The _watch_update_progress() poll loop never deleted .update_prompt.json
after forwarding the prompt to the user, causing the same prompt to be
re-sent every poll cycle (2s). Two fixes:
1. Delete .update_prompt.json after forwarding — the update process only
polls for .update_response, it doesn't need the prompt file to persist.
2. Guard re-sends with _update_prompt_pending check — belt-and-suspenders
to prevent duplicates even under race conditions.
Add regression test asserting the prompt is sent exactly once.
When a user configures a provider (e.g. `hermes auth add openai-codex`)
but never selects a model via `hermes model`, the gateway and CLI would
pass an empty model string to the API, causing:
'Codex Responses request model must be a non-empty string'
Now both gateway (_resolve_session_agent_runtime) and CLI
(_ensure_runtime_credentials) detect an empty model and fill it from
the provider's first catalog entry in _PROVIDER_MODELS. This covers
all providers that have a static model list (openai-codex, anthropic,
gemini, copilot, etc.).
The fix is conservative: it only triggers when model is truly empty
and a known provider was resolved. Explicit model choices are never
overridden.
The previous wording ('If one clearly matches') set too high a threshold,
and 'If none match, proceed normally' was an easy escape hatch for lazy
models. Now:
- Lowered threshold: 'matches or is even partially relevant'
- Added MUST directive and 'err on the side of loading' guidance
- Replaced permissive closer with 'only proceed without if genuinely none
are relevant'
This should reduce cases where the agent skips loading relevant skills
unless explicitly forced.
When the gateway shuts down gracefully (hermes update, gateway restart,
/restart), it now writes a .clean_shutdown marker file. On the next
startup, if this marker exists, suspend_recently_active() is skipped
and the marker is cleaned up.
Previously, suspend_recently_active() fired on EVERY startup —
including planned restarts from hermes update or hermes gateway restart.
This caused users to lose their conversation history unexpectedly: the
session would be marked as suspended, and the next message would
trigger an auto-reset with a notification the user never asked for.
The original purpose of suspend_recently_active() is crash recovery —
preventing stuck sessions that were mid-processing when the gateway
died unexpectedly. Graceful shutdowns already drain active agents via
_drain_active_agents(), so there is no stuck-session risk. After a
crash (no marker written), suspension still fires as before.
Fixes the scenario where a user asks the agent to run hermes update,
the gateway restarts, and the user's next message gets an unwanted
'Session automatically reset' notification with their history cleared.
When /update runs via Telegram, hermes update --gateway is spawned inside
the gateway's systemd cgroup. The update process itself calls
systemctl restart hermes-gateway, which tears down the cgroup with
KillMode=mixed — SIGKILL to all remaining processes. The wrapping bash
shell is killed before it can execute the exit-code epilogue, so
.update_exit_code is never created. The new gateway's update watcher
then polls for 30 minutes and sends a spurious timeout message.
Fix: write .update_exit_code from Python inside cmd_update() immediately
after the git pull + pip install succeed ("Update complete!"), before
attempting the gateway restart. The shell epilogue still writes it too
(idempotent overwrite), but now the marker exists even when the process
is killed mid-restart.
When running inside WSL (Windows Subsystem for Linux), inject a hint into
the system prompt explaining that the Windows host filesystem is mounted
at /mnt/c/, /mnt/d/, etc. This lets the agent naturally translate Windows
paths (Desktop, Documents) to their /mnt/ equivalents without the user
needing to configure anything.
Uses the existing is_wsl() detection from hermes_constants (cached,
checks /proc/version for 'microsoft'). Adds build_environment_hints()
in prompt_builder.py — extensible for Termux, Docker, etc. later.
Closes the UX gap where WSL users had to manually explain path
translation to the agent every session.
Follow-up for cherry-picked PR #8272:
- Add MATRIX_RECOVERY_KEY to module docstring header in matrix.py
- Register in OPTIONAL_ENV_VARS (config.py) with password=True, advanced=True
- Add to _NON_SETUP_ENV_VARS set
- Document cross-signing verification in matrix.md E2EE section
- Update migration guide with recovery key step (step 3)
- Add to environment-variables.md reference
After the PgCryptoStore migration in v0.8.0, the verify_with_recovery_key
call that previously ran after share_keys() was dropped. On any rotation
that uploads fresh device keys (fresh crypto.db, server had stale keys
from a prior install, etc.), the new device keys carry no valid self-
signing signature because the bot has no access to the self-signing
private key.
Peers like Element then refuse to share Megolm sessions with the
rotated device, so the bot silently stops decrypting incoming messages.
This restores the recovery-key bootstrap: on startup, if
MATRIX_RECOVERY_KEY is set, import the cross-signing private keys from
SSSS and sign_own_device(), producing a valid signature server-side.
Idempotent and gated on MATRIX_RECOVERY_KEY — no behavior change for
users who don't configure a recovery key.
