mirror of
https://github.com/NousResearch/hermes-agent.git
synced 2026-05-29 06:31:32 +00:00
4f416fc40c
Resolves the explicit "Known follow-up" left by commit2f8ceeab9and the resulting CI failures in tests/docker/test_dashboard.py and tests/docker/test_s6_profile_gateway_integration.py. The product gap --------------- Every hermes runtime operation inside the container runs as the hermes user (UID 10000) via s6-setuidgid. But s6-supervise — spawned by s6-svscan running as PID 1 — creates each service's supervise/ and top-level event/ directories with mode 0700 owned by its effective UID (root). That left every s6-svc / s6-svstat / s6-svwait call from hermes hitting EACCES on the supervise/control FIFO and supervise/status — i.e. the entire S6ServiceManager lifecycle (register, start, stop, unregister) was inert in production. The2f8ceeab9commit message called this out and deferred the fix. The audit changes that landed alongside it (defaulting docker_exec to -u hermes) made the integration tests reproduce the bug deterministically; the fix below resolves it. The fix: pre-create the supervise/ skeleton hermes-owned ---------------------------------------------------------- Reading s6's source (src/supervision/s6-supervise.c::trymkdir + control_init), the mkdir and mkfifo calls that build the supervise tree are EEXIST-safe: if the directory or FIFO is already present, s6-supervise reuses it and skips the chown/chmod fix-up that would normally make event/ 03730 root:root. So if we lay the skeleton down with hermes ownership before triggering s6-svscanctl -a, s6-supervise inherits our layout and never touches it. The death_tally / lock / status regular files written later by s6-supervise (still as root) land mode 0644 — world-readable — which is all s6-svstat needs. New module-level helper _seed_supervise_skeleton(svc_dir) in hermes_cli/service_manager.py lays down: svc_dir/event/ hermes:hermes 03730 svc_dir/supervise/ hermes:hermes 0755 svc_dir/supervise/event/ hermes:hermes 03730 svc_dir/supervise/control hermes:hermes 0660 (FIFO) svc_dir/log/event/ hermes:hermes 03730 (if log/ present) svc_dir/log/supervise/ hermes:hermes 0755 svc_dir/log/supervise/event/ hermes:hermes 03730 svc_dir/log/supervise/control hermes:hermes 0660 (FIFO) The log/ branch matters because the logger is a second s6-supervise instance — without it, unregister rmtree races on the logger's root-owned supervise dir even after the parent slot's supervise/ is hermes-owned. The helper is idempotent and swallows PermissionError on chown so it works equally well when called from root (cont-init.d) or hermes (runtime register). Wiring ------ 1. S6ServiceManager.register_profile_gateway calls _seed_supervise_skeleton(tmp_dir) just before publishing the slot via Path.replace. Runtime-registered profile gateways are set up by hermes. 2. container_boot._register_service does the same in the cont-init.d reconciliation path so boot-time-restored profile slots inherit the same layout. 3. New cont-init.d/015-supervise-perms script chowns the supervise/ and event/ trees for STATIC s6-rc services (dashboard, main-hermes). These are spawned by s6-rc before cont-init.d gets to run, so the EEXIST-trick doesn't apply; we chown the already-existing tree instead. s6-supervise keeps using the same files; it never re-asserts ownership on a running service. The script skips s6-overlay internal services (s6rc-*, s6-linux-*) so the supervision tree itself stays root-only. 015- slot is intentional: lex-sorts between 01-hermes-setup and 02-reconcile-profiles in the container's C-locale, so the chown finishes before the reconciler walks the scandir. Unregister teardown reordering ------------------------------ S6ServiceManager.unregister_profile_gateway now fires s6-svscanctl -an BEFORE rmtree (with a 200ms grace), so s6-svscan reaps the supervise child and releases its file