* feat(desktop): assignable themes per profile
The desktop skin was a single global preference, so every profile shared
one look. Make the theme assignment per profile: picking a theme assigns it
to the profile that's currently live, and switching profiles paints that
profile's own skin. A profile with no assignment inherits the global default,
so single-profile installs and existing setups are unchanged.
- themes/context.tsx: per-profile skin record in localStorage; ThemeProvider
follows $activeGatewayProfile; boot paint uses the last active profile's
theme to avoid a flash on a non-default relaunch; setTheme assigns to the
live profile (default profile also seeds the legacy global fallback).
- settings/appearance-settings.tsx: caption noting the theme is saved per
profile, shown only when more than one profile exists.
- i18n: themeProfileNote string across en/zh/zh-hant/ja.
- themes/profile-theme.test.ts: resolution + inheritance coverage.
* feat(desktop): make light/dark mode per profile too
The command palette / theme picker sets skin + mode together on each pick,
so leaving mode global meant a profile couldn't actually remember the full
look it was given (e.g. "Ember Dark" in one profile would render Ember Light
if another profile last flipped the global mode). Mirror the per-profile skin
record for light/dark mode: ThemeProvider resolves and applies the active
profile's mode on switch, the boot paint uses it, and setMode assigns to the
live profile (default profile also seeds the legacy global mode fallback).
* refactor(desktop): collapse per-profile skin/mode into one helper
Skin and mode were near-identical resolve/assign pairs with hand-rolled
try/catch around localStorage. Fold both into a single profilePref<T>
factory (resolve + assign, default profile seeds the legacy global) and
lean on storedString/persistString for the error-swallowing. Tests go
table-driven over both prefs since they share one contract. No behavior
change; -89 LOC.
* refactor(desktop): treat default profile as the global slot directly
"default" isn't a real profile — it is the legacy global value. Stop
double-writing (record['default'] + global) on assign; route default
straight to the global. resolve is unchanged: a profile with no record
entry already falls back to the global, so default reads it for free.
A brand-new session's first turn persists to the SessionDB a beat after
the gateway emits message.complete, so a refresh fired in that window gets
a listSessions(min_messages=1) page that omits the new row. sessionsToKeep()
already shields the *active* chat from this race, but a session you started
and then navigated away from is — at the next refresh — neither working,
pinned, nor active, so mergeSessionPage() evicts it. Nothing re-fetches
afterward, so it stays gone until the app restarts.
Track sessions whose turn just settled (a real working->idle transition) in
a short, auto-expiring grace window and add them to the merge keep-set. This
bridges the persist race for non-active chats without resurrecting deleted
rows (mergeSessionPage only revives rows still in the in-memory list, which
optimistic delete/archive already drop).
Repro: start a new chat, send a message, then click another session before
the reply lands — the new session vanishes from the sidebar.
* fix(desktop): require session ids for scoped gateway events
Drop unscoped stream, tool, and subagent events in the desktop renderer so async activity cannot attach to whichever chat is currently focused.
* fix(desktop): preserve unscoped session info events
Keep session.info out of the scoped-event drop list so global desktop runtime broadcasts still initialize UI state before a session is active.
Two independent reviewers flagged that applyBackendUpdate's in-progress and
error messages were inline English while the rest of the update overlay is
i18n'd. Move them into updates.applyStatus (preparing/pulling/restarting/
notAvailable/failed/noReturn) across en, ja, zh, zh-hant + types.
The no-return error said 'Backend updated but did not come back online' — but
once the connection drops the client can't know the update's exit code, only
that it was started and the backend is unreachable. Reword to not overclaim:
the update may not have completed.
Three rough edges in the remote backend apply flow:
- On success the overlay dropped to IDLE, briefly re-rendering the pre-install
'update available' view and then the generic 'you're all set' before settling.
Close the overlay outright once the backend is confirmed back instead of
bouncing through the idle view.
- If the backend never came back (a failed restart), the flow still reported
success. waitForBackendReturn now returns whether the backend answered;
finishBackendApply surfaces an error when it didn't.
- The up-to-date copy said 'you're running the latest version', conflating
client and backend. Backend target now reads 'the backend is running the
latest version' — the client's own version is a separate pill.
The backend Install path set stage:'restart' and stopped — in remote mode no
boot-progress events arrive to carry the overlay to done, so it sat on the
restarting spinner until a manual reload while the backend had already come
back. Poll the backend until it answers again, then clear the overlay and
refresh the backend status. Target-aware applying copy explains the remote
restart + auto-reconnect instead of the local-updater-window wording.
Also switch the apply poll sleeps from window.setTimeout to globalThis.setTimeout
so the flow is exercisable off the renderer.
HERMES_DESKTOP_REMOTE_URL forces a remote connection but never writes
connection.json, so the gateway panel read mode/url from persisted config
and mislabelled an env-remote session as local with no url.
The poller starts at mount, before the gateway connects, so its initial
checkBackendUpdates() ran while mode was still unset and no-op'd via the
remote-mode guard — leaving the backend button empty until the user clicked it.
Subscribe to $connection and re-check the backend when mode resolves to remote.
Two follow-ups from testing the two-button bar:
- The background poller and focus handler only checked the client, so the
backend behind-count and changelog stayed empty until the user opened the
overlay — and the overlay's first render then hit the empty-commits fallback
('Improvements and fixes') instead of the real changelog. Check the backend
alongside the client on poller start, interval, and focus so its state is
ready before the button is clicked.
- Order the status bar client-first, backend-second.
