Follow-up to #28455. The respawn guard's blocker_auth rule (last error
matched a quota/auth/429 pattern) was auto-blocking the task on first
occurrence. That's too aggressive: transient rate limits typically
clear in seconds to minutes, but the auto-block puts the task in
'blocked' status which requires manual unblock.
Now treats blocker_auth the same as recent_success and active_pr:
defer the spawn this tick, leave the task in 'ready', let the next
tick try again. If the auth error genuinely persists, the existing
consecutive_failures counter trips the auto-block circuit breaker
after failure_limit failures via the normal path — so a persistent
401/403/quota-exhausted still ends up blocked, just not on first hit.
Also documents the respawn_guarded event in kanban.md's events table
with the three guard reasons.
Updated test_dispatch_respawn_guard_auto_blocks_auth_error → renamed
to test_dispatch_respawn_guard_defers_auth_error_without_auto_block;
asserts task stays in 'ready' and the guard reason is recorded.
Follow-up to #28452. detect_stale_running() was calling
_record_task_failure() on every reclaim, which ticked the
consecutive_failures counter. With the default failure_limit=2,
two legitimately long-running tasks (>4 h without explicit
heartbeat) would auto-block via the spawn-failure circuit
breaker — even though no worker actually failed.
Stale reclaim is dispatcher-side absence-of-heartbeat detection,
not a worker fault. Removed the _record_task_failure() call;
the 'stale' event in task_events is still the audit surface,
but the failure counter is now reserved for spawn_failed /
timed_out / crashed (real failures).
Also documents the heartbeat requirement:
- KANBAN_GUIDANCE in agent/prompt_builder.py now states the
rule ('call kanban_heartbeat at least once an hour for tasks
running longer than 1 hour') so workers learn the contract.
- kanban.md adds the stale event row to the events table and
flags the heartbeat requirement in the worker lifecycle list.
New regression test: test_detect_stale_does_not_tick_failure_counter
locks in the new behaviour.
Catch the PR #28452 failure mode (orphan merge-conflict markers in
hermes_cli/config.py) on the user side: after git pull succeeds, compile
the files every 'hermes' invocation imports at startup. If any has a
syntax error, git reset --hard back to the pre-pull SHA so the install
stays bootable. User can retry once a fix lands upstream.
- New _capture_head_sha() + _validate_critical_files_syntax() helpers
- Wires both into _cmd_update_impl after the pull/reset succeeds
- Tests cover the helpers, the rollback flow, and a production-tree
invariant (CI fails if main itself has a syntax error in a critical
file — catches future broken commits before users hit them)
Sweep of all CI failures on origin/main, grouped by drift source:
Telegram allowlist gate (db50af910 added user-authz to _should_process_message):
- Hardcoded "[Telegram]" prefix in the logger.warning so the call no
longer dereferences self.name → self.platform, which test fixtures
built via object.__new__ never set.
- test_telegram_format / test_allowed_channels_widening fixtures stub
_is_callback_user_authorized → True so the new gate doesn't reject
guest-mode / allowed-channels test messages.
- test_telegram_approval_buttons::test_update_prompt_callback_not_affected
sets TELEGRAM_ALLOWED_USERS="*" so the fail-closed default doesn't
reject the callback before it writes .update_response.
Approval surface (6d495d9e7 renamed status, 214b95392 detached stdin):
- test_no_callback_returns_approval_required: status is now
"pending_approval" (was "approval_required").
- test_close_stdin_allows_eof_driven_process_to_finish: switch to
use_pty=True; non-PTY now uses stdin=DEVNULL.
Mattermost (send() now resolves root_id via _api_get first):
- test_send_with_thread_reply mocks _session.get with a thread-root
response so the new resolver doesn't TypeError on a bare AsyncMock.
Kanban (d8ad431de rename, f55d94a1e review column, _kanban_worker_skill_available):
- _safe_int → _to_epoch in the two test_kanban_db tests.
- Spawn-skills tests (×3) monkey-patch _kanban_worker_skill_available
to True since the isolated kanban_home fixture has no devops/kanban-worker tree.
