via kanban_complete(artifacts=[...]) and the gateway
notifier uploads them alongside the completion message.
Changes:
- gateway/platforms/base.py: extract_local_files now covers PDFs, docx,
spreadsheets (xlsx/csv/json/yaml), presentations (pptx), archives
(zip/tar/gz), audio (mp3/wav/...), and html — not just images and video.
Image/video extensions still embed inline; everything else routes to
send_document via the existing dispatch partition in gateway/run.py.
- tools/kanban_tools.py + hermes_cli/kanban_db.py: kanban_complete gains
an explicit ``artifacts`` parameter. The handler stashes it in
metadata.artifacts (for downstream workers) and the kernel promotes
it onto the completed-event payload so the notifier can find it
without a second SQL round-trip.
- gateway/run.py: _kanban_notifier_watcher now calls a new helper
_deliver_kanban_artifacts after sending the completion text. The
helper reads payload.artifacts (preferred), falls back to scanning
the payload summary and task.result with extract_local_files, then
partitions images / videos / documents and uploads each via
send_multiple_images / send_video / send_document.
- website/docs/user-guide/features/deliverable-mode.md + sidebars.ts:
user-facing docs page covering the extension list, the kanban
artifacts pattern, and the MCP-for-connector-breadth recommendation.
Tests:
- tests/gateway/test_extract_local_files.py: 7 new test cases
(documents, spreadsheets, presentations, audio, archives, html,
chart-pdf canonical case). 44 passing, 0 regressions.
- tests/tools/test_kanban_tools.py: 4 new cases covering the artifacts
arg shape (list / string / merge with existing metadata / type
rejection). 17 passing.
- tests/hermes_cli/test_kanban_notify.py: 2 new cases covering full
notifier → artifact-upload path and missing-file silent-skip. 12
passing.
- E2E (real files, real kanban kernel, real BasePlatformAdapter):
worker calls kanban_complete(artifacts=[png,pdf,csv]) → metadata +
event payload land → notifier helper partitions correctly →
send_multiple_images called once with the PNG, send_document called
twice with PDF + CSV.
What's NOT in this PR (deferred to follow-ups):
- Ad-hoc "research this for two hours, ping the thread when done"
slash command — covered today by kanban subscriptions; a dedicated
slash command can ride a follow-up PR if needed.
- Setup-wizard prompt for recommended MCP servers (Notion, GitHub,
Linear, etc.) — docs page lists them; UI is a separate change.
Plan and rationale captured in ~/.hermes/docs/perplexity-computer-parity.pdf
(local doc, not shipped).
Adds a 'triage_aux_unavailable' diagnostic for tasks stuck in triage when
neither the active aux helper slot nor the main-model auto fallback is usable.
Auto-decompose aware:
- kanban.auto_decompose=True (default): primary is auxiliary.kanban_decomposer,
triage_specifier is the fanout=false fallback.
- kanban.auto_decompose=False: primary is auxiliary.triage_specifier (manual
'hermes kanban specify' path).
Default aux slots use 'provider: auto' which falls back to the main model, so
this rule only fires when both the explicit slot config AND the main-model
auto fallback are absent. Quiet by default; informative when there is a real
config gap.
Also adds kd.config_from_runtime_config() that carries kanban + auxiliary +
model keys through to diagnostics, and updates CLI/dashboard call sites to
use it. config_from_kanban_config() is preserved for back-compat.
Reworks the original PR #25640 idea (@qWaitCrypto) to align with the new
auto-decompose dispatcher path landed in #27572. The original PR pointed only
at auxiliary.triage_specifier, which is now the fallback rather than the
primary helper.
Co-authored-by: qWaitCrypto <axmaiqiu@gmail.com>