The status bar merged both versions into one pill with a single click target,
so there was no way to tell which artifact an update acted on — and the apply
path was overloaded by connection mode. Separate them:
- store: independent client (checkUpdates/applyUpdates) and backend
(checkBackendUpdates/applyBackendUpdate) flows with their own status/apply
atoms; openUpdateOverlayFor(target) drives the overlay.
- status bar: two buttons — client vX (always) and backend vY (+N) (remote
only), each with its own behind-count, opening the overlay for its target.
- overlay: reads the active target's atoms; install/check route per target.
Removes the version-bar merge helper (no longer merging the two versions).
The updates overlay showed generic 'New update available / improvements and
fixes' with no indication of whether it was updating the client or the backend.
In remote mode it now reads 'Backend update available' and names the connected
backend, and when there's no commit changelog (e.g. pip/non-git backend) it
degrades to honest 'release notes aren't available for this install type' copy
instead of filler.
Copy selection extracted to a pure resolveUpdateCopy() helper (unit-tested);
threads target ('client'|'backend') from connection.mode through the overlay.
In remote mode, checkUpdates()/applyUpdates() branch on connection.mode and
drive the existing updates overlay from the connected backend instead of the
local Electron git bridge:
- checkUpdates -> GET /api/hermes/update/check, mapped onto DesktopUpdateStatus
(behind, commits, supported=can_apply, message). The overlay renders the
commit list as 'what's changed' and shows guidance (not Install) when the
backend install can't self-apply (docker/nix).
- applyUpdates -> POST /api/hermes/update (the proven command-center path),
polling the action to completion and handling the expected mid-update
connection drop as the restart phase.
Local mode is unchanged. Adds checkHermesUpdate() to hermes.ts and a
BackendUpdateCheckResponse type.
In remote thin-client mode the Electron client and the backend it connects to
are separate installs that drift independently. The status bar previously showed
only the client version, hiding skew (e.g. client 0.15.1 talking to backend
0.16.0 looked fine).
Add a pure resolveVersionBar() helper (unit-tested) that, gated on
connection.mode === 'remote', renders both 'client vX · backend vY' from the
desktop appVersion and StatusResponse.version, and flags skew. Local mode is
byte-identical to before. Wire it into the status-bar version item.
eslint --fix (import sort + padding-line-between-statements) on sidebar/index.tsx
after cherry-picking @dangelo352's commits; add release.py AUTHOR_MAP entry so
CI doesn't block on the unmapped author email.
A packaged desktop app launches to a blank page with a bare
ERR_FILE_NOT_FOUND when dist/index.html isn't in the bundle (#39484).
This happens when the build step fails (e.g. a stale checkout that
fails typecheck) but electron-builder packages anyway, shipping an
empty dist/.
- build-time: scripts/assert-dist-built.cjs runs at the tail of the
`build` script and aborts before electron-builder if dist/index.html
or the vite JS bundle is missing/empty. Every packaging path
(pack, dist*) inherits it via `npm run build &&`.
- runtime: resolveRendererIndex() now logs a clear 'packaged without a
renderer bundle — rebuild with hermes desktop --force-build' message
when no index.html exists, instead of silently loading a missing path.
- runtime: resolveWebDist() logs when it falls back to an asar-internal
dist that isn't a real directory (the dashboard 404 class, #41327/#39472),
rather than returning an unservable path silently.
Adds scripts/assert-dist-built.test.cjs (node:test) covering the guard.
The dashboard backend serves HTTP 404 on all static routes (/, /assets,
/health) in packaged builds because resolveWebDist() points at
app.asar.unpacked/dist/, but dist/** was not listed in asarUnpack.
Add dist/** to the asarUnpack glob list so electron-builder extracts the
built frontend assets alongside the asar archive, making them accessible
to the Express static file server at runtime.
Fixes#41327
Desktop zoom shortcuts (Cmd/Ctrl +/-/0) and the View menu only called
webContents.setZoomLevel(), which mutates the live renderer but persists
nothing. On reload, renderer crash/restart, or page recreation the app
snapped back to the default zoom, so the shortcuts felt broken for users
who need larger text.
Persist the selected zoom in the renderer's own localStorage rather than a
main-process JSON file. localStorage is per-origin and survives the
renderer lifecycle automatically, so there's no atomic-write/userData file
machinery to maintain. The main process still owns setZoomLevel: every
zoom change is mirrored into localStorage via executeJavaScript, and the
value is read back and re-applied on did-finish-load (covering reloads and
crash recovery). Clamping to Electron's [-9, 9] range now happens once in
setAndPersistZoomLevel instead of at each call site.
* feat(desktop): hover-reveal collapsed chat sidebar as a fixed overlay
When the sessions sidebar is collapsed, hovering the left edge now floats
it back in as a fixed overlay over the main content instead of just being
hidden. The collapsed grid track stays at 0px so the panel never reserves
space — it slides over whatever's underneath and retracts on pointer-leave.
- PaneShell: new hoverReveal prop. When a pane is collapsed + hoverReveal,
render an edge hot-zone + a side-anchored floating panel (absolute, full
height, honors any persisted resize width) that slides in on hover/focus.
- ChatSidebar: force the (otherwise opacity-0 when collapsed) sidebar fully
visible + interactive while the overlay is revealed, via an
in-data-[pane-hover-reveal=open] variant.
- desktop-controller: opt the chat-sidebar pane into hoverReveal.
* feat(desktop): lower window minWidth 900→400
Lets the window shrink to a narrow rail (e.g. for the collapsed
hover-reveal sidebar) instead of being floored at 900px.
* fix(desktop): render full sidebar content in hover-reveal overlay
The hover-reveal overlay showed only the nav rail — session rows, search,
pinned/recents were gated behind `sidebarOpen` (false while collapsed), so
they never mounted in the floated panel.
