Adds `hermes profile create <name> --no-skills` to create a profile with
zero bundled skills. Writes a `.no-bundled-skills` marker file in the
profile root so `hermes update`'s all-profile skill sync loop also skips
the profile — without the marker, every update would re-seed skills and
the user would have to delete them again.
Use case (from @hiut1u): orchestrator profiles and narrow-task profiles
don't need 100+ bundled skills polluting their system prompt.
- create_profile() gains a `no_skills` param, mutually exclusive with
`--clone` / `--clone-all` (cloning explicitly copies skills).
- seed_profile_skills() no-ops on opted-out profiles and returns
`{skipped_opt_out: True}` so callers can report cleanly.
- Web API (POST /api/profiles) accepts `no_skills: bool`.
- Delete `.no-bundled-skills` to opt back in — next `hermes update`
re-seeds normally.
6 new tests in TestNoSkillsOptOut cover marker write, mutual exclusion
with clone, seed_profile_skills opt-out, fresh profile unaffected, and
delete-marker-re-enables-seeding.
The setup wizard dropped non-root users at a bare shell prompt when
trying to start a system-scope gateway service. Previously
_require_root_for_system_service called sys.exit(1), which the
wizard's `except Exception` guards cannot catch (SystemExit is a
BaseException). Users with a pre-existing /etc/systemd/system unit
(e.g. from an earlier `sudo hermes setup` run) hit this whenever
they re-ran `hermes setup` as a regular user.
- Convert _require_root_for_system_service to raise a typed
SystemScopeRequiresRootError (RuntimeError subclass) instead of
sys.exit(1). The direct CLI path (`hermes gateway install|start|stop|
restart|uninstall` without sudo) still exits 1 cleanly via a new
catch at the top of gateway_command, matching the existing
UserSystemdUnavailableError pattern.
- Add _system_scope_wizard_would_need_root() pre-check and
_print_system_scope_remediation() helper. Both setup wizards
(hermes_cli/setup.py and hermes_cli/gateway.py::gateway_setup) now
detect the dead-end before prompting and print actionable guidance:
either `sudo systemctl start <service>` this time, or uninstall the
system unit and install a per-user one.
- Defense-in-depth: all 5 wizard prompt sites also catch
SystemScopeRequiresRootError and fall back to the remediation
helper if the pre-check is bypassed (race, etc.).
Tests: 12 new tests in TestSystemScopeRequiresRootError,
TestSystemScopeWizardPreCheck, TestSystemScopeRemediationOutput, and
TestGatewayCommandCatchesSystemScopeError covering the exception
contract, pre-check matrix (root vs non-root, system-only vs
user-present vs none vs explicit system=True), remediation output
for each action, and the direct-CLI exit-1 path.
* fix(tui): restore classic CLI voice push-to-talk parity
(cherry picked from commit 93b9ae301b)
* fix(tui): harden voice push-to-talk stop flow
Address review feedback from PR #16189 by stopping the active recorder before background transcription, documenting single-shot voice capture, and covering the TUI gateway flags with regression tests.
* fix(tui): preserve silent voice strike tracking
Keep single-shot voice recording's no-speech counter alive across starts so the TUI can still emit the three-strikes auto-disable event, and bind the auto-restart state at module scope for type checking.
* fix(tui): clean up voice stop failure path
Address follow-up review by naming the TUI flow as single-shot push-to-talk and cancelling the recorder when forced stop cannot produce a WAV.
* fix(tui): report busy voice capture starts
Return explicit start state from the voice wrapper so the TUI gateway does not report recording while forced-stop transcription is still cleaning up.
* fix(tui): handle busy voice record responses
Apply the gateway busy status immediately in the TUI and route forced-stop voice events to the session that sent the stop request.
* fix(tui): clear voice recording on null response
Treat a null voice.record RPC result as a failed optimistic start so the REC badge cannot stick after gateway-side errors.
* fix(tui): count silent manual voice stops
Preserve single-shot voice no-speech strikes through forced stop transcription so empty push-to-talk captures still trigger the three-strikes guard.
---------
Co-authored-by: Montbra <montbra@gmail.com>
Profile processes (kanban workers, cron subprocesses, delegated subagents)
read the profile's auth.json only. If a provider was authenticated at the
global root but not inside the profile, the profile's credential_pool
comes back empty and the process fails with 'No LLM provider configured'
— even though the credentials are sitting in ~/.hermes/auth.json. #18594
propagated HERMES_HOME correctly, which is what surfaced this: workers
now land in the right profile, and the profile turns out to shadow global
with no fallback.
Semantics (read-only, per-provider shadowing):
* Profile has any entries for provider X → use profile only (global ignored).
* Profile has zero entries for provider X → fall back to global.
* Writes (write_credential_pool, _save_auth_store) still target the profile.
* Classic mode (HERMES_HOME == global root) skips the fallback entirely —
_global_auth_file_path() returns None.
Also mirrors the fallback in get_provider_auth_state so OAuth singletons
(nous, minimax-oauth, openai-codex, spotify) inherit cleanly — the Nous
shared-token store (PR #19712) remains the authoritative path for Nous
OAuth rotation, this just makes the read side consistent with it.
Seat belt: _load_global_auth_store() refuses to read the real user's
~/.hermes/auth.json under PYTEST_CURRENT_TEST even when HERMES_HOME points
to a profile-shaped path. Guard uses $HOME (stable across fixtures) rather
than Path.home() (which fixtures often monkeypatch to a tmp root).
Reported by @SeedsForbidden on Twitter as the credential_pool shadowing
follow-up to the #18594 fix.
- Expand migration comment to name the primary failure mode (missing
column OperationalError from #20842) ahead of the secondary SQLite
schema-reparse concern; also document the stale-cols-snapshot invariant
- Add clarifying comments on from_row() legacy fallback branches noting
they are belt-and-suspenders dead code post-migration
- Add task_events comment in existing test explaining why the table is
required by the migrator
- Add test_legacy_migration_no_legacy_columns_at_all: Scenario A —
explicitly asserts the exact #20842 crash no longer occurs and that
consecutive_failures defaults to 0 on a DB that never had spawn_failures
- Add test_legacy_migration_both_columns_already_present: Scenario D —
asserts the migration is a no-op when both columns already exist,
preserving the existing counter value
Adds SearXNG as a free, self-hosted web search provider. SearXNG is a
privacy-respecting metasearch engine that requires no API key — just a
running instance and SEARXNG_URL pointing at it.
## What this adds
- `tools/web_providers/searxng.py` — `SearXNGSearchProvider` implementing
`WebSearchProvider` (search only; no extract capability)
- `_is_backend_available("searxng")` — gates on SEARXNG_URL
- `_get_backend()` — accepts "searxng" as a configured value; adds it to
auto-detect candidates (lower priority than paid services)
- `web_search_tool` — dispatches to SearXNG when it is the active backend
- `check_web_api_key()` — includes SearXNG in availability check
- `OPTIONAL_ENV_VARS["SEARXNG_URL"]` — registered with tools=["web_search"]
- `tools_config.py` — SearXNG appears in the `hermes tools` provider picker
- `nous_subscription.py` — `direct_searxng` detection, web_active / web_available
- `setup.py` — SEARXNG_URL listed in the missing-credential hint
- 23 tests covering: is_configured, happy-path search, score sorting, limit,
HTTP/request errors, _is_backend_available, _get_backend, check_web_api_key
## Config
```yaml
# Use SearXNG for search, any paid provider for extract
web:
search_backend: "searxng"
extract_backend: "firecrawl"
# Or: SearXNG as the sole backend (web_extract will use the next available)
web:
backend: "searxng"
```
SearXNG is search-only — it does not implement WebExtractProvider. Users
who only configure SEARXNG_URL get web_search available; web_extract falls
back to the next available extract provider (or is unavailable if none).