- test_gateway_dispatcher_disables_corrupt_board: connect count
3 → 5 (review-column probe now also runs per tick).
Aux-config severity at_or_above (a94ddd807):
- test_diagnostics_endpoint_severity_filter expects warning filter to
include error+critical now (was exact-match).
Anthropic error handling (conversation loop extracted from run_agent):
- _no_backoff_wait fixture patches BOTH run_agent.jittered_backoff AND
agent.conversation_loop.jittered_backoff. The latter is the actual
call site; without the second patch tests burn ~2s per retry and
hit the 30s SIGALRM timeout on CI.
Other test pollution / drift:
- test_auto_does_not_select_copilot_from_github_token: patch
agent.bedrock_adapter.has_aws_credentials → False so boto3's
credential chain can't auto-pick Bedrock from developer ~/.aws.
- test_setup_openclaw_migration: patch hermes_cli.gateway.get_env_value
in addition to setup_mod.get_env_value — _platform_status reads
through the gateway module's binding.
- test_gateway_prefix: COMPONENT_PREFIXES["gateway"] now includes
"hermes_plugins" too.
- test_recommended_update_command_defaults_to_hermes_update: also
short-circuit get_managed_update_command in case a stray
~/.hermes/.managed marker is present.
- test_user_id_is_not_explicit: _parse_target_ref now returns
is_explicit=False for Slack U.../W... IDs (chat.postMessage rejects
them — a DM must be opened first via conversations.open).
`hermes doctor` printed 'codex CLI not installed (optional — ...)' as a
generic info line at the bottom of the auth section, several rows below
'OpenAI Codex auth (not logged in)' and after MiniMax/Gemini auth checks.
Users reading sequentially mistook it for MiniMax-related advice.
Move the hint up under the Codex auth warning so it's adjacent to the
row it actually pertains to. Behavior unchanged when the codex CLI is
installed (success path keeps its 'codex CLI ✓' row at the bottom).
Tests cover both placement and suppression cases.
Salvage of @xxxigm's 3-commit stack (#27986).
Closes#27975.
HERMES_TUI_RESUME is an internal env var the Python wrapper exports to hand
a session ID off to the Ink TUI. Because _launch_tui started from
os.environ.copy(), any exported/stale value in the user's shell leaked
through — so plain `hermes --tui` would try to resume a missing session
and leave the UI at 'error: session not found' with no live session.
Drop HERMES_TUI_RESUME from the env before conditionally re-setting it
from the argparse-resolved resume_session_id. Tests cover both the drop
path and the set-from-arg path.
Salvage of #28080 by @noctilust.
Salvages #28125 by @Jpalmer95. Adds:
- Drag-to-delete trash zone in the kanban dashboard
- Bulk delete endpoint with cascading delete_task cleanup
- Frontend updates (drag visual + drop handler)
- Confirmation prompt before delete
Resolved end-of-file test conflict by appending both halves.
Salvages #24533 by @roycepersonalassistant. Adds a first-class
'scheduled' Kanban status for time-delay follow-ups that aren't
waiting on human input.
- hermes kanban schedule <task_id> [reason] CLI command
- Dashboard/API transitions to/from Scheduled
- unblock_task() now releases both 'blocked' AND 'scheduled' tasks
(re-checking parent dependencies before moving to ready/todo)
- i18n + docs updates
Resolved conflicts: kept HEAD's failure-counter reset on unblock
alongside the PR's scheduled state, kept HEAD's 'running' direct-set
rejection, combined both bulk-status branches. Dropped the dist/
bundle changes (months-stale; would need rebuild from source).
Skill bundles are tiny YAML files in ~/.hermes/skill-bundles/ that
group several skills under one slash command. Invoking /<bundle-name>
from any surface (CLI, TUI, dashboard, any gateway platform) loads
every referenced skill into a single combined user message.
Use cases:
- /backend-dev → loads github-code-review + test-driven-development
+ github-pr-workflow as one bundle.