Add a $sidebarRevealed store the PaneShell overlay drives via a new
onHoverRevealChange callback, and gate ChatSidebar's content on
`sidebarOpen || sidebarRevealed` (contentVisible) instead of raw open
state. The overlay now shows the complete sidebar.
* fix(desktop): drop shadow on hover-reveal sidebar overlay
* feat(desktop): hover-reveal the file-browser sidebar too
The reveal mechanism already lives in the shared Pane primitive — the
right rail just opts in with hoverReveal. Its content renders
unconditionally, so (unlike the chat sidebar) it needs no extra
content-visibility gating.
* clean(desktop): tighten hover-reveal pane code
KISS pass — flatten the translate ternary, derive a single `revealed`,
inline the edge style, drop the redundant set-guard, and trim comments to
the house one-liner style. No behavior change.
* fix(desktop): stop hiding sidebar nav labels on narrow windows
The nav labels (New session, Skills, …) and the ⌘N hint were gated on a
viewport breakpoint (max-[46.25rem]:hidden), so shrinking the window hid
them even when the sidebar itself was wide — including in the hover-reveal
overlay. Drop the gate; the label already truncates (min-w-0 flex-1) so it
ellipsizes gracefully in a narrow rail, and contentVisible already hides it
when collapsed to the icon rail.
* feat(desktop): auto-collapse both sidebars below 600px into hover-reveal
Add a Pane `forceCollapsed` prop — collapses the track without writing to
the store (so the saved open state restores when the window widens) while
keeping hoverReveal alive (unlike `disabled`, which suppresses it).
desktop-controller watches (max-width: 600px) and force-collapses the chat
sidebar + file browser, so on a narrow window both rails get out of the way
and the hover-reveal overlay becomes the way in.
* feat(desktop): hover-intent + refined easing for sidebar reveal
- Gate the reveal on pointer velocity: the full-height edge hot-zone now
only arms on a slow, deliberate pass (<=0.55 px/ms). Fast sweeps toward
the titlebar/statusbar — or off the window — blow past the threshold and
never trigger, so the wide hit area stops being a nuisance.
- Swap the slide easing to cubic-bezier(0.32,0.72,0,1) at 260ms (snappy-out,
soft-land) for a more serious-app feel.
* fix(desktop): don't reveal sidebar during window resize
Resizing the window parks the cursor on the screen edge and fires slow
pointermoves over the hot-zone, reading as deliberate intent. Guard the
reveal on (a) e.buttons !== 0 — any button-held drag, incl. edge-resize —
and (b) a 250ms cooldown after any window resize event.
* feat(desktop): hoverIntent-style poll gate + inert contents during slide
Replace the single-sample velocity check (too eager — fired on any one slow
move, incl. resize drift) with a port of Brian Cherne's hoverIntent: poll
the pointer every 90ms and only arm once it has *settled* (moved <5px between
two consecutive polls inside the edge zone). Fly-bys, pass-throughs, and
resize drift never produce two close samples in a row, so they don't trigger.
Also keep the revealed panel's CONTENTS pointer-events-none until the slide-in
transition finishes (onTransitionEnd → settled), so you can't misclick a
session row mid-animation. Resets on retract.
* fix(desktop): no cursor/hit-test leak before reveal settles
The edge hot-zone showed cursor:pointer the instant the pointer touched it —
before the panel was armed or in view. And contents were inert but the panel
itself still hit-tested, so the cursor could flip mid-slide. Fix: hot-zone is
cursor-default (it's invisible), and the whole panel is pointer-events-none
until revealed && settled, so the cursor never changes or lands on a row
before the slide-in finishes.
* fix(desktop): geometry-driven close so revealed panel always retracts
The revealed panel relied on its own onPointerLeave to close — but a panel
that slid in under a still cursor (or whose contents were inert during the
slide) never fires enter/leave, so it got stuck open (esp. the file browser).
onTransitionEnd also bubbled from the file-tree's own row transitions,
tripping the settled flag wrongly.
Replace with a document-level pointermove watcher that closes once the cursor
leaves the panel's bounding rect + a 24px grace — independent of pointer-events
state or what the contents do. Gate interactivity on a simple slide-duration
timer (interactive) instead of the fragile transitionEnd, so the cursor still
can't flip or land on a row before the panel is in view.
* feat(desktop): make sidebar toggle shortcuts reveal when force-collapsed
mod+b / mod+j were no-ops on a narrow (force-collapsed) window — they
flipped the store but the pane ignores it. Now the toggle handlers also
dispatch PANE_TOGGLE_REVEAL_EVENT; a force-collapsed Pane listens (only while
overlayActive) and flips its hover-reveal, so the shortcut floats the rail in
(and back out) at this responsive breakpoint.
* refactor(desktop): name the 600px sidebar collapse breakpoint
Hoist the inline '(max-width: 600px)' literal into
SIDEBAR_COLLAPSE_BREAKPOINT_PX + SIDEBAR_COLLAPSE_MEDIA_QUERY in
layout-constants, so the responsive collapse point is a single named source
of truth instead of a magic string in the controller.
* tweak(desktop): sidebar auto-collapse breakpoint 600px -> 768px
768 is the standard md breakpoint and a more honest 'no room to dock' point.
* tweak(desktop): halve sidebar reveal slide duration 260ms -> 130ms
* Revert "tweak(desktop): halve sidebar reveal slide duration 260ms -> 130ms"
This reverts commit 6009a13200.
* perf(desktop): pre-mount hover-reveal contents to kill slide-in stall
The reveal mounted the (heavy, virtualized) sidebar contents in the same
frame the slide started, so the browser stalled painting the transform until
the mount finished — a ~100-200ms beat before the panel moved, very visible
on the instant keyboard toggle (hover masked it via the 90ms intent poll).