handles on supervise/lock + supervise/status before we try to remove the directory. Previously rmtree raced s6-supervise on a set of files inside the supervise dir, and even with the parent supervise/ now hermes-owned, the contained files (death_tally, lock, status, written by root) could still be in use. Dashboard down-state redesign ----------------------------- The original PR #30136 review fix wrote a 'down' marker file into /run/service/dashboard/ via cont-init.d/03-dashboard-toggle. That approach was broken in two ways: (a) /run/service/dashboard is a symlink to a TRANSIENT /run/s6-rc:s6-rc-init:<tmpdir>/ directory while s6-rc is mid-transaction; the touch landed in a soon-to-be-discarded tmp. (b) Even when written to the final /run/s6-rc/servicedirs/ location, the 'down' file is only consulted by s6-supervise at slot startup. s6-rc's user-bundle explicitly transitions 'dashboard' to 'up' on every boot, overriding any down marker. The right fix is the canonical s6 pattern: when HERMES_DASHBOARD is unset, the dashboard run script exits 0 and a companion finish script exits 125. Per s6-supervise(8), exit code 125 from the finish script is the 'permanent failure, do not restart' marker — equivalent to s6-svc -O. The slot reports as 'down' to s6-svstat, matching the reality that no dashboard process is running. When HERMES_DASHBOARD IS truthy, finish exits 0 and restart-on-crash semantics apply. 03-dashboard-toggle is removed (its function is now subsumed by the run/finish pair). Tests ----- Adds four unit tests for _seed_supervise_skeleton covering the produced layout, the log/ subservice case, the skip-when-no-log case, and idempotency. The live-container verification continues to live in tests/docker/test_s6_profile_gateway_integration.py and tests/docker/test_dashboard.py — both now pass against the rebuilt image. References ---------- * Skarnet skaware mailing list 2020-02-02 (Laurent Bercot + Guillermo Diaz Hartusch) on unprivileged s6 tool semantics: http://skarnet.org/lists/skaware/1424.html * just-containers/s6-overlay#130 — same EEXIST-preseed pattern, community-validated 2016 onward * https://skarnet.org/software/s6/servicedir.html — exit-code 125 semantics in finish scripts (cherry picked from commitc41f908ad4)
40 lines
1.4 KiB
Text
Executable file
40 lines
1.4 KiB
Text
Executable file
#!/command/with-contenv sh
|
|
# shellcheck shell=sh
|
|
# Dashboard service. Always declared so s6 has a supervised slot; if
|
|
# HERMES_DASHBOARD isn't truthy the run script exits cleanly and the
|
|
# companion finish script returns 125 (s6's "permanent failure, do
|
|
# not restart" marker), so s6-svstat reports the slot as down. See
|
|
# also docker/s6-rc.d/dashboard/finish.
|
|
|
|
case "${HERMES_DASHBOARD:-}" in
|
|
1|true|TRUE|True|yes|YES|Yes) ;;
|
|
*)
|
|
# Exit 0; the finish script will exit 125 → s6-supervise won't
|
|
# restart us and the slot reports down. Using a clean exit
|
|
# (rather than `exec sleep infinity`) means s6-svstat reflects
|
|
# reality: when HERMES_DASHBOARD is unset, the service is NOT
|
|
# running, just supervised-with-permanent-failure. See PR
|
|
# #30136 review item I3.
|
|
exit 0
|
|
;;
|
|
esac
|
|
|
|
cd /opt/data
|
|
# shellcheck disable=SC1091
|
|
. /opt/hermes/.venv/bin/activate
|
|
|
|
dash_host="${HERMES_DASHBOARD_HOST:-0.0.0.0}"
|
|
dash_port="${HERMES_DASHBOARD_PORT:-9119}"
|
|
|
|
# Binding to anything other than localhost requires --insecure — the
|
|
# dashboard refuses otherwise because it exposes API keys. Inside a
|
|
# container this is the expected deployment.
|
|
insecure=""
|
|
case "$dash_host" in
|
|
127.0.0.1|localhost) ;;
|
|
*) insecure="--insecure" ;;
|
|
esac
|
|
|
|
# shellcheck disable=SC2086 # word-splitting of $insecure is intentional
|
|
exec s6-setuidgid hermes hermes dashboard \
|
|
--host "$dash_host" --port "$dash_port" --no-open $insecure
|