Verified end-to-end by deleting crypto.db and restarting: the bot
rotates device identity keys, re-uploads, self-signs via recovery key,
and decrypts+replies to fresh messages from a paired Element client.
OpenAI OAuth refresh tokens are single-use and rotate on every refresh.
When Hermes refreshes a Codex token, it consumed the old refresh_token
but never wrote the new pair back to ~/.codex/auth.json. This caused
Codex CLI and VS Code to fail with 'refresh_token_reused' on their
next refresh attempt.
This mirrors the existing Anthropic write-back pattern where refreshed
tokens are written to ~/.claude/.credentials.json via
_write_claude_code_credentials().
Changes:
- Add _write_codex_cli_tokens() in hermes_cli/auth.py (parallel to
_write_claude_code_credentials in anthropic_adapter.py)
- Call it from _refresh_codex_auth_tokens() (non-pool refresh path)
- Call it from credential_pool._refresh_entry() (pool happy path + retry)
- Add tests for the new write-back behavior
- Update existing test docstring to clarify _save_codex_tokens vs
_write_codex_cli_tokens separation
Fixes refresh token conflict reported by @ec12edfae2cb221
After /model switches the model (both picker and text paths), the cached
agent's config signature becomes stale — the agent was updated in-place
via switch_model() but the cache tuple's signature was never refreshed.
The next turn *should* detect the signature mismatch and create a fresh
agent, but this relies on the new model's signature differing from the
old one in _agent_config_signature().
Evicting the cached agent explicitly after storing the session override
is more defensive — the next turn is guaranteed to create a fresh agent
from the override without depending on signature mismatch detection.
Also adds debug logging at three key decision points so we can trace
exactly what happens when /model + /retry interact:
- _resolve_session_agent_runtime: which override path is taken (fast
with api_key vs fallback), or why no override was found
- _run_agent.run_sync: final resolved model/provider before agent
creation
Reported: /model switch to xiaomi/mimo-v2-pro followed by /retry still
used the old model (glm-5.1).
The monitor_for_interrupt() and backup interrupt checks were calling
get_pending_message() which pops the message from the adapter's queue.
This created a race condition: if the agent finished naturally before
checking _interrupt_requested, the pending message was permanently lost.
Timeline of the race:
1. Agent near completion, user sends message
2. Level 1 guard stores message in adapter._pending_messages, sets event
3. monitor_for_interrupt() detects event, POPS message, calls agent.interrupt()
4. Agent's run_conversation() was already returning (interrupted=False)
5. Post-run dequeue finds nothing (monitor already consumed it)
6. result.get('interrupted') is False so interrupt_message fallback doesn't fire
7. User message permanently lost — agent finishes without processing it
Fix: change all three interrupt detection sites (primary monitor + two
backup checks) from get_pending_message() (pop) to
_pending_messages.get() (peek). The message stays in the adapter's queue
until _dequeue_pending_event() consumes it in the post-run handler,
which runs regardless of whether the agent was interrupted or finished
naturally.
Reported by @_SushantSays — intermittent message loss during long
terminal command execution, persisting after the previous fix (73f970fa)
which addressed monitor task death but not this consumption race.
Reject non-URL values (e.g. shell commands typed by mistake) in the
base URL prompt during provider setup. Previously any string was saved
as-is to .env, breaking connectivity when the garbage value was used
as the API endpoint.
Adds http:// / https:// prefix check with a clear error message.
The custom-endpoint flow already had this validation (line 1620);
this brings the generic API-key provider flow to parity.
Triggered by a user support case where 'nano ~/.hermes/.env' was
accidentally entered as GLM_BASE_URL during Z.AI setup.
The previous wording ('If one clearly matches') set too high a threshold,
and 'If none match, proceed normally' was an easy escape hatch for lazy
models. Now:
- Lowered threshold: 'matches or is even partially relevant'
- Added MUST directive and 'err on the side of loading' guidance
- Replaced permissive closer with 'only proceed without if genuinely none
are relevant'
This should reduce cases where the agent skips loading relevant skills
unless explicitly forced.
- Add openai/openai-codex -> openai mapping to PROVIDER_TO_MODELS_DEV
so context-length lookups use models.dev data instead of 128k fallback.
Fixes#8161.
- Set api_mode from custom_providers entry when switching via hermes model,
and clear stale api_mode when the entry has none. Also extract api_mode
in _named_custom_provider_map(). Fixes#8181.
- Convert OpenAI image_url content blocks to Anthropic image blocks when
the endpoint is Anthropic-compatible (MiniMax, MiniMax-CN, or any URL
containing /anthropic). Fixes#8147.
* fix: list all available toolsets in delegate_task schema description
The delegate_task tool's toolsets parameter description only mentioned
'terminal', 'file', and 'web' as examples. Models (especially smaller
ones like Gemma) would substitute 'web' for 'browser' because they
didn't know 'browser' was a valid option.