Report overlayActive (collapsed-overlay mode) rather than the live reveal
state to the mount consumer, so contents stay mounted off-screen while
collapsed and reveal is a pure transform. Visibility is still driven
separately by the data-pane-hover-reveal attr + the slide transform.
* fix(desktop): make reveal hotkey spammable
Two throttles on the reveal toggle:
- The handler fired both the reveal event AND toggleSidebarOpen() per press;
the store write hits localStorage synchronously every keystroke + recomputes
the grid, janking rapid presses. When collapsed, only dispatch the reveal
event (the store toggle was a no-op anyway).
- The geometry close-watcher slammed a keyboard-opened panel shut on the first
stray pointermove (trackpad jitter), fighting hotkey spam. Keyboard reveals
now ignore geometry until the cursor actually enters the panel, then the
mouse takes over.
* fix(desktop): inset reveal hot-zone past the OS window-resize gutter
The hot-zone sat flush at the window edge (left-0/right-0), overlapping the
OS resize grab strip — reaching to drag-resize naturally slows the cursor
there, which hoverIntent reads as settled and reveals before the resize drag
even starts. Inset the hot-zone 8px so the outermost edge stays a pure
resize/drag region and only an intentful move just inside it arms a reveal.
* fix(desktop): keep reveal hot-zone at edge, gate arming past resize gutter
Insetting the hot-zone made it unreachable when moving fast. Instead, anchor
the zone flush at the edge (w-4, always captures the pointer) but only ARM the
reveal when the cursor settles >=8px in from the edge — so a resize-reach that
parks on the outermost OS grab strip never triggers, while a deliberate move
into the zone still does. Keeps polling while in the gutter so moving inward
still arms.
* refactor(desktop): rebuild hover-reveal as pure CSS, delete the JS state machine
The hand-rolled pointer state machine (hoverIntent poll, refs, timers, document
pointermove geometry-close, interactive gate, resize cooldowns, keyboard-held
suppression) was fragile and side/instance-specific — hover broke on the right
rail, keyboard toggles triggered phantom animations, resize popped it open.
Replace all of it with the native primitive: CSS group-hover drives the slide
transform; a transition-delay on enter (instant on leave) is the hover-intent
gate (a fast pass-by doesn't dwell long enough to open); a thin edge trigger
inset past the OS resize grab strip arms it; and a single `forced` bool
(data-forced, toggled by the keyboard event) pins it open. Side-agnostic by
construction — group-hover doesn't care which edge or which pane.
Net: ~200 lines of imperative pointer logic → ~40 lines of declarative CSS.
* fix(desktop): don't animate hover-reveal panel across viewport on side flip
Flipping panes changed the off-screen transform from -translateX (off the
left) to +translateX (off the right). transition-transform interpolated
between them, passing through translate-x-0 (fully on-screen) mid-way — so the
hidden panel visibly slid across the window to reach its new hiding spot.
Key the panel on side so it remounts off-screen on the new edge with no
transition to play.
* clean(desktop): tighten hover-reveal markup
KISS pass on the CSS-driven reveal: reuse the existing `side` instead of a
local `left`, move the static duration/ease to inline style (drop two
single-use CSS vars + their arbitrary-value classes, keep only the
state-dependent enter-delay var), and trim comments to the house one-liner
density. No behavior change.
* fix(desktop): inset titlebar past traffic lights when sidebar is force-collapsed
The titlebar content inset (clearing the macOS traffic lights) keyed off the
stored sidebarOpen/fileBrowserOpen, but below the collapse breakpoint both
rails are force-collapsed so the left edge is uncovered while the store still
says open — content (the intro wordmark) overflowed under the lights. Gate
leftEdgePaneOpen on !narrowViewport using the shared SIDEBAR_COLLAPSE_MEDIA_QUERY.
Also rename the now-misleading reveal plumbing to match what it actually does:
onHoverRevealChange -> onOverlayActiveChange, $sidebarRevealed ->
$sidebarOverlayMounted (+ setter/consumer). It reports/stores collapsed-overlay
mode (mount gate), not live reveal state.
* feat(desktop): small --nous-shadow lift on revealed hover-reveal panels
Add a --nous-shadow token (white-based on light, black-based on dark) and apply
it to the floating sidebar panel only while revealed (group-hover / data-forced)
so it reads as lifted off the surface. No shadow on the off-screen panel.
* feat(desktop): shadow-reveal lift on revealed hover-reveal panels
Mirror the --shadow-nous layered falloff into a new --shadow-reveal token whose
drop color flips per mode (white on light, black on dark) via --shadow-reveal-raw
set in :root / :root.dark. Apply the generated shadow-reveal utility to the
floated panel only while revealed (group-hover / data-forced). Leaves the shared
--shadow-nous untouched.
* feat(desktop): use tuned reveal shadow, drop per-mode token
Replace the --shadow-reveal token machinery with Brooklyn's tuned literal
(0 -18px 18px -5px #0000003b) inline per-panel via --reveal-shadow, y-offset
sign flipped for the right side. Same color both modes. Reverts styles.css to
pristine (token removed).
* fix(desktop): use the reveal shadow verbatim, don't invert it per side
Flipping the y-offset sign for the right side inverted the shadow's direction
(cast-up -> cast-down), making it read heavier — not a mirror. The mirror axis
for a left/right panel is offset-x, which is 0 here, so both sides take the
tuned value as-is: 0 -18px 18px -5px #0000003b.