Closes#19198 (Phase 2 Task 4 — SearXNG provider)
Ref: #11562 (original SearXNG PR)
Introduce the foundation for independently selecting web search and
extract backends — enabling future combinations like SearXNG for
search + Firecrawl for extract.
Architecture:
- tools/web_providers/base.py: WebSearchProvider and WebExtractProvider
ABCs with normalized result contracts (mirrors CloudBrowserProvider)
- tools/web_tools.py: _get_search_backend() and _get_extract_backend()
read per-capability config keys, fall through to shared web.backend
- hermes_cli/config.py: web.search_backend and web.extract_backend in
DEFAULT_CONFIG (empty = inherit from web.backend)
Behavioral change:
- web_search_tool() now dispatches via _get_search_backend()
- web_extract_tool() now dispatches via _get_extract_backend()
- When per-capability keys are empty (default), behavior is identical
to before — _get_search_backend() falls through to _get_backend()
This is purely structural — no new backends are added. SearXNG and
other search-only/extract-only providers can now be added as simple
drop-in modules in follow-up PRs.
12 new tests, 49 existing tests pass with zero regressions.
Ref: #19198
Same Hermes Teal palette as the default theme, but with baseSize 18px,
lineHeight 1.65, and spacious density so the whole dashboard scales up.
Gives users a one-click bigger-text preset and a copyable reference for
authoring custom YAML themes with their own typography settings.
OpenCode Go and OpenCode Zen are flat-namespace model resellers — their
/v1/models returns bare IDs (deepseek-v4-flash, minimax-m2.7), and the
inference API rejects vendor-prefixed names with HTTP 401 'Model not
supported'. Two bugs fixed:
1. `switch_model` in hermes_cli/model_switch.py was silently switching the
user off opencode-go to native deepseek when they typed
`/model deepseek-v4-flash`. Step d found the model in opencode-go's live
catalog, but step e (detect_provider_for_model) still ran and matched
the bare name against deepseek's static catalog. Fix: track whether
the live catalog resolved it; skip step e when it did.
2. `normalize_model_for_provider` in hermes_cli/model_normalize.py only
stripped the exact `opencode-zen/` prefix, leaving arbitrary vendor
prefixes like `minimax/minimax-m2.7` (commonly copied from aggregator
slugs into fallback_model configs) intact — causing HTTP 401s when
the fallback chain activated. Fix: opencode-go/opencode-zen strip ANY
leading vendor prefix because their APIs are flat-namespace.
Tests: 11 new cases in tests/hermes_cli/test_opencode_go_flat_namespace.py
covering both normalization (prefix stripping, regression guards for
opencode-zen Claude hyphenation and openrouter vendor-prepending) and
switch_model (bare-name resolution on opencode-go's live catalog must
not trigger cross-provider hijack).
Reported by @Ufonik via Discord; Kimi K2.6 always worked because moonshotai
has no overlapping entry in a native provider's static catalog. Deepseek
and minimax failed because their v4/v2.7 names existed in the native
deepseek/minimax catalogs.
* feat(skills/linear): add Documents support + Python helper script
The bundled Linear skill (PR #1230) covered issues, projects, teams, and
workflow states via curl. It had no coverage for Linear's Documents API,
so fetching an RFC/doc from a linear.app URL required hand-writing
GraphQL against an underdocumented schema.
Adds:
- Documents section in SKILL.md explaining slugId extraction from URLs,
the contentState (markdown) vs contentState (ProseMirror) split, and
four canonical curl examples (fetch by slugId, fetch by UUID, list
recent, title-search).
- scripts/linear_api.py — stdlib-only Python CLI wrapping the most
common operations (whoami, list-teams, list/get/search/create/update
issues, add-comment, update-status, list/get/search documents, raw
GraphQL passthrough). Zero deps, reads LINEAR_API_KEY from env.
Auth header quirk (personal key takes bare $LINEAR_API_KEY, no Bearer
prefix) is already documented in the skill.
Found during RFC review: the existing skill's lack of document support
forced falling back to the browser (which hit Linear's login wall).
Also fixes a schema gotcha — the Document field is `contentState`, not
`contentData` (which returns 400).
Tested end-to-end against the production API:
python3 linear_api.py whoami
python3 linear_api.py get-document 38359beef67c
Both return expected payloads.
* fix(skills/linear): point LINEAR_API_KEY setup to the correct page
The org-level Settings > API page (/settings/api) only shows OAuth apps
and workspace-member keys. Personal API keys live under Account,
Security, access (/settings/account/security). Update both the setup
link in config.py (shown during hermes setup) and the setup step in
SKILL.md so users land on the page that can create a personal key.
* docs(providers): add model-provider-plugin authoring guide + fix stale refs
New docs:
- website/docs/developer-guide/model-provider-plugin.md — full authoring
guide (directory layout, minimal example, ProviderProfile fields,
overridable hooks, user overrides, api_mode selection, auth types,
testing, pip distribution)
- Wired into website/sidebars.ts under 'Extending'
- Cross-references added in:
- guides/build-a-hermes-plugin.md (tip block)
- developer-guide/adding-providers.md
- developer-guide/provider-runtime.md
User guide:
- user-guide/features/plugins.md: Plugin types table grows from 3 to 4
with 'Model providers' row
Stale comment cleanup (providers/*.py → plugins/model-providers/<name>/):
- hermes_cli/main.py:_is_profile_api_key_provider docstring
- hermes_cli/doctor.py:_build_apikey_providers_list docstring
- hermes_cli/auth.py: PROVIDER_REGISTRY + alias auto-extension comments
- hermes_cli/models.py: CANONICAL_PROVIDERS auto-extension comment
AGENTS.md:
- Project-structure tree: added plugins/model-providers/ row
- New section: 'Model-provider plugins' explaining discovery, override
semantics, PluginManager integration, kind auto-coerce heuristic
Verified: docusaurus build succeeds, new page renders, all 3 cross-links
resolve. 347/347 targeted tests pass (tests/providers/,
tests/hermes_cli/test_plugins.py, tests/hermes_cli/test_runtime_provider_resolution.py,
tests/run_agent/test_provider_parity.py).
* docs(plugins): add 'pluggable interfaces at a glance' maps to plugins.md + build-a-hermes-plugin
Devs landing on either the user-guide plugin page or the build-a-plugin
guide now get an upfront table of every distinct pluggable surface with
a link to the right authoring doc. Previously they'd have to read the
full general-plugin guide to discover that model providers / platforms
/ memory / context engines are separate systems.
user-guide/features/plugins.md:
- New 'Pluggable interfaces — where to go for each' section below the
existing 4-kinds table
- 10 rows covering every register_* surface (tool, hook, slash command,
CLI subcommand, skill, model provider, platform, memory, context
engine, image-gen)
- Explicit note: TTS/STT are NOT plugin-extensible yet — documented
with a pointer to the current config.yaml 'command providers' pattern
and a note that register_tts_provider()/register_stt_provider() may
come later
guides/build-a-hermes-plugin.md:
- New :::info 'Not sure which guide you need?' map at the top so devs
see all pluggable interfaces before investing in this 737-line
general-plugin walkthrough
- Existing bottom :::tip expanded to include platform adapters alongside
model/memory/context plugins
Verified:
- All 8 cross-doc links in the new plugins.md table resolve in a
docusaurus build (SUCCESS, no new broken links)
- TTS link corrected (features/voice → features/tts; latter exists)
- Pre-existing broken links/anchors (cron-script-only, llms.txt,
adding-platform-adapters#step-by-step-checklist) are unchanged
* docs(plugins): correct TTS/STT pluggability \u2014 they ARE plugins (command-providers)
Previous commit incorrectly said TTS/STT 'aren't plugin-extensible'. They
are, via the config-driven command-provider pattern \u2014 any CLI that reads
text and writes audio (or vice versa for STT) is automatically a plugin
with zero Python. The tts.md docs cover this extensively and I missed it.
plugins.md:
- TTS row: 'Config-driven (not a Python plugin)', points at
tts.md#custom-command-providers
- STT row: points at tts.md#voice-message-transcription-stt (STT docs
live in tts.md despite the filename)
- Expanded note: TTS/STT use config-driven shell-command templates as
their plugin surface (full tts.providers.<name> registry for TTS;
HERMES_LOCAL_STT_COMMAND escape hatch for STT)
- Any CLI that reads/writes files is automatically a plugin \u2014 no Python
register_* API needed
- Future register_tts_provider()/register_stt_provider() hooks mentioned
as nice-to-have for SDK/streaming cases, not as the primary story
build-a-hermes-plugin.md:
- Same map update: TTS/STT rows explicit, footer note corrected
Verified:
- tts.md anchors (custom-command-providers, voice-message-transcription-stt)
exist and resolve in docusaurus build (SUCCESS, no new broken links)
* docs(plugins): expand pluggable interfaces table with MCP / event hooks / shell hooks / skill taps
Broadened the scope beyond Python register_* hooks. Hermes has MULTIPLE
plugin-style extension surfaces; they're now all in one table instead of
being scattered across feature docs.