- /research → loads several research skills together.
- Team task profiles shared via dotfiles.
Behavior:
- Bundles take precedence over individual skills when slugs collide.
- Missing skills are skipped with a note, not fatal.
- No system-prompt mutation — bundles generate a fresh user message
at invocation time, the same way /<skill> does. Prompt cache stays
intact.
- Works in CLI dispatch, gateway dispatch, autocomplete (CLI + TUI),
/help display.
Schema (~/.hermes/skill-bundles/<slug>.yaml):
name: backend-dev
description: Backend feature work.
skills:
- github-code-review
- test-driven-development
instruction: |
Optional extra guidance prepended to the loaded skills.
New module: agent/skill_bundles.py — load, scan, resolve, build
invocation message, save, delete. yaml.safe_load only; broken
bundles log a warning and are skipped, never raise.
New CLI subcommand: hermes bundles {list,show,create,delete,reload}.
Implementation in hermes_cli/bundles.py; wired in hermes_cli/main.py.
'bundles' added to _BUILTIN_SUBCOMMANDS so plugin discovery skips it.
New in-session slash command: /bundles lists installed bundles in
both CLI and gateway. /<bundle-name> dispatch added to CLI (cli.py)
and gateway (gateway/run.py) before the existing /<skill-name> path.
Autocomplete: SlashCommandCompleter gained an optional
skill_bundles_provider parameter that defaults to None — the prompt
shows '▣ <description> (N skills)' for bundles vs '⚡' for skills.
Tests:
- tests/agent/test_skill_bundles.py — 33 tests covering slugify,
scan/cache freshness, resolve (including underscore→hyphen
Telegram alias), build_bundle_invocation_message (loading, missing
skills, user/bundle instruction injection, dedup), save/delete,
reload diff, list sort.
- tests/hermes_cli/test_bundles.py — 8 tests for the CLI
subcommand (create/list/show/delete/reload, --force, missing
bundle errors).
- tests/gateway/test_bundles_command.py — 4 tests for the gateway
handler and bundle resolution priority.
Live E2E: verified subprocess invocations of hermes bundles
{list,create,show,reload,delete} round-trip correctly against an
isolated HERMES_HOME.
Docs:
- website/docs/user-guide/features/skills.md — new 'Skill Bundles'
section with quick example, YAML schema, management commands,
behavior notes.
- website/docs/reference/cli-commands.md — 'hermes bundles' added to
the top-level command table and given its own subcommand section.
Salvages #26496 by @aqilaziz. Adds branch_name column + CLI flag so
tasks with workspace_kind='worktree' can pin a target branch on
create. Schema migration added to _migrate_add_optional_columns.
- Task.branch_name field + DB column + migration
- create_task accepts branch_name kwarg
- hermes kanban create --branch <name> flag
- kanban show output includes 'Branch: <name>' when set
Cherry-picked the substantive commit (a7558cf27); the PR's tip was
an unrelated service-path-dirs commit. Resolved 2 INSERT-column-list
and show-output conflicts alongside main's session_id and
max_runtime_seconds additions; kept all three.
Salvages #27568 by @SerenityTn. Dashboard cron page now lists cron
jobs from all profiles, with profile-aware filter UI and storage
routing. Includes test coverage for cross-profile listing, mutation,
deletion, and validation.
Also fixes orphan conflict markers in config.py left by an earlier
salvage merge (kanban.dispatch_stale_timeout_seconds was double-nested
in HEAD/PR markers from #28452 salvage of #23790).
Salvages #27484 by @fardoche6. Adds a respawn guard that skips worker
spawn for tasks where:
- a recent run already succeeded (recent_success — within guard window)
- the previous run hit a quota/auth error (blocker_auth, also auto-blocks)
- a recent task comment includes a GitHub PR URL (active_pr)
The guard prevents repeat worker storms on the same bug/task. Includes
the contributor's review-findings fixup (regex hardening, observability,
auth coverage).
Resolved a small DispatchResult conflict alongside main's 'stale' field;
kept both. Authorship preserved via rebase merge.