* clean(desktop): hoist reveal shadow to a named const
Move the inline reveal-shadow literal to HOVER_REVEAL_SHADOW alongside the
other HOVER_REVEAL_* tuning consts; drop the now-stale per-side comment.
* fix(desktop): truncate titlebar title before the right tool cluster
The session title used a hardcoded max-w-[52vw] that's blind to where the
right-side tools start, so it ran under them at narrow widths / with pane
tools present. Bound the title container by the same vars the titlebar drag
region uses (--titlebar-content-inset + --titlebar-tools-right +
--titlebar-tools-width) so it truncates exactly at the cluster's left edge.
* fix(desktop): responsive markdown tables — floor width + nowrap headers
The wrapper had overflow-x-auto but the table was w-full with auto layout, so
instead of scrolling it crushed columns until even header words broke mid-word
(Tim/e, Nig/ht). Add a min-w-[18rem] floor so it scrolls horizontally when the
column is narrower than readable, and whitespace-nowrap on th so headers never
break mid-word. Above the floor it still wraps cells naturally.
* fix intro
The status-bar zap currently toggles per-session approval bypass (the same
scope as the TUI's Shift+Tab). This adds a global escape hatch: Shift+clicking
the zap flips the persistent approvals.mode in config.yaml between "off"
(bypass on) and "manual" (bypass off), affecting every session, the CLI, the
TUI, and cron — and it survives restarts.
- statusbar-controls: thread the click's shiftKey through onSelect via a new
StatusbarSelectModifiers arg.
- yolo-session: add setGlobalYolo() that calls config.set with scope="global".
- use-statusbar-items: branch toggleYolo on modifiers.shiftKey; plain click
stays per-session, Shift+click goes global.
- tui_gateway config.set "yolo" key: add scope="global" that reads/writes
approvals.mode through the gateway's own (mtime-cached) config view, honors
an explicit value, and re-emits session.info to every live session so each
window's zap reflects the flip immediately.
- i18n: tooltip copy in en/ja/zh/zh-hant notes Shift+click toggles globally.
Tests: two new tui_gateway tests cover the global toggle and explicit-value
paths; existing session/process-scope yolo tests still pass.
The desktop chat GUI pinned the viewport to the bottom on every content
growth while a turn streamed, so the window chased tokens as they arrived.
Remove that follow behavior: once a turn is running the viewport stays
exactly where the user left it.
- Delete the streaming ResizeObserver re-pin loop in useThreadScrollAnchor.
- Delete the post-run bottom lock (kept pinning ~1.2s after completion).
- Keep the one-time jump-to-bottom on user submit / new turn / session
change so a freshly submitted message still lands in view.
- Update streaming.test.tsx to assert the viewport no longer follows
streaming growth or snaps down on final code-highlight remeasure.
After sleep/wake, a remote (global-remote) primary backend can become
unreachable, but it has no child process whose 'exit' clears the main
process's cached connectionPromise. The renderer then re-dials the same
dead remote forever and the composer stays stuck on "Starting Hermes…";
only a quit+reopen recovered.
Fix: the renderer's existing backoff-paced reconnect loop now asks the
main process to revalidate the cached connection before re-dialing. The
main process liveness-probes the cached REMOTE backend's public
/api/status and, if unreachable, drops the cache (resetHermesConnection
only nulls connectionPromise for a remote — no child to SIGTERM) so the
next getConnection() rebuilds a reachable descriptor. Local backends are
never touched here; they self-heal via the child 'exit' handler. The
renderer's loop already provides retry pacing and rides out transient
blips, so no streak/episode bookkeeping is needed in the main process.
The boot hook dismisses the boot-progress overlay on the post-rebuild
'open' so an in-place rebuild can't leave it stuck at ~94%.
Reimplements #40135 by @AlchemistChaos on a smaller, more interpretable
path (63 added lines vs 555): no extracted helper module, no
failure-streak / episode-window state, the renderer's backoff loop is
the retry mechanism. Original diagnosis and fix by @AlchemistChaos.
Co-authored-by: AlchemistChaos <alchemistchaos@protonmail.com>
Desktop connected to a remote gateway can now attach images and PDFs and
display agent-written images. Previously the desktop passed a LOCAL file path
to image.attach; on a remote gateway that path doesn't exist, so the image was
silently dropped ("skipped unreadable path") and the vision model never saw it.
The reverse direction was also broken — images the agent wrote on the gateway
rendered as dead links in the remote client.
Gateway (tui_gateway/server.py):
- image.attach_bytes: base64 byte upload written into the gateway's own images
dir and queued via the existing native-image-attach pipeline. Magic-byte
extension sniffing, data-URL prefix + whitespace tolerance, 25 MB cap,
structured error codes. Accepts content_base64/filename (canonical) and
data/ext (older-desktop aliases).
- pdf.attach: renders each page to PNG via pdftoppm (poppler-utils) at 150 DPI
and queues the pages as images; 50 MB / 25-page caps. Accepts host path or
base64 upload.
- Shared helpers (_decode_attach_base64, _sniff_image_ext, _queue_attached_image)
so the two methods and the existing image.attach don't duplicate logic.
Gateway (hermes_cli/web_server.py):
- GET /api/media: returns a gateway-local image as a base64 data URL so remote
clients can display it. Auth-gated like every /api route, extension
allowlist + size cap, AND confined to the gateway's own media roots
(images/screenshots/cache, resolved symlink-safe) so an authed caller can't
read image-extension files anywhere on disk.
Desktop (apps/desktop):
- syncImageAttachmentsForSubmit uploads bytes via image.attach_bytes when the
connection mode is 'remote'; the local fast path is unchanged.