Added rows for:
- **MCP servers** — config.yaml mcp_servers.<name> auto-registers external
tools from any MCP server. Huge extensibility surface, previously not
linked from the plugin map.
- **Gateway event hooks** — drop HOOK.yaml + handler.py into
~/.hermes/hooks/<name>/ to fire on gateway:startup, session:*, agent:*,
command:* events. Separate from Python plugin hooks.
- **Shell hooks** — hooks: block in config.yaml runs shell commands on
events (notifications, auditing, etc.).
- **Skill sources (taps)** — hermes skills tap add <repo> to pull in new
skill registries beyond the built-in sources.
Both docs updated:
- user-guide/features/plugins.md: table column renamed to 'How' (mixes
Python API + config-driven + drop-in-dir surfaces accurately)
- guides/build-a-hermes-plugin.md: :::info map at top mirrors the new
surfaces with a forward-link to the consolidated table
Note block rewritten: instead of singling out TTS/STT as the 'different
style' exception, now honestly describes that Hermes deliberately
supports three plugin styles — Python APIs, config-driven commands, and
drop-in manifest directories — and devs should pick the one that fits
their integration.
Not included (considered and rejected):
- Transport layer (register_transport) — internal, not user-facing
- Tool-call parsers — internal, VLLM phase-2 thing
- Cloud browser providers — hardcoded registry, not drop-in yet
- Terminal backends — hardcoded if/elif, not drop-in yet
- Skill sources (the ABC) — hardcoded list, only taps are user-extensible
Verified:
- All 5 new anchors resolve (gateway-event-hooks, shell-hooks, skills-hub,
custom-command-providers, voice-message-transcription-stt)
- Docusaurus build SUCCESS, zero new broken links
- Same 3 pre-existing broken links on main (cron-script-only, llms.txt,
adding-platform-adapters#step-by-step-checklist)
* docs(plugins): cover every pluggable surface in both the overview and how-to
Both plugins.md and build-a-hermes-plugin.md now cover every extension
surface end-to-end \u2014 general plugin APIs, specialized plugin types,
config-driven surfaces \u2014 with concrete authoring patterns for each.
plugins.md:
- 'What plugins can do' table grows from 9 rows (general ctx.register_*
only) to 14 rows covering register_platform, register_image_gen_provider,
register_context_engine, MemoryProvider subclass, register_provider
(model). Each row links to its full authoring guide.
- New 'Plugin sub-categories' section under Plugin Discovery explains
how plugins/platforms/, plugins/image_gen/, plugins/memory/,
plugins/context_engine/, plugins/model-providers/ are routed to
different loaders \u2014 PluginManager vs the per-category own-loader
systems.
- Explicit mention of user-override semantics at
~/.hermes/plugins/model-providers/ and ~/.hermes/plugins/memory/.
build-a-hermes-plugin.md:
- New '## Specialized plugin types' section (5 sub-sections):
- Model provider plugins \u2014 ProviderProfile + plugin.yaml example,
auto-wiring summary, link to full guide
- Platform plugins \u2014 BasePlatformAdapter + register_platform() skeleton
- Memory provider plugins \u2014 MemoryProvider subclass example
- Context engine plugins \u2014 ContextEngine subclass example
- Image-generation backends \u2014 ImageGenProvider + kind: backend example
- New '## Non-Python extension surfaces' section (5 sub-sections):
- MCP servers \u2014 config.yaml mcp_servers.<name> example
- Gateway event hooks \u2014 HOOK.yaml + handler.py example
- Shell hooks \u2014 hooks: block in config.yaml example
- Skill sources (taps) \u2014 hermes skills tap add example
- TTS / STT command templates \u2014 tts.providers.<name> with type: command
- Distribute via pip / NixOS promoted from ### to ## (they were orphaned
after the reorganization)
Each specialized / non-Python section has a concrete, copy-pasteable
example plus a 'Full guide:' link to the authoritative doc. Devs arriving
at the build-a-hermes-plugin guide now see every extension surface at
their disposal, not just the general tool/hook/slash-command surface.
Verified:
- Docusaurus build SUCCESS, zero new broken links
- All new cross-links (developer-guide/model-provider-plugin,
adding-platform-adapters, memory-provider-plugin, context-engine-plugin,
user-guide/features/mcp, skills#skills-hub, hooks#gateway-event-hooks,
hooks#shell-hooks, tts#custom-command-providers,
tts#voice-message-transcription-stt) resolve
- Same 3 pre-existing broken links on main (cron-script-only, llms.txt,
adding-platform-adapters#step-by-step-checklist)
* docs(plugins): fix opt-in inconsistency — not every plugin is gated
The 'Every plugin is disabled by default' statement was wrong. Several
plugin categories intentionally bypass plugins.enabled:
- Bundled platform plugins (IRC, Teams) auto-load so shipped gateway
channels are available out of the box. Activation per channel is via
gateway.platforms.<name>.enabled.
- Bundled backends (plugins/image_gen/*) auto-load so the default
backend 'just works'. Selection via <category>.provider config.
- Memory providers are all discovered; one is active via memory.provider.
- Context engines are all discovered; one is active via context.engine.
- Model providers: all 33 discovered at first get_provider_profile();
user picks via --provider / config.
The plugins.enabled allow-list specifically gates:
- Standalone plugins (general tools/hooks/slash commands)
- User-installed backends
- User-installed platforms (third-party gateway adapters)
- Pip entry-point backends
Which matches the actual code in hermes_cli/plugins.py:737 where the
bundled+backend/platform check bypasses the allow-list.
Rewrote '## Plugins are opt-in' to:
- Retitle to 'Plugins are opt-in (with a few exceptions)'
- Narrow opening claim to 'General plugins and user-installed backends
are disabled by default'
- Added 'What the allow-list does NOT gate' subsection with a full
table of which bypass the gate and how they're activated instead
- Fixed migration section wording (bundled platform/backend plugins
never needed grandfathering)
Verified: docusaurus build SUCCESS, zero new broken links.
Replaces the per-directory shadow-repo design with a single shared shadow
git store at ~/.hermes/checkpoints/store/. Object DB is now deduplicated
across every working directory the agent has ever touched; a dozen
worktrees of the same project cost near-zero in additional disk.
Why
---
Pre-v2 design had three compounding problems that let ~/.hermes/checkpoints/
grow to multi-GB on active machines:
1. Each working directory got its own full shadow git repo — no object
dedup across projects or across worktrees of the same project.
2. _prune() was a documented no-op: max_snapshots only limited the
/rollback listing. Loose objects accumulated forever.
3. Defaults: enabled=True, auto_prune=False — users paid the disk cost
without ever asking for /rollback.
Field report on a single workstation: 847 MB across 47 shadow repos,
mostly redundant clones of the hermes-agent source tree.