Salvages #26745 by @nehaaprasaad. Exposes filtering for the existing
workflow_template_id and current_step_key columns:
- list_tasks() accepts workflow_template_id and current_step_key kwargs
- 'hermes kanban list' adds matching CLI flags
- dashboard plugin_api also exposes the filters
Resolved a small conflict in list_tasks signature alongside main's
session_id and order_by additions; combined all three into the single
filter list.
Salvages #23790 by @thewillhuang. Adds detect_stale_running() to
the dispatcher cycle. Running tasks that have been started for longer
than dispatch_stale_timeout_seconds (default 14400 = 4h) without a
heartbeat in the last hour are auto-reclaimed to ready.
- New config kanban.dispatch_stale_timeout_seconds (default 14400, 0 disables)
- New 'stale' field on DispatchResult
- detect_stale_running() in kanban_db.py with heartbeat freshness check
- Records outcome='stale' on run close + 'stale' event; ticks failure counter
- Wires config through gateway embedded dispatcher
- Updates _cmd_dispatch verbose/JSON output and daemon logging
Resolved test-file end-of-file conflict by appending both halves.
Salvages #23772 by @thewillhuang. Adds 'review' as a valid kanban task
status and extends dispatch_once to monitor the review column as a
second dispatch source (in addition to the existing ready column).
- Adds 'review' to VALID_STATUSES
- Adds claim_review_task() — atomically transitions review → running
- Adds has_spawnable_review() — health telemetry mirror
- Extends dispatch_once with a review column dispatch loop
- Review agents get 'sdlc-review' skill auto-loaded
Resolved 2 conflicts (VALID_STATUSES merge with main's 'scheduled' state,
test file additions). Adapted claim_review_task to main's
ttl_seconds: Optional[int] = None convention (matches claim_task).
Salvages #23208 by @awizemann. Tracks which chat session created a
kanban task so clients can render a per-session board without falling
back to tenant + time-window heuristics.
- Schema: tasks gains nullable session_id TEXT column with index
(additive migration in _migrate_add_optional_columns).
- ACP: server.py exposes the originating session id via HERMES_SESSION_ID
with save/restore around the agent loop.
- Tool: kanban_create reads HERMES_SESSION_ID (with explicit override).
- CLI: 'hermes kanban list --session <id>' filter; JSON output exposes
session_id.
Salvages #26791 by @Niraven. Adds 'hermes kanban swarm' to create a
durable Kanban Swarm v1 graph: a completed root/blackboard card,
parallel worker cards, a verifier gated on all workers, and a
synthesizer gated on the verifier. Stores shared swarm blackboard
updates as structured JSON comments on the root card.
Self-contained: new hermes_cli/kanban_swarm.py module + CLI wiring +
unit tests.
Salvages substantive part of #26490 by @aqilaziz. Detects corrupt board
DBs ("file is not a database" / "database disk image is malformed")
and disables them by fingerprint until they're repaired, instead of
flooding the gateway log with repeated logger.exception tracebacks every
tick.
Cherry-picked the substantive commit (ea5b4ec2a); the tip commit was
an unrelated _is_dir OSError fix for service-path lookup. Dropped a
small test reformat that was bundled in the same commit.
Salvages #25745 by @LizerAIDev. Adds --sort {created,created-desc,
priority,priority-desc,status,assignee,title,updated} to 'hermes kanban
list'. Validated against VALID_SORT_ORDERS map; invalid values raise
ValueError. Default behaviour (priority DESC, created ASC) is unchanged
when --sort is omitted.
Salvages #22981 by @SimbaKingjoe. Adds 'kanban.max_in_progress' config
that caps simultaneously running tasks. When the board already has N
running, dispatcher skips spawning so slow workers (local LLMs,
resource-constrained hosts) don't pile up and time out.
Threads through dispatch_once(max_in_progress=) and gateway dispatcher
config parsing with validation (warns on invalid/below-1 values).