- media.ts gains isRemoteGateway() + gatewayMediaDataUrl(); directive-text and
markdown-text fetch images over /api/media in remote mode.
Consolidates the competing remote-media PRs (#38876, #40317, #21908, #39437)
into one coherent implementation, taking the strongest parts of each and adding
shared-helper cleanup plus the /api/media root-confinement hardening on top.
The per-profile gateway switching from #38876 is intentionally left out as a
separable feature. TUI file uploads (#40492) remain a separate surface.
Tested: 11 new tui_gateway tests + 5 /api/media endpoint tests + desktop
media.remote unit tests; full tui_gateway + web_server suites green (472
passed); tsc -b clean; E2E verified the full attach→disk→queue and
gateway-path→data-URL display round-trip plus the out-of-root security block.
Co-authored-by: Max Mitcham <maxmitcham@mac.home>
Co-authored-by: Justlrnal4 <Justlrnal4@users.noreply.github.com>
Co-authored-by: Chris Cook <ccook@nvms.com>
Co-authored-by: Thomas Paquette <thomas.paquette@gmail.com>
* feat(desktop): surface TTS/STT/terminal backends as Settings dropdowns
Every native tool backend that the agent supports now shows up as a
clickable picker in the desktop Settings UI instead of a free-text box.
Desktop Settings renders a config field as a <Select> only if its dotpath
is a key in ENUM_OPTIONS (helpers.ts::enumOptionsFor returns undefined ->
free-text <Input> otherwise). Three backend-selector fields were surfaced
in their sections but missing from the map, so users had to hand-type the
provider name and could reasonably assume it was unsupported:
- tts.provider — now lists all built-in TTS backends incl. xai (Grok)
- stt.provider — local/groq/openai/mistral/elevenlabs
- terminal.backend — local/docker/singularity/modal/daytona/ssh
Each list is kept in sync with its backend source of truth (TTS:
agent/tts_registry.py::_BUILTIN_NAMES + tools/tts_tool.py; STT + terminal:
hermes_cli/config.py / tools/terminal_tool.py). The existing
enumOptionsFor current-value-append keeps any hand-typed/legacy value
selected, and command-type TTS providers still work.
Reported for Grok/xAI TTS, which was already a fully-wired built-in
provider (tts.provider: xai + XAI_API_KEY) with no picker entry.
* feat(desktop): expose per-backend TTS/STT/terminal config fields in Settings
Completes the backend-coverage pass: not just the provider PICKER but every
backend's own config fields are now tunable from desktop Settings, so a user
who picks (e.g.) Grok TTS can also set its voice/language without hand-editing
config.yaml.
Also fixes the STT provider dropdown: added 'xai' (Grok STT), which the
transcription dispatcher (tools/transcription_tools.py) handles but the
config.py comment had omitted — the dispatch ladder is the source of truth.
New Settings fields (Voice section):
- TTS xai (voice_id, language), minimax (model, voice_id), mistral
(model, voice_id), gemini (model, voice), neutts (model, device),
kittentts (model, voice), piper (voice)
- STT openai (model), groq (model), mistral (model)
New Settings fields (Advanced section):
- terminal docker_image / singularity_image / modal_image / daytona_image
New ENUM_OPTIONS dropdowns: stt.provider (+xai), stt.openai.model,
stt.mistral.model, tts.openai.model, tts.elevenlabs.model_id,
tts.neutts.device. Each list mirrors the backend generator's accepted values
(tools/tts_tool.py, tools/transcription_tools.py, hermes_cli/config.py).
i18n: FIELD_LABELS/FIELD_DESCRIPTIONS cover all locales via the English
fallback in config-settings.tsx; added native translations to ja/zh/zh-hant.
Secrets (provider API keys, modal/daytona tokens, ssh host/key) intentionally
stay in Settings -> Keys as env vars, not duplicated as config fields.
The desktop statusbar turn timer read a single process-global $turnStartedAt,
set/cleared only for the active session. With multiple same-profile sessions
running at once, switching to session B reset the one shared clock, so
session A's still-running turn "restarted from zero" the moment you left it —
exactly the behaviour @Da7_Tech reported after the profile-scoped session work.
Move turnStartedAt onto ClientSessionState so each session owns its own turn
clock. The global atom now just mirrors whichever session is focused, written
on view-sync (the flush that already stages the active session's state). A
backgrounded turn keeps counting in its own cache entry, and focusing it
restores its real elapsed time instead of zeroing it.
Set/clear sites: message.start (seed), message.complete + error + interrupted
bail (clear), and the session.info running-state path (seed if missing / clear
on stop) so a turn that goes busy via session.info — e.g. resuming a session
that's already running — also gets a clock.
Note: the agent loop itself never froze — every same-profile session runs in
its own backend thread and background deltas are buffered per-session. This
fixes the timer-reset symptom; the "no live progress until you return" is
inherent to a single-view transcript and is out of scope here.
Packaged Desktop first-launch bootstrap no longer dies with a fatal HTTP
404 when install-stamp.json pins a commit that isn't fetchable from GitHub.
This only happens for locally-built desktop apps: write-build-stamp.cjs's
fromLocalGit() pins `git rev-parse HEAD`, which can be an unpushed commit
or dirty tree. CI builds stamp $GITHUB_SHA and are unaffected. The fix
unblocks the dev / self-builder workflow.
resolveInstallScript() now wraps the GitHub download in try/catch; on
failure it resolves ~/.hermes/hermes-agent/scripts/install.sh (the
already-installed agent checkout), copies it into bootstrap-cache, and
returns it as source 'installed-agent'. If the cache copy fails (read-only
FS), it uses the source path directly. With no installed checkout to fall
back to, the original error rethrows unchanged.