Now dynamically builds the toolset list from the TOOLSETS dict at import
time, excluding blocked, composite, and platform-specific toolsets.
Auto-updates when new toolsets are added.
Reported by jeffutter on Discord.
* chore: exclude moa and rl from delegate_task toolset list
- Add gosu for runtime privilege dropping from root to hermes user
- Support HERMES_UID/HERMES_GID env vars for host mount permission matching
- Switch to debian:13.4-slim base image
- Use uv venv instead of pip install --break-system-packages
- Pin uv and gosu multi-stage images with SHA256 digests
- Set PLAYWRIGHT_BROWSERS_PATH to /opt/hermes/.playwright so build-time
chromium install survives the /opt/data volume mount
- Keep procps for container debugging
Based on work by m0n5t3r in PR #5811. Stripped to hardening-only
changes (non-root, virtualenv, slim base); matrix deps, fonts, xvfb,
and entrypoint playwright download deferred to follow-up.
Add content-aware splitting to compact mode: short chat-like exchanges
(2-6 short lines without headings/lists/quotes) get separate message
bubbles for a natural chat feel, while structured content (tables,
headings with body, numbered lists) stays in a single message.
Cherry-picked from PR #7587 by bravohenry, adapted to the compact/legacy
split_per_line architecture from #7903.
When the agent calls process(action='wait') or process(action='poll')
and gets the exited status, the completion_queue notification is
redundant — the agent already has the output from the tool return.
Previously, the drain loops in CLI and gateway would still inject
the [SYSTEM: Background process completed] message, causing the
agent to receive the same information twice.
Fix: track session IDs in _completion_consumed set when wait/poll/log
returns an exited process. Drain loops in cli.py and gateway watcher
skip completion events for consumed sessions. Watch pattern events
are never suppressed (they have independent semantics).
Adds 4 tests covering wait/poll/log marking and running-process
negative case.
Add a 'tip of the day' feature that displays a random one-liner about
Hermes Agent features on every new session — CLI startup, /clear, /new,
and gateway /new across all messaging platforms.
- New hermes_cli/tips.py module with 210 curated tips covering slash
commands, keybindings, CLI flags, config options, tools, gateway
platforms, profiles, sessions, memory, skills, cron, voice, security,
and more
- CLI: tips display in skin-aware dim gold color after the welcome line
- Gateway: tips append to the /new and /reset response on all platforms
- Fully wrapped in try/except — tips are non-critical and never break
startup or reset
Display format (CLI):
✦ Tip: /btw <question> asks a quick side question without tools or history.
Display format (gateway):
✨ Session reset! Starting fresh.
✦ Tip: hermes -c resumes your most recent CLI session.
Remove auto-archival from hermes claw migrate — not its
responsibility (hermes claw cleanup is still there for that).
Skip MESSAGING_CWD when it points inside the OpenClaw source
directory, which was the actual root cause of agent confusion
after migration. Use Path.is_relative_to() for robust path
containment check.
Salvaged from PR #8192 by opriz.
Co-authored-by: opriz <opriz@users.noreply.github.com>
- Add rebrand_text() that replaces OpenClaw, Open Claw, Open-Claw,
ClawdBot, and MoltBot with Hermes (case-insensitive, word-boundary)
- Apply rebranding to memory entries (MEMORY.md, USER.md, daily memory)
- Apply rebranding to SOUL.md and workspace instructions via new
transform parameter on copy_file()
- Fix moldbot -> moltbot typo across codebase (claw.py, migration
script, docs, tests)
- Add unit tests for rebrand_text and integration tests for memory
and soul migration rebranding
Users whose credentials exist only in external files — OpenAI Codex
OAuth tokens in ~/.codex/auth.json or Anthropic Claude Code credentials
in ~/.claude/.credentials.json — would not see those providers in the
/model picker, even though hermes auth and hermes model detected them.
Root cause: list_authenticated_providers() only checked the raw Hermes
auth store and env vars. External credential file fallbacks (Codex CLI
import, Claude Code file discovery) were never triggered.
Fix (three parts):
1. _seed_from_singletons() in credential_pool.py: openai-codex now
imports from ~/.codex/auth.json when the Hermes auth store is empty,
mirroring resolve_codex_runtime_credentials().
2. list_authenticated_providers() in model_switch.py: auth store + pool
checks now run for ALL providers (not just OAuth auth_type), catching
providers like anthropic that support both API key and OAuth.
3. list_authenticated_providers(): direct check for anthropic external
credential files (Claude Code, Hermes PKCE). The credential pool
intentionally gates anthropic behind is_provider_explicitly_configured()
to prevent auxiliary tasks from silently consuming tokens. The /model
picker bypasses this gate since it is discovery-oriented.