Changes
-------
- tools/checkpoint_manager.py: full rewrite. Single bare store, per-project
refs (refs/hermes/<hash>), per-project indexes (store/indexes/<hash>),
per-project metadata (store/projects/<hash>.json with workdir +
created_at + last_touch). On first v2 init, any pre-v2 per-directory
shadow repos are auto-migrated into legacy-<timestamp>/ so the new
store starts clean. _prune() now actually rewrites the per-project ref
to the last max_snapshots commits and runs git gc --prune=now. New
_enforce_size_cap() drops oldest commits round-robin across projects
when the store exceeds max_total_size_mb. _drop_oversize_from_index()
filters any single file larger than max_file_size_mb out of the snapshot.
- hermes_cli/checkpoints.py: new 'hermes checkpoints' CLI
(status / list / prune / clear / clear-legacy) for managing the store
outside a session.
- hermes_cli/config.py: flipped defaults — enabled=False, max_snapshots=20,
auto_prune=True. Added max_total_size_mb=500, max_file_size_mb=10.
Tightened DEFAULT_EXCLUDES (added target/, *.so/*.dylib/*.dll,
*.mp4/*.mov, *.zip/*.tar.gz, .worktrees/, .mypy_cache/, etc.).
- run_agent.py / cli.py / gateway/run.py: thread the new kwargs through
AIAgent and the startup auto_prune hooks.
- Tests rewritten to match v2 storage while keeping backwards-compat
coverage for the pre-v2 prune path (per-directory shadow repos under
base/ are still swept correctly for anyone mid-migration).
- Docs updated: user-guide/checkpoints-and-rollback.md explains the
shared store, new defaults, migration, and the new CLI;
reference/cli-commands.md documents 'hermes checkpoints'.
E2E validated
-------------
- Legacy migration: pre-v2 shadow repos auto-archived into legacy-<ts>/.
- Object dedup: two projects with an identical shared.py blob resolve to
7 total objects in the store (v1 would have stored the blob twice).
- max_snapshots=3 actually enforced: after 6 commits, list shows 3.
- Orphan prune: deleting a project's workdir + 'hermes checkpoints prune
--retention-days 0' removes its ref, index, and metadata; GC reclaims
the objects.
- max_file_size_mb=1 excludes a 2 MB weights.bin while keeping the
tracked source code files.
- hermes checkpoints {status,prune,clear,clear-legacy} all work from the
CLI without an agent running.
Breaking / migration
--------------------
No in-place data migration — legacy per-directory shadow repos are moved
into legacy-<timestamp>/ on first run. Old /rollback history is still
accessible by inspecting the archive with git; run
'hermes checkpoints clear-legacy' to reclaim the space when ready. Users
relying on /rollback must now set checkpoints.enabled=true (or pass
--checkpoints) explicitly.
On Termux/Android aarch64 (and other platforms without prebuilt wheels
for some optional extras), 'pip install -e .[all]' compiles C/Rust
extensions from source. This can run for several minutes with zero
network activity and — with --quiet — zero stdout. Users report
'hermes update hangs at Updating Python dependencies', Ctrl+C it, then
re-run and see 'up to date' (because git pull already succeeded and the
pip step was still working when they interrupted).
Pip's default output is proportional to actual work (one line per
Collecting / Building wheel for X / Installing), so removing --quiet
costs nothing on fast hardware and prevents the false-hang interrupt
loop on slow hardware.
Reported via Discord on Termux/Android. Supersedes #20466 which
misdiagnosed the hang as PYTHONPATH shadowing (install.sh doesn't run
during 'hermes update', and terminal() doesn't inherit PYTHONPATH).
Add Lightpanda as an optional browser engine for local mode.
Lightpanda is a headless browser built from scratch in Zig -- faster
navigation than Chrome with significantly less memory.
One config line to enable:
browser:
engine: lightpanda
New functions in browser_tool.py:
- _get_browser_engine() -- config/env reader with validation + caching
- _should_inject_engine() -- only inject in local non-cloud mode
- _needs_lightpanda_fallback() -- detect empty/failed LP results
- _chrome_fallback_screenshot() -- temporary Chrome session for screenshots
- Engine injection in _run_browser_command (--engine flag)
- browser_vision pre-routes screenshots to Chrome when engine=lightpanda
Config:
- browser.engine in DEFAULT_CONFIG (auto/lightpanda/chrome)
- AGENT_BROWSER_ENGINE in OPTIONAL_ENV_VARS
- /browser status shows engine info in local mode
Rebased from PR #7144 onto current main. All existing code preserved --
pure additions only (+520/-2).
25 new tests + 81 total browser tests pass (0 failures).
Endpoint validated over 6 conversational turns with tool calls (9 API
calls, 3 tool calls, 0 failures) and an 8-request burst (8/8 ok,
0 rate limits). Latency ~5-10s/call — slower than grok-4.20 but
expected for a reasoning model.
- hermes_cli/models.py: add to OPENROUTER_MODELS and _PROVIDER_MODELS['nous']
- website/static/api/model-catalog.json: regenerated
Endpoint re-tested over 6 conversational turns (9 API calls, 3 tool calls)
and an 8-request burst — no rate limits, no errors, ~2-3s latency. The
historical rate-limit issues that caused its removal are gone.
- hermes_cli/models.py: add to OPENROUTER_MODELS and _PROVIDER_MODELS['nous']
- website/static/api/model-catalog.json: regenerated via build_model_catalog.py
- hermes_cli/config.py: add tr to supported languages comment
- locales/en.yaml: add tr to locale file list comment
- tests/agent/test_i18n.py: add Turkish alias tests + explicit lang test
- website/docs/user-guide/configuration.md: add tr to supported values
The kanban-worker skill (built into the gateway dispatcher's spawn
prompt) instructs every worker to hand off via
``kanban_complete(summary=..., metadata=...)``. That writes the summary
onto the closing ``task_runs`` row, NOT onto ``tasks.result`` — the
latter is left NULL unless the caller passes ``result=`` explicitly.
Result: a glance at the dashboard or ``hermes kanban show <id>`` shows
a blank "Result:" section even when the worker did real work, which
on 2026-05-05 caused a Mac false-alarm ("Hermes did nothing") on a
task that had a 10-line completion summary on its run.
This patch surfaces the latest non-null run summary as
``latest_summary`` so the worker's actual handoff lands in front of
operators.
* New helpers ``kanban_db.latest_summary(conn, task_id)`` and
``kanban_db.latest_summaries(conn, task_ids)``. The batch variant
uses a single window-function SELECT so the dashboard board endpoint
doesn't pay an N+1 cost on multi-hundred-task boards.
* CLI ``hermes kanban show <id>`` prints a "Latest summary:" block
when ``tasks.result`` is empty but a run has produced a summary
(the existing "Result:" section still wins when populated, so the
back-compat path for hand-edited results is untouched). JSON output
gains a top-level ``latest_summary`` field.
* Dashboard ``/board`` and ``/tasks/{id}`` now include a
``latest_summary`` field on every task. Cards on /board carry a
200-character preview (cheap to render, plenty for "what did this
worker do?" at a glance); the drawer/detail endpoint returns the
full summary.
* Five new tests cover: empty-runs case, post-complete surface,
newest-of-multiple selection, empty-string skip, batch with
missing tasks + empty input.
Smoke-tested locally against the live profile DB on the three
acceptance-criterion targets (t_f08fef91 cron-hygiene-audit,
t_007b7f1c EMA-analysis, t_05746fa4 self-assessment) — all three now
return their populated summaries via both ``latest_summary`` and
``latest_summaries``.
Test plan: 255/255 kanban tests pass + 91/91 dashboard plugin tests
pass. No regression on tasks where ``tasks.result`` is explicitly
populated (the existing "Result:" branch is preserved).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Widens _verify_created_cards to also accept ids that are children of the
completing task in task_links. Previously we only accepted cards where
created_by matched the completing task's assignee, which was too strict
for legitimate orchestrator flows: a specifier creates a card (so
created_by=specifier, not worker), then a worker picks it up and passes
parents=[current_task] to kanban_create. The explicit link proves the
relationship and should be trusted.