Download is now injectable via an optional _download param so the fallback
path is tested hermetically (no network).
Reported with a precise repro and suggested fix by @Tamaz-sujashvili (#40815).
Co-authored-by: Tamaz-sujashvili <56168197+Tamaz-sujashvili@users.noreply.github.com>
The desktop markdown preprocessor autolinks bare URLs by wrapping them in
<...>. RAW_URL_RE allowed '*' in its character classes, so a bold line with
a URL and no separating space — e.g. '**PR opened: https://.../pull/123**' —
greedily pulled the closing '**' into the href, producing a broken link and
an unterminated bold run. Exclude '*' from both URL character classes; '_'
and '~' (which can appear in real paths) are preserved.
The desktop sidebar fetched the unified cross-profile session list as
profile='all' and filtered it client-side by the active profile. On a
large multi-profile install the active profile's rows could be windowed
out of the cross-profile recency page entirely, so switching to a profile
agent showed an empty history panel (and the 'all' fetch could exceed the
15s IPC timeout on startup). Scope the fetch to the active profile so its
own page comes back on its merits, and bump the session-list IPC timeout
to 60s. profileScope is now a refreshSessions dep, so the existing
gateway-open effect re-pulls on profile switch.
Mirror the bootstrap-installer (Rust) fix in the Electron first-launch
runner. spawnPowerShell launched bare 'powershell.exe', trusting PATH to
contain %SystemRoot%\System32\WindowsPowerShell\v1.0 — the same latent
weakness that stalled the native installer at "0 of 0 steps" when PATH is
trimmed/truncated or stored as a non-expanding REG_SZ. Resolve by absolute
path first (%SystemRoot%/%windir%), then PATH (powershell 5.1 -> pwsh 7),
then bare name as last resort.
Make `powershell_under_root` visible under `cfg(test)` so the
%SystemRoot%\System32\WindowsPowerShell\v1.0\powershell.exe layout is
asserted on any host (the rest of the resolution is gated to Windows).
The native Windows installer spawned PowerShell via the bare program name
`powershell.exe`, which trusts PATH to contain
%SystemRoot%\System32\WindowsPowerShell\v1.0. On machines whose PATH was
trimmed or truncated (Windows silently drops entries once the variable
exceeds its length limit), the lookup fails and the spawn dies with
"program not found" before install.ps1 runs at all — the installer then
stalls at "0 of 0 steps".
Resolve PowerShell by absolute path first (%SystemRoot%/%windir%), then
fall back to PATH (powershell 5.1, then pwsh 7), then a bare name as a
last resort. Also include the resolved interpreter in the spawn-failure
context; the old message printed only the script path, which misleadingly
read as if the .ps1 itself was missing.
Regression guard for the emoji-fallback fix: checks DEFAULT_TYPOGRAPHY and every
defined builtin-theme fontSans/fontMono stack contains a color-emoji font.
None of the UI sans/mono font stacks (themes/presets.ts, styles.css) carry
emoji glyphs, so on platforms whose default text font lacks them (e.g. Linux)
emoji rendered as tofu boxes in the composer and chat.
Append a color-emoji fallback — Apple Color Emoji / Segoe UI Emoji / Segoe UI
Symbol / Noto Color Emoji / the `emoji` generic — to every font stack
(SYSTEM_SANS, SYSTEM_MONO, the Courier theme, and the CSS --dt-font-* defaults).
Text still uses the primary fonts; the browser only falls back for emoji
codepoints. Custom themes build on SYSTEM_* so they inherit it automatically.
Complete the desktop app's tool-backend configuration so it fully
mirrors `hermes tools`. The toolset config panel already did
enable/disable, provider selection, and API-key save/reveal/clear — the
one remaining gap was post-setup install hooks, which previously just
told the user to run the CLI.
Now a provider that declares a post_setup hook (browser Chromium,
Camofox, cua-driver, KittenTTS/Piper, ddgs, Spotify, Langfuse, xAI)
renders a 'Run setup' button that spawns the install via the
`POST /api/tools/toolsets/{name}/post-setup` endpoint and tails the
log inline, feeding the desktop activity rail — mirroring
command-center's runSystemAction poll loop. On completion the panel
refreshes so a now-installed backend reports itself ready.
- hermes.ts: runToolsetPostSetup(name, key) -> profile-scoped POST.
- toolset-config-panel.tsx: PostSetupRunner sub-component (Run setup
button + inline live log + activity-rail upsert + unmount guard),
replacing the CLI-only placeholder.
- i18n: replace the orphaned `toolsets.postSetup` (CLI redirect) string
with proper post-setup UI keys (hint / run / running / starting /
complete / error / failed) across en, ja, zh, zh-hant + types.
- test: post-setup run+poll+log-tail coverage; mock additions for
runToolsetPostSetup/getActionStatus/activity store.
Works against local AND remote backends: all calls route through the
desktop's single `hermes:api` IPC handler to connection.baseUrl, so a
connected remote configures the remote host's tools (keys -> remote
.env, install runs on the remote). Relies on the post-setup endpoint +
'hermes tools post-setup' CLI shipped in #40418.
Verification: tsc -b clean (all 5 locales), eslint clean (the lone
exhaustive-deps warning is pre-existing on origin/main), vitest 4/5
(new post-setup test passes; the failing 'saves an API key' test fails
identically on origin/main — pre-existing EnvVarActionsMenu drift).
* feat: uninstall the Chat GUI without removing the agent (CLI + desktop UI)
Adds a GUI-only uninstall path so people can remove the desktop Chat GUI
while keeping the Hermes agent + their config/sessions/.env, and surfaces
the three CLI uninstall modes inside the desktop app's Settings → About.