Salvages #26431 by @LeonSGP43. Dashboard plugin_api list_diagnostics
was using exact-match (severity == filter), so '--severity warning'
hid 'error' and 'critical' diagnostics. Adds severity_at_or_above()
helper to kanban_diagnostics and uses it in the dashboard endpoint
(CLI already used SEVERITY_ORDER comparison correctly).
When a systemic failure (provider outage, auth expiry, OOM) crashes
multiple workers simultaneously, detect_crashed_workers increments
each task failure counter independently. The circuit breaker only
trips after N × failure_limit retries across the fleet.
Fingerprint crash errors by normalizing host-specific details (PIDs,
timestamps). When 3+ tasks crash with the same fingerprint in a
single detection cycle, immediately trip the circuit breaker
(failure_limit=1) instead of waiting for repeated failures.
Isolated crashes (unique fingerprints) retain their normal retry
budget. Protocol violations continue to trip immediately.
Includes regression tests for systemic and isolated crash paths.
When a task is manually unblocked (blocked → ready/todo), the
consecutive_failures counter and last_failure_error were left intact.
The next failure would immediately re-trip the circuit breaker because
the counter was still at or above the failure limit.
Reset both fields on unblock so the task gets a fresh retry budget.
Includes a regression test that verifies counters are zeroed.
recompute_ready only scanned 'todo' tasks for promotion, ignoring
'blocked' tasks entirely. When a task was blocked (e.g. by the circuit
breaker) and its parent dependencies later completed, the task stayed
stuck in 'blocked' forever unless manually unblocked.
Now recompute_ready also scans 'blocked' tasks. When all parents are
done/archived, the blocked task is promoted to 'ready' with failure
counters reset — equivalent to an automatic unblock.
Includes a regression test for the blocked-parent-done promotion path.
Archiving or deleting a board via remove_board() leaves the path's
"schema already initialized" entry in the module-level cache. A
concurrent connect(board=<slug>) call (e.g. the dashboard event-stream
poll loop) then:
1. resolves the same kanban.db path,
2. recreates the directory + an empty sqlite file because
connect() does mkdir(parents=True, exist_ok=True),
3. skips the CREATE TABLE pass because the cache entry says the
schema is already in place,
4. errors on the next read with `no such table: task_events`.
Drop the cache entry before mutating the filesystem so the fresh file
gets a proper schema init on next connect(). Applies to both
archive=True (rename) and archive=False (rmtree) branches.
Fixes#23833.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Tests (``tests/hermes_cli/test_auth_manual_paste.py``):
* 9 parametrised + scalar cases for ``_is_remote_session`` covering
the new Cloud Shell / Codespaces / Gitpod / Replit / StackBlitz
env vars (plus the existing SSH ones).
* 9 cases for ``_parse_pasted_callback`` covering every paste form
(full URL, https URL with extra params, bare ``?code=...``, bare
``code=...`` fragment, bare opaque value, error+description,
empty, whitespace-only, malformed URL).
* 3 cases for ``_prompt_manual_callback_paste`` (happy path, EOF,
Ctrl-C).
* 3 end-to-end ``_xai_oauth_loopback_login(manual_paste=True)``
cases: the HTTP server MUST NOT be started (asserted via a
callable that raises if invoked), wrong state still rejected
with ``xai_state_mismatch`` (no CSRF bypass), and empty paste
surfaces ``xai_code_missing``.
* SSH-hint mention test ensures the ``--manual-paste`` instruction
is printed in the remote-session hint.
Docs:
* ``oauth-over-ssh.md`` — new "Browser-only remote (Cloud Shell /
Codespaces / EC2 Instance Connect)" section with the
``--manual-paste`` recipe, plus a TL;DR note for the new flag.
* ``xai-grok-oauth.md`` — short subsection pointing at the same
recipe and the OAuth-over-SSH guide anchor.
Salvages #19964 by @Beandon13. Adds `hermes kanban archive --rm` to
permanently remove already-archived tasks with cascading cleanup of
links, comments, events, runs, and notify-subs. Safety guard: only
archived tasks can be deleted; active/blocked/done must be archived
first.