Salvaged from #20022 @LeonSGP43 (full PR superseded by #20232 +
this patch; the linked-children relaxation was the portable
improvement).
The dispatcher's circuit breaker only protected against spawn-side
failures (profile missing, workspace mount error, exec failure).
Workers that successfully spawned but then timed out or crashed
re-queued to ``ready`` with no counter increment, so the next tick
re-spawned them — loops forever until someone noticed. Reported
externally on Twitter (Forbidden Seeds) and confirmed by walking the
kernel: ``enforce_max_runtime`` flipped the task back to ready, emitted
a ``timed_out`` event, and never touched ``spawn_failures``; same for
``detect_crashed_workers``.
Fix: unify the counter across all non-success outcomes.
Schema
------
* ``tasks.spawn_failures`` → ``tasks.consecutive_failures``
* ``tasks.last_spawn_error`` → ``tasks.last_failure_error``
* Migration renames the columns in-place on existing DBs (``ALTER
TABLE RENAME COLUMN`` — SQLite >= 3.25) so historical counter
values are preserved. Row mappers fall through to the legacy names
if both column renames and a migration somehow got out of sync.
Counter lifecycle
-----------------
New helper ``_record_task_failure(conn, task_id, error, *, outcome,
release_claim, end_run, event_payload_extra)`` is the single point
every non-success outcome funnels through:
* ``spawn_failed`` → ``_record_spawn_failure`` (kept as alias)
calls it with ``release_claim=True, end_run=True`` — transitions
running→ready, clears claim, closes run.
* ``timed_out`` → ``enforce_max_runtime`` already does the status
transition + run close + event emission, then calls
``_record_task_failure`` with ``release_claim=False, end_run=False``
just to bump the counter (and trip the breaker if needed).
* ``crashed`` → ``detect_crashed_workers`` same pattern, but the
counter increment runs after the main write_txn closes (SQLite
doesn't nest write transactions).
If the counter hits the breaker threshold (``DEFAULT_FAILURE_LIMIT=5``,
same as before), the task transitions to ``blocked`` with a ``gave_up``
event on top of whatever outcome-specific event was already emitted.
Reset semantics changed: the counter now clears only on successful
``complete_task`` (and operator ``reclaim_task`` — an explicit "I've
looked at this, try again with a fresh budget"). Previously
``_clear_spawn_failures`` ran on every successful spawn, which would
have wiped the counter before a timeout could accumulate past threshold
— exactly the loop this fix prevents.
Diagnostics
-----------
* ``_rule_repeated_spawn_failures`` → ``_rule_repeated_failures``. Now
fires regardless of which outcome is at fault. Classifies the most
recent failure (spawn_failed / timed_out / crashed) from the run
history so the title ("Agent timeout x3", "Agent crash x4", "Agent
spawn x5") and suggested action (``doctor`` for spawn, ``log`` for
timeout/crash) stay outcome-specific without N duplicate rules.
* ``_rule_repeated_crashes`` kept as a narrower early-warning at
threshold 2 (vs 3 for the unified rule), but now suppresses itself
when the unified rule would also fire — avoids double-flagging.
* Diagnostic ``data`` payload now carries
``{consecutive_failures, most_recent_outcome, last_error}`` instead
of spawn-specific keys.
CLI
---
* ``Task.consecutive_failures`` / ``Task.last_failure_error`` are the
public fields now. Existing callers that referenced the old names
get migrated (tests updated in this commit).
* Backward-compat: ``DEFAULT_SPAWN_FAILURE_LIMIT``,
``_clear_spawn_failures``, ``_record_spawn_failure`` stay as aliases.
Tests
-----
* 6 new kernel tests: timeout increments counter, 3 consecutive
timeouts trip the breaker (was the reported gap), crash increments
counter, reclaim clears counter, completion clears counter, spawn
success does NOT clear counter.
* Diagnostic tests: updated ``repeated_spawn_failures`` cases to use
the new kind name and add a timeout-loop test.
* Dashboard API test: spawn_failures column update → consecutive_failures.
389/389 kanban-suite tests pass.
Live verification
-----------------
Seeded 4 tasks in an isolated HERMES_HOME: 3 timeouts, 4 crashes,
2-spawn-failed + 2-timed-out, and a task that had prior failures but
completed successfully. Board correctly shows "!! 3 tasks need
attention" (the successful one has no badge because the counter
reset). Drawer for the timeout-loop task renders "Agent timeout x3"
with most_recent_outcome=timed_out and the "Check logs" suggested
action (not the spawn-flavoured "Verify profile"). The successful
task has zero diagnostics.
Closes the Forbidden-Seeds-reported gap.
AGENTS.md is the AI-assistant entry doc, so its counts get used as ground
truth. Several values had drifted, and the same drift had spread to a few
user-facing surfaces. Fixing all of them in one commit so the count claims
agree and clearly distinguish gateway-core from plugin-shipped platforms.
AGENTS.md:
- run_agent.py "~12k LOC" → "~14k LOC as of 2026-05-03" (actual 14,097)
- cli.py "~11k LOC" → "~12k LOC as of 2026-05-03" (actual 12,043)
- tools/environments/ list now lists all 7 user-selectable terminal backends
in canonical order, matching tools/terminal_tool.py:2214-2215
- gateway/platforms/ list adds yuanbao and wecom_callback; the 19 names
match the user-facing list at website/docs/integrations/index.md
- plugins/ tree now mentions plugins/platforms/ (irc, teams)
- tests/ snapshot "~15k tests across ~700 files as of Apr 2026" →
"~19k tests across ~890 files as of 2026-05-03"
User-facing count claims:
- hermes_cli/tips.py:195 — "19 platforms" → "21 messaging platforms" with
IRC and Microsoft Teams added to the named list
- website/docs/index.md:49 — "6 terminal backends" → "7 terminal backends:
..., Vercel Sandbox" (also corrected by PR #19044; same edit content)
- website/docs/index.md:50 — "15+ platforms from one gateway" → "21+ messaging
platforms (19 in the gateway, plus IRC and Microsoft Teams via plugins)"
- website/docs/integrations/index.md:83-85 — "15+ messaging platforms" → "19+",
added yuanbao to the linked list. The surrounding text scopes it to "configured
through the same gateway subsystem", so plugin platforms (IRC, Teams) are
intentionally not in this list
- website/scripts/generate-llms-txt.py:205 — "15+ platforms" → "21+ messaging
platforms — 19 native to the gateway plus IRC and Microsoft Teams via plugins"
LOC and date stamps follow the existing AGENTS.md "as of <date>" convention
(line 56 already used this pattern). Source of truth for the gateway count is
gateway/config.py:130-148 (PlatformID enum); plugin platforms live in
plugins/platforms/.
Out of scope:
- RELEASE_v0.9.0.md historical "16 platforms" claim (immutable history)
- userStories.json verbatim user quotes
- Programmatic count generation from gateway/config.py + plugin manifests
is a worthwhile build-system change but separate from these content fixes
* fix(tui): close slash parity gaps with CLI
Route unsupported /skills subcommands through slash.exec, support /new <name>
titles, and handle /redraw natively so TUI behavior matches classic CLI. Also
filter gateway-only commands out of the TUI catalog while keeping /status
discoverable.
* fix(tui): run remaining CLI parity paths natively
Forward chat launch flags into the TUI runtime and handle live-session status
and skill reloads in the gateway process so TUI state no longer depends on the
slash worker's stale CLI instance.
* fix(tui): block stale snapshot restores
Prevent snapshot restore from running through the isolated slash worker because
it mutates disk state without refreshing the live TUI agent.
* chore: uptick
* fix(tui): guard async session title updates
Handle failures from the fire-and-forget session.title RPC so title-setting errors do not surface as unhandled promise rejections while preserving session-scoped messaging.