CLI:
- New hermes_cli/gui_uninstall.py: cross-platform discovery + removal of the
desktop GUI's artifacts (source-built dist/release/node_modules + build
stamp, the packaged app bundle, and the Electron userData dir) on Linux,
macOS, and Windows. Never touches the agent source, venv, or user data.
- `hermes uninstall --gui` removes only the Chat GUI; `--gui-summary` prints a
JSON install snapshot (used by the desktop UI to gate options + detect a
missing agent for a future lite client).
- `hermes uninstall --yes` / `--full --yes` now run non-interactively, sharing
the destructive sequence via a new _perform_uninstall() helper. The keep-data
and full flows also sweep the GUI artifacts.
Desktop:
- electron/desktop-uninstall.cjs: pure helpers mapping each mode (gui/lite/full)
to CLI flags, resolving the running app bundle per OS, and building the
detached cleanup script that waits for the app to exit, runs the Python
uninstall, and removes the bundle.
- IPC hermes:uninstall:summary / :run, preload bridge, and types.
- Settings → About "Danger zone" with the three options; agent-removing
options hide when no local agent is detected.
Tests: tests/hermes_cli/test_gui_uninstall.py (22 pass with the existing
uninstall tests), electron/desktop-uninstall.test.cjs (17 pass, wired into
test:desktop:platforms). Docs: desktop.md "Uninstalling" + cli-commands.md.
* fix(desktop): tear down backend process tree before GUI uninstall (Windows lock safety)
The desktop uninstall cleanup script waited only on the desktop app's own
PID, but a backend grandchild (gateway / pty terminal / hermes REPL) can
outlive it and keep hermes.exe + venv files mandatory-locked on Windows —
making the script's rmdir half-fail and leaving a partial install, the same
failure class as the self-update path's #37532.
- main.cjs: runDesktopUninstall now awaits releaseBackendLock() before
spawning the cleanup script — tree-kills every backend PID the desktop owns
(primary + pool) via taskkill /T /F and polls the venv shim until unlocked.
Extracted the shared core out of releaseBackendLockForUpdate so both the
update hand-off and the uninstaller use the identical, incident-hardened
teardown. No-op on macOS/Linux (no mandatory locks).
- desktop-uninstall.cjs: Windows cleanup script removes the bundle via a
bounded rmdir retry loop (10x, 1s) instead of a single rmdir, since Windows
releases directory handles lazily even after the holding process exits.
- Dropped a fragile tasklist|findstr reap-by-path attempt; the Electron-side
tree-kill-by-PID is the reliable mechanism.
Tests: desktop-uninstall.test.cjs updated for the retry-loop output (17 pass).
* fix(desktop): address review on GUI uninstall (venv self-delete, gates, wait-loop)
Resolves @OutThisLife's review on #40355:
1. full mode now gated on agent presence (needsAgent: true). It removes the
agent + user data, so on a lite client with no local agent it's hidden
like lite — no more offering to remove an agent that isn't there.
2. (Finding 3, the real bug) lite/full no longer rmtree the venv from the
venv's OWN python. On Windows a running python.exe is mandatory-locked, so
that half-fails. New lightweight 'python -m hermes_cli.uninstall --mode X'
entrypoint (stdlib-only imports) lets the desktop run agent-removing modes
under the SYSTEM python (findSystemPython) with PYTHONPATH=<agentRoot>, so
import hermes_cli resolves from source while the venv is torn down. Falls
back to venv python + logs when no system python (gui-only unaffected).
3. Windows wait-loop is now bounded (60 tries, matching POSIX) and matches the
PID as a whole space-delimited token via findstr (no substring 99->990
trap, no redundant bare find). set HERMES_HOME/PID/PYTHONPATH now quoted.
4. Renamed the misleading 'returns null for dev run' test — the dev-run safety
is shouldRemoveAppBundle(isPackaged=false), which the test now asserts.
Docs: note that --gui on a source checkout also sweeps node_modules/build
output. Tests: 18 python + 19 desktop pass.
Codify the desktop overlay/design conventions in apps/desktop/DESIGN.md:
surfaces & elevation (shadow-nous + --stroke-nous), stroke/color tokens, the
single Button (variants/sizes, no per-call overrides), shared form controls
(controlVariants / SearchField / SegmentedControl / Switch), flat layout
(PAGE_INSET_X, OverlaySplitLayout, ListRow, no card-in-card), feedback states
(Loader / ErrorState / LogView / EmptyState), BrandMark, motion, i18n, and the
nanostore state model. Ends with a pre-merge checklist.
Two fixes so the doc isn't aspirational:
- brand-mark: rounded-md + overflow-hidden (doc says "softly rounded")
- i18n ja/zh/zh-hant: mirror en's "Begin" + drop trailing period on
connectedProvider (doc says update all locales together)
The manage overlay held its own local jobs list, so deleting/creating a
job there left the sidebar's $cronJobs atom stale until the 30s poll
(delete all → section lingered). Make the overlay read and mutate the
shared atom directly (updateCronJobs), so sidebar + overlay are one
source of truth and changes show immediately.
active/createFirst/refresh/refreshing went unused when the cron overlay
moved to the shared split layout (no count header, no refresh button, no
EmptyState CTA). Remove from types + all four locales.
Cron's manage overlay now uses the shared OverlaySplitLayout (sidebar
list + main detail) instead of a bespoke PageSearchShell + grid, matching
profiles. Extract OverlayNewButton (the "+ New …" sidebar action) so
profiles and cron share one component — its hover underline is scoped to
the label span so it never strokes the leading icon glyph.