Cherry-picked from #19964 onto current main (severe stale base, applied
manually to preserve substance only).
Tests:
* ``test_refresh_xai_oauth_pure_403_marked_tier_denied_not_relogin`` —
refresh-403 raises ``xai_oauth_tier_denied`` with
``relogin_required=False`` and the API-key fallback hint in body.
* ``test_format_auth_error_tier_denied_does_not_suggest_relogin`` —
the renderer does not append "Run ``hermes model``" for the new
code.
* ``test_recover_with_credential_pool_skips_refresh_on_bare_403_for_xai_oauth`` —
bare ``{"reason":"forbidden","message":"Forbidden"}`` body (which
does not match the existing keyword heuristic) still short-circuits
``try_refresh_current`` on xai-oauth.
Docs:
* Drop the "(any active tier)" claim from the xai-grok-oauth guide,
add a top-of-page warning callout, and a Troubleshooting section
for the 403-after-login case pointing at ``XAI_API_KEY`` +
``provider: xai`` as the documented fallback.
resolve_xai_oauth_runtime_credentials() called _refresh_xai_oauth_tokens()
with no try/except. A terminal refresh failure (HTTP 400/401/403 —
invalid_grant, token revoked) propagated without clearing the dead
access_token / refresh_token from auth.json, causing every subsequent
session to retry the same doomed network request.
Add a try/except around the refresh call that mirrors the existing
credential_pool.py quarantine: when _is_terminal_xai_oauth_refresh_error
identifies a non-retryable failure, clear the dead token fields from
auth.json and write a last_auth_error diagnostic marker so future calls
fail fast with a clear relogin_required error instead of hitting the
network.
active_provider is preserved (set_active=False) so multi-provider users
whose chosen provider is not xai-oauth are unaffected.
Tests: two new cases in test_auth_xai_oauth_provider.py cover terminal
quarantine and transient pass-through.
* feat: add /update slash command to CLI and TUI
* test(cli): add Python tests for /update slash command
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): address Copilot review for /update slash command
Route classic CLI /update through prompt_toolkit modal confirmation and
defer relaunch to the main-thread cleanup path after app.exit(). Tighten
Y/n semantics, add Python wrapper and catalog coverage tests, and assert
/update stays visible in the TUI command catalog.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(cli): address review feedback on /update command
- Replace raw input() with _prompt_text_input_modal in _handle_update_command
to avoid EOF/hang/keystroke-leak races with prompt_toolkit's stdin ownership
- Fix confirmation logic: only proceed on recognized affirmative aliases
(y/yes/1/ok); cancel on everything else including empty string, typos,
and unrecognized input — matches all other [Y/n] prompts in the codebase
- Route relaunch through main-thread shutdown path: set _pending_relaunch
and return False from process_command so process_loop triggers app.exit();
run() then calls relaunch() after prompt_toolkit has restored terminal modes
and after cleanup — safe on both POSIX (execvp) and Windows (subprocess+exit)
- Fix misleading docstring in test_update_command.py: the Vitest only covers
the TypeScript slash handler that emits code 42, not the Python wrapper
branch that acts on it
- Rewrite tests to use SimpleNamespace pattern (like test_destructive_slash_confirm)
so _prompt_text_input_modal can be stubbed directly
- Add Python test for _launch_tui exit-code-42 → relaunch branch in main.py
Agent-Logs-Url: https://github.com/NousResearch/hermes-agent/sessions/f6da68cf-e7b1-4b7a-aed6-3d4b0f523bdb
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
* fix(cli): polish test fixtures for /update command
- Remove unused _prompt_text_input from SimpleNamespace stub
- Use pytest.fail sentinel in managed-install guard test to catch unexpected modal invocations
Agent-Logs-Url: https://github.com/NousResearch/hermes-agent/sessions/f6da68cf-e7b1-4b7a-aed6-3d4b0f523bdb
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
* chore: re-trigger CI after Copilot review fixes
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: austinpickett <260188+austinpickett@users.noreply.github.com>