Every provider profile is now a self-contained plugin under
plugins/model-providers/<name>/, mirroring the plugins/platforms/
pattern established for IRC and Teams. The ProviderProfile ABC
stays in providers/; the per-provider profile data moves out.
- plugins/model-providers/<name>/__init__.py calls register_provider()
- plugins/model-providers/<name>/plugin.yaml declares kind: model-provider
- providers/__init__.py._discover_providers() lazily scans bundled plugins
then $HERMES_HOME/plugins/model-providers/<name>/ (user override path)
- User plugins with the same name override bundled ones (last-writer-wins
in register_provider)
- Legacy providers/<name>.py layout still supported for back-compat with
out-of-tree editable installs
- Hermes PluginManager: new kind=model-provider; skipped like memory
plugins (providers/ discovery owns them); standalone plugins with
register_provider+ProviderProfile in their __init__.py auto-coerce to
this kind (same heuristic as memory providers)
- skip_names extended to include 'model-providers' so the general
PluginManager doesn't double-scan the category
- 4 new tests in tests/providers/test_plugin_discovery.py covering
bundled discovery, user override, and general-loader isolation
- Docs updated: website/docs/developer-guide/adding-providers.md,
provider-runtime.md, providers/README.md, plugins/model-providers/README.md
No API break: auth.py / config.py / doctor.py / models.py / runtime_provider.py /
model_metadata.py / auxiliary_client.py / chat_completions.py / run_agent.py
all still consume providers via get_provider_profile() / list_providers() —
they just now see plugin-discovered entries instead of pkgutil-iterated ones.
Third parties can now drop a single directory into
~/.hermes/plugins/model-providers/<name>/ to add or override an inference
provider without touching the repo.
Introduces providers/ package — single source of truth for every
inference provider. Adding a simple api-key provider now requires one
providers/<name>.py file with zero edits anywhere else.
What this PR ships:
- providers/ package (ProviderProfile ABC + 33 profiles across 4 api_modes)
- ProviderProfile declarative fields: name, api_mode, aliases, display_name,
env_vars, base_url, models_url, auth_type, fallback_models, hostname,
default_headers, fixed_temperature, default_max_tokens, default_aux_model
- 4 overridable hooks: prepare_messages, build_extra_body,
build_api_kwargs_extras, fetch_models
- chat_completions.build_kwargs: profile path via _build_kwargs_from_profile,
legacy flag path retained for lmstudio/tencent-tokenhub (which have
session-aware reasoning probing that doesn't map cleanly to hooks yet)
- run_agent.py: profile path for all registered providers; legacy path
variable scoping fixed (all flags defined before branching)
- Auto-wires: auth.PROVIDER_REGISTRY, models.CANONICAL_PROVIDERS,
doctor health checks, config.OPTIONAL_ENV_VARS, model_metadata._URL_TO_PROVIDER
- GeminiProfile: thinking_config translation (native + openai-compat nested)
- New tests/providers/ (79 tests covering profile declarations, transport
parity, hook overrides, e2e kwargs assembly)
Deltas vs original PR (salvaged onto current main):
- Added profiles: alibaba-coding-plan, azure-foundry, minimax-oauth
(were added to main since original PR)
- Skipped profiles: lmstudio, tencent-tokenhub stay on legacy path (their
reasoning_effort probing has no clean hook equivalent yet)
- Removed lmstudio alias from custom profile (it's a separate provider now)
- Skipped openrouter/custom from PROVIDER_REGISTRY auto-extension
(resolve_provider special-cases them; adding breaks runtime resolution)
- runtime_provider: profile.api_mode only as fallback when URL detection
finds nothing (was breaking minimax /v1 override)
- Preserved main's legacy-path improvements: deepseek reasoning_content
preserve, gemini Gemma skip, OpenRouter response caching, Anthropic 1M
beta recovery, etc.
- Kept agent/copilot_acp_client.py in place (rejected PR's relocation —
main has 7 fixes landed since; relocation would revert them)
- _API_KEY_PROVIDER_AUX_MODELS alias kept for backward compat with existing
test imports
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Closes#14418
* feat(kanban): generic diagnostics engine for task distress signals
Replaces the hallucination-specific ``warnings`` / ``RecoverySection``
surface (shipped in PR #20232) with a reusable diagnostic-rule engine
that covers five distress kinds in v1 and can be extended without
touching UI code. The "something's wrong with this task" signal is
no longer limited to phantom card ids.
Closes the follow-up from #20232 discussion.
New module
----------
``hermes_cli/kanban_diagnostics.py`` — stateless, no-side-effect rule
engine. Each rule is a pure function of
``(task, events, runs, now, config) -> list[Diagnostic]``. Registry
is a simple list; adding a new distress kind is one function + one
import, no UI or API changes required.
v1 rule set
-----------
* ``hallucinated_cards`` (error) — folds the existing
``completion_blocked_hallucination`` event into the new surface.
* ``prose_phantom_refs`` (warning) — folds
``suspected_hallucinated_references``.
* ``repeated_spawn_failures`` (error → critical at 2x threshold) —
fires when ``tasks.spawn_failures >= 3``; suggests
``hermes -p <profile> doctor`` / ``auth``.
* ``repeated_crashes`` (error → critical) — fires after N consecutive
``crashed`` run outcomes with no successful completion between;
suggests ``hermes kanban log <id>``.
* ``stuck_in_blocked`` (warning) — fires after 24h in ``blocked``
state with no comments / unblock attempts; suggests commenting.
Every diagnostic carries structured ``actions`` (reclaim, reassign,
unblock, cli_hint, comment, open_docs) that render consistently in
both CLI and dashboard. Suggested actions are highlighted; generic
recovery actions (reclaim / reassign) are available on every kind as
fallbacks.
Diagnostics auto-clear when the underlying failure resolves — a
clean ``completed``/``edited`` event drops hallucination diagnostics,
a successful run drops crash diagnostics, a comment drops
stuck-blocked diagnostics. Audit events persist; the badge goes away.
API
---
``plugin_api.py``:
* ``/board`` now attaches ``diagnostics`` (full list) and
``warnings`` (compact summary with ``highest_severity``) per task.
* ``/tasks/{id}`` attaches diagnostics so the drawer's Diagnostics
section auto-opens on flagged tasks.
* NEW ``/diagnostics`` endpoint — fleet-wide listing, filterable by
severity, sorted critical-first.
CLI
---
* NEW ``hermes kanban diagnostics [--severity X] [--task id]
[--json]`` — fleet view or single-task view, matches dashboard rule
output so CLI users see the same picture.
* ``hermes kanban show <id>`` now renders a Diagnostics section near
the top with severity markers + suggested actions.
Dashboard
---------
* Card badge is severity-coloured (⚠ amber warning, !! orange error,
!!! red critical) using ``warnings.highest_severity``.
* Attention strip above the toolbar counts EVERY task with active
diagnostics (not just hallucinations), severity-coloured, lists
affected tasks with Open buttons when expanded.
* Drawer's old ``RecoverySection`` replaced with generic
``DiagnosticsSection`` rendering a card per active diagnostic:
title + detail + structured data (task-id chips when payload keys
look like id lists) + action buttons. Reassign profile picker is
inline per-diagnostic. Clipboard fallback uses ``.catch()`` for
environments where writeText rejects.
* Three-rung severity palette; amber for warning, orange for error,
red for critical. Uses CSS variables so theming is straightforward.
Tests
-----
* NEW ``tests/hermes_cli/test_kanban_diagnostics.py`` — 14 unit tests
covering each rule's positive/negative/threshold paths, severity
sorting, broken-rule isolation, and sqlite3.Row integration.
* Dashboard plugin tests extended: ``/diagnostics`` endpoint (empty,
populated, severity-filtered), ``/board`` exposes both diagnostic
list and compact summary with ``highest_severity``.
* Existing hallucination-specific test (``test_board_surfaces_
warnings_field_for_hallucinated_completions``) updated to reflect
the new contract: warning summary keys by diagnostic kind
(``hallucinated_cards``) not event kind.
379 kanban-suite tests pass (+16 net from this PR).
Live verification
-----------------
Seeded all 5 diagnostic kinds + one clean + one plain-running task
(7 total) into an isolated HERMES_HOME, spun up the dashboard, and
verified:
* Attention strip: shows ``!! 5 tasks need attention`` in the
error-severity orange; Show expands to a list of 5 rows ordered
critical > error > warning.
* Card badges: error tasks render ``!!`` orange, warning tasks
render ``⚠`` amber, clean and plain-running tasks render no badge.
* Each of the 5 rules opens a correctly-coloured, correctly-styled
diagnostic card in the drawer with its specific suggested action.
* Live reassign from a diagnostic card flipped
``broken-ml-worker → alice`` and the drawer refreshed with the
new assignee + the same diagnostic still firing (correct:
spawn_failures counter hasn't reset yet).
* CLI ``hermes kanban diagnostics`` prints all 5 in severity order;
``--severity error`` narrows to 3; ``kanban show <id>`` includes
the Diagnostics block at the top with suggested action hint.
Migration note
--------------
The old ``warnings`` shape (``{count, kinds, latest_at}``) is
preserved on the API but ``kinds`` now keys by diagnostic kind
(``hallucinated_cards``) instead of event kind
(``completion_blocked_hallucination``). ``highest_severity`` is a
new required field. The dashboard was the only consumer and has
been updated in the same commit; external API consumers of the
``warnings`` field will need to update their kind-match logic.
* feat(kanban/diagnostics): lead titles with the actual error text
The generic 'Worker crashed N runs in a row' / 'Worker failed to spawn
N times' titles buried the actual cause in the data section. Operators
had to open logs or expand the diagnostic to see WHY the worker is
stuck — rate-limit vs insufficient quota vs bad auth vs context
overflow vs network blip all looked identical at a glance.
New titles:
Agent crashed 3x: openai: 429 Too Many Requests - rate limit reached
Agent crashed 3x: anthropic: 402 insufficient_quota - credit balance
Agent crashed 3x: provider auth error: 401 Unauthorized
Agent spawn failed 4x: insufficient_quota: You exceeded your current
Detail keeps the full error snippet (capped at 500 chars + ellipsis
for tracebacks). Title takes the first line capped at 160 chars.
Fallback title if no error recorded stays honest ('no error recorded').
Tests: 4 new cases covering 429/billing/spawn/truncation. 383 total
pass (+4).
Live-verified on dashboard with 6 seeded scenarios
(rate-limit, billing, auth, context, network, spawn-billing) —
each card title leads with the actionable error text.
The Telegram/Discord /model pickers currently call
list_authenticated_providers(), which returns every provider whose
credentials resolve locally and every model in its curated snapshot.
Two failure modes fall out:
- OpenRouter rows can include IDs the live catalog no longer carries.
- Provider rows can surface with zero callable models (e.g. a slug
whose credential pool entry exists but has nothing behind it).
list_picker_providers() wraps the base function and post-processes the
result so the interactive picker only shows models the user can
actually select:
- OpenRouter's models come from fetch_openrouter_models() (live-catalog
filtered against the curated OPENROUTER_MODELS snapshot).
- Rows with an empty models list are dropped, except custom endpoints
(is_user_defined=True with an api_url) where the user may enter
model ids manually.
- All other fields pass through unchanged.
The gateway /model handler switches to the new helper for the
interactive picker payload only. Typed /model <name> and the text
fallback list stay on list_authenticated_providers() so nothing is
hidden from power users or platforms without a picker.
Covered by nine focused unit tests in
tests/hermes_cli/test_list_picker_providers.py.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Workers completing a kanban task can now claim the ids of cards they
created via an optional ``created_cards`` field on ``kanban_complete``.
The kernel verifies each id exists and was created by the completing
worker's profile; any phantom id blocks the completion with a
``HallucinatedCardsError`` and records a
``completion_blocked_hallucination`` event on the task so the rejected
attempt is auditable. Successful completions also get a non-blocking
prose-scan pass over their ``summary`` + ``result`` that emits a
``suspected_hallucinated_references`` event for any ``t_<hex>``
reference that doesn't resolve.
Closes#20017.
Recovery UX (kernel + CLI + dashboard)
--------------------------------------
A structural gate alone isn't enough — operators also need to see and
act on stuck workers, especially when a profile's model is the root
cause. This PR ships the full loop:
* ``kanban_db.reclaim_task(task_id)`` — operator-driven reclaim that
releases an active worker claim immediately (unlike
``release_stale_claims`` which only acts after claim_expires has
passed). Emits a ``reclaimed`` event with ``manual: True`` payload.
* ``kanban_db.reassign_task(task_id, profile, reclaim_first=...)`` —
switch a task to a different profile, optionally reclaiming a stuck
running worker in the same call.
* ``hermes kanban reclaim <id> [--reason ...]`` and
``hermes kanban reassign <id> <profile> [--reclaim] [--reason ...]``
CLI subcommands wired through to the same helpers.
* ``POST /api/plugins/kanban/tasks/{id}/reclaim`` and
``POST /api/plugins/kanban/tasks/{id}/reassign`` endpoints on the
dashboard plugin.
Dashboard surfacing
-------------------
* ⚠ **warning badge** on cards with active hallucination events.
* **attention strip** at the top of the board listing all flagged
tasks; dismissible per session.
* **events callout** in the task drawer — hallucination events render
with a red left border, amber icon, and phantom ids as styled chips.
* **recovery section** in the task drawer with three actions: Reclaim,
Reassign (with profile picker + reclaim-first checkbox), and a
copy-to-clipboard hint for ``hermes -p <profile> model`` since
profile config lives on disk and can't be edited from the browser.
Auto-opens when the task has warnings, collapsed otherwise.
Keyed by task id so state doesn't leak between drawers.
Active-vs-stale rule: warnings clear when a clean ``completed`` or
``edited`` event supersedes the hallucination, so recovery is never
permanently stigmatising — the audit events persist for debugging but
the badge goes away once the worker succeeds.
Skill updates
-------------
* ``skills/devops/kanban-worker/SKILL.md`` documents the
``created_cards`` contract with good/bad examples.
* ``skills/devops/kanban-orchestrator/SKILL.md`` gains a "Recovering
stuck workers" section with the three actions and when to use each.
Tests
-----
* Kernel gate: verified-cards manifest, phantom rejection + audit
event, cross-worker rejection, prose scan positive + negative.
* Recovery helpers: reclaim on running task, reclaim on non-running
returns False, reassign refuses running without reclaim_first,
reassign with reclaim_first succeeds on running.
* API endpoints: warnings field present on /board and /tasks/:id,
warnings cleared after clean completion, reclaim 200 + 409 paths,
reassign 200 + 409 + reclaim_first paths.
* CLI smoke: reclaim + reassign subcommands.
Live-verified end-to-end on a dashboard with seeded scenarios:
attention strip renders, badges land on the right cards, drawer
callout shows phantom chips, Reclaim on a running task flips status to
ready + emits manual reclaimed event + refreshes the drawer,
Reassign swaps the assignee and triggers board refresh.
359/359 kanban-suite tests pass
(test_kanban_{db,cli,boards,core_functionality} + dashboard + tools).
* revert(gateway): remove stale-code self-check and auto-restart
Removes the _detect_stale_code / _trigger_stale_code_restart mechanism
introduced in #17648 and iterated in #19740. On every incoming message
the gateway compared the boot-time git HEAD SHA to the current SHA on
disk, and if they differed it would reply with
Gateway code was updated in the background --
restarting this gateway so your next message runs
on the new code. Please retry in a moment.
and then kick off a graceful restart. This is unwanted behaviour:
users who run a long-lived gateway and do their own ad-hoc git
operations on the checkout end up with their chat interrupted and
the current message dropped every time HEAD moves, with no way to
opt out.
If an operator really needs the old protection against stale
sys.modules after "hermes update", the SIGKILL-survivor sweep in
hermes update (hermes_cli/main.py, also tagged #17648) already
handles the supervisor-respawn case on its own.
Removed:
gateway/run.py:
- _STALE_CODE_SENTINELS, _GIT_SHA_CACHE_TTL_SECS
- _read_git_head_sha(), _compute_repo_mtime() module helpers
- class-level _boot_wall_time / _boot_repo_mtime / _boot_git_sha /
_stale_code_restart_triggered defaults
- __init__ boot-snapshot block (_boot_*, _cached_current_sha*,
_repo_root_for_staleness, _stale_code_notified)
- _current_git_sha_cached(), _detect_stale_code(),
_trigger_stale_code_restart() methods
- stale-code check + user-facing restart notice at the top of
_handle_message()
tests/gateway/test_stale_code_self_check.py (deleted, 412 lines)
No new logic added. Zero remaining references to any removed
symbol. Gateway test suite passes the same 4589 tests it passed
before; the 3 pre-existing unrelated failures (discord free-channel,
feishu bot admission, teams typing) are unchanged by this commit.
* feat(i18n): add display.language for static message translation (zh/ja/de/es)
Adds a thin-slice i18n layer covering the highest-impact static user-facing
messages: the CLI dangerous-command approval prompt and a handful of gateway
slash-command replies (restart-drain, goal cleared, approval expired, config
read/save errors).
Out of scope (stays English): agent responses, log lines, tool outputs,
slash-command descriptions, error tracebacks.
Infrastructure:
- agent/i18n.py: catalog loader, t() helper, language resolution
(HERMES_LANGUAGE env var > display.language config > en)
- locales/{en,zh,ja,de,es}.yaml: ~19 translated strings per language
- display.language in DEFAULT_CONFIG (hermes_cli/config.py)
Tests:
- tests/agent/test_i18n.py: 21 tests covering catalog parity, placeholder
parity across locales, fallback behavior, env-var override, alias
normalization, missing-key graceful degradation.
Docs:
- website/docs/user-guide/configuration.md: display.language entry plus a
short section explaining scope so users don't expect agent responses to
translate via this knob.
Strip bracketed-paste control sequences from setup prompt input so pasted API keys work on Linux and WSL terminals, and add regression tests for normal/password prompts.
Closes#16491
hermes config set model.aliases.xxx commands write to the model.aliases
nested key, but _load_direct_aliases() only read from the top-level
model_aliases key. This meant aliases set via hermes config set were
invisible to the /model command, and unrecognised inputs fell through
to the DeepSeek normaliser which mapped everything to deepseek-chat.
Add a second pass in _load_direct_aliases() that reads model.aliases
and converts string-value entries (provider/model format) into
DirectAlias objects. The provider is parsed from the slash prefix;
if no slash, the current default provider from config is used.
Also prevent simple aliases from overriding explicit model_aliases
dict entries when both exist.
* fix(curator): protect hub skills by frontmatter name
* test(skill_usage): add mark_agent_created to regression test
The cherry-picked test predates #19618/#19621 which rewrote
list_agent_created_skill_names() to require an explicit
created_by: 'agent' provenance marker. Without mark_agent_created(),
my-skill is excluded from the list and the positive assertion fails.
* feat(curator): add archive and prune subcommands
Adds 'hermes curator archive <skill>' and 'hermes curator prune
[--days N] [--yes] [--dry-run]' alongside the existing status, run,
pause, resume, pin, unpin, restore, backup, rollback verbs.
These are the two genuinely new user-facing verbs requested in #19384.
The other verbs proposed there ('stats' and 'restore') already exist
as 'curator status' and 'curator restore', so no duplicate surface is
added — all skill lifecycle commands live under the single 'hermes
curator' namespace.
- archive: manual archive of an agent-created skill. Refuses pinned
skills with a hint pointing at 'hermes curator unpin'.
- prune: bulk-archive unpinned skills idle for >= N days (default 90).
Falls back to created_at when last_activity_at is null so never-used
skills can still be pruned. --dry-run previews, --yes skips prompt.
Adapted from @elmatadorgh's PR #19454 which placed the same verbs
under 'hermes skills' with a separate hermes_cli/skills_config.py
handler and rich table for stats. The 'stats' and 'restore' parts of
that PR duplicated existing surface, so only archive and prune are
kept, rewritten to match hermes_cli/curator.py's existing plain-text
handler style. Tests rewritten from scratch against the new handlers.
Closes#19384
Co-authored-by: elmatadorgh <coktinbaran5@gmail.com>
---------
Co-authored-by: LeonSGP43 <cine.dreamer.one@gmail.com>
Co-authored-by: elmatadorgh <coktinbaran5@gmail.com>
Without an explicit pin, in-process kanban tools and shelled-out
`hermes kanban …` subprocesses resolve the active board on different
paths: the env var when set, otherwise the global `<root>/kanban/current`
file. When a concurrent session toggles the current-board pointer
mid-turn, the same chat ends up routing tool calls to board A while its
shell calls hit board B, surfacing as phantom "no such task" errors.
Pin the resolved board into env once at `cmd_chat` boot when
HERMES_KANBAN_BOARD isn't already set. Mirrors what the dispatcher does
for spawned workers (kanban_db.py:2622-2623). Idempotent and a no-op
when the env is already pinned by the caller.
Closes#20074
After PR #20105 (dispatcher skips ready tasks whose assignee fails
``profile_exists()`` to prevent the orion-cc/orion-research crash
loop), the gateway and CLI emit a spurious "kanban dispatcher stuck:
ready queue non-empty for N consecutive ticks but 0 workers spawned"
warning every 5 minutes on multi-lane setups where the queue is
steadily full of human-pulled work assigned to terminal lanes.
The warn is intended to catch real failure modes (broken PATH,
missing venv, credential loss for a real Hermes profile). On a
multi-lane host it fires forever even though everything is healthy:
the dispatcher correctly chose not to spawn, and there is nothing
for the operator to fix.
Changes:
* ``DispatchResult`` gains a ``skipped_nonspawnable`` field
(separate from ``skipped_unassigned``) so callers can distinguish
"task missing an owner — operator should route it" from "task
owned by a control-plane lane — terminal will pull it".
* ``dispatch_once`` routes the ``not profile_exists(assignee)`` skip
into the new bucket (was lumped into ``skipped_unassigned``).
* New helper ``has_spawnable_ready(conn)`` returns True iff at least
one ready+assigned+unclaimed task in the DB has an assignee that
maps to a real Hermes profile. Falls back to legacy "any
ready+assigned" when ``profile_exists`` is unimportable so degraded
installs still surface the original warn.
* The gateway dispatcher (``gateway/run.py``) and the CLI standalone
daemon (``hermes_cli/kanban.py``) both swap their cheap
``ready_nonempty`` probe to use ``has_spawnable_ready``. Stuck-warn
now fires only when there is genuine spawnable work the dispatcher
failed to start.
* CLI dispatch output prints ``Skipped (non-spawnable assignee —
terminal lane, OK)`` for visibility without alarm.
Tests:
* New ``has_spawnable_ready`` cases (empty queue, terminal-lane
only, mixed real+terminal).
* New ``test_dispatch_skips_nonspawnable_into_separate_bucket``
verifies the bucketing change.
* Updated ``test_dispatch_skips_unassigned`` to assert no
cross-leak.
* Added ``all_assignees_spawnable`` fixture in
``tests/hermes_cli/conftest.py`` and threaded it through dispatcher
tests that use synthetic assignees ("alice", "bob"). PR #20105
(the parent commit) silently broke 8 such tests by routing those
assignees into ``skipped_nonspawnable`` instead of spawning; this
PR repairs them as part of the same code area.
Verified locally: 246/246 kanban-suite tests pass.
Stacks on top of fix/kanban-dispatcher-skip-missing-profile-2026-05-05
(PR #20105). Reviewer: this PR is meant to merge AFTER #20105.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
