The status-bar zap currently toggles per-session approval bypass (the same
scope as the TUI's Shift+Tab). This adds a global escape hatch: Shift+clicking
the zap flips the persistent approvals.mode in config.yaml between "off"
(bypass on) and "manual" (bypass off), affecting every session, the CLI, the
TUI, and cron — and it survives restarts.
- statusbar-controls: thread the click's shiftKey through onSelect via a new
StatusbarSelectModifiers arg.
- yolo-session: add setGlobalYolo() that calls config.set with scope="global".
- use-statusbar-items: branch toggleYolo on modifiers.shiftKey; plain click
stays per-session, Shift+click goes global.
- tui_gateway config.set "yolo" key: add scope="global" that reads/writes
approvals.mode through the gateway's own (mtime-cached) config view, honors
an explicit value, and re-emits session.info to every live session so each
window's zap reflects the flip immediately.
- i18n: tooltip copy in en/ja/zh/zh-hant notes Shift+click toggles globally.
Tests: two new tui_gateway tests cover the global toggle and explicit-value
paths; existing session/process-scope yolo tests still pass.
After sleep/wake, a remote (global-remote) primary backend can become
unreachable, but it has no child process whose 'exit' clears the main
process's cached connectionPromise. The renderer then re-dials the same
dead remote forever and the composer stays stuck on "Starting Hermes…";
only a quit+reopen recovered.
Fix: the renderer's existing backoff-paced reconnect loop now asks the
main process to revalidate the cached connection before re-dialing. The
main process liveness-probes the cached REMOTE backend's public
/api/status and, if unreachable, drops the cache (resetHermesConnection
only nulls connectionPromise for a remote — no child to SIGTERM) so the
next getConnection() rebuilds a reachable descriptor. Local backends are
never touched here; they self-heal via the child 'exit' handler. The
renderer's loop already provides retry pacing and rides out transient
blips, so no streak/episode bookkeeping is needed in the main process.
The boot hook dismisses the boot-progress overlay on the post-rebuild
'open' so an in-place rebuild can't leave it stuck at ~94%.
Reimplements #40135 by @AlchemistChaos on a smaller, more interpretable
path (63 added lines vs 555): no extracted helper module, no
failure-streak / episode-window state, the renderer's backoff loop is
the retry mechanism. Original diagnosis and fix by @AlchemistChaos.
Co-authored-by: AlchemistChaos <alchemistchaos@protonmail.com>
Desktop connected to a remote gateway can now attach images and PDFs and
display agent-written images. Previously the desktop passed a LOCAL file path
to image.attach; on a remote gateway that path doesn't exist, so the image was
silently dropped ("skipped unreadable path") and the vision model never saw it.
The reverse direction was also broken — images the agent wrote on the gateway
rendered as dead links in the remote client.
Gateway (tui_gateway/server.py):
- image.attach_bytes: base64 byte upload written into the gateway's own images
dir and queued via the existing native-image-attach pipeline. Magic-byte
extension sniffing, data-URL prefix + whitespace tolerance, 25 MB cap,
structured error codes. Accepts content_base64/filename (canonical) and
data/ext (older-desktop aliases).
- pdf.attach: renders each page to PNG via pdftoppm (poppler-utils) at 150 DPI
and queues the pages as images; 50 MB / 25-page caps. Accepts host path or
base64 upload.
- Shared helpers (_decode_attach_base64, _sniff_image_ext, _queue_attached_image)
so the two methods and the existing image.attach don't duplicate logic.
Gateway (hermes_cli/web_server.py):
- GET /api/media: returns a gateway-local image as a base64 data URL so remote
clients can display it. Auth-gated like every /api route, extension
allowlist + size cap, AND confined to the gateway's own media roots
(images/screenshots/cache, resolved symlink-safe) so an authed caller can't
read image-extension files anywhere on disk.
Desktop (apps/desktop):
- syncImageAttachmentsForSubmit uploads bytes via image.attach_bytes when the
connection mode is 'remote'; the local fast path is unchanged.
- media.ts gains isRemoteGateway() + gatewayMediaDataUrl(); directive-text and
markdown-text fetch images over /api/media in remote mode.
Consolidates the competing remote-media PRs (#38876, #40317, #21908, #39437)
into one coherent implementation, taking the strongest parts of each and adding
shared-helper cleanup plus the /api/media root-confinement hardening on top.
The per-profile gateway switching from #38876 is intentionally left out as a
separable feature. TUI file uploads (#40492) remain a separate surface.
Tested: 11 new tui_gateway tests + 5 /api/media endpoint tests + desktop
media.remote unit tests; full tui_gateway + web_server suites green (472
passed); tsc -b clean; E2E verified the full attach→disk→queue and
gateway-path→data-URL display round-trip plus the out-of-root security block.
Co-authored-by: Max Mitcham <maxmitcham@mac.home>
Co-authored-by: Justlrnal4 <Justlrnal4@users.noreply.github.com>
Co-authored-by: Chris Cook <ccook@nvms.com>
Co-authored-by: Thomas Paquette <thomas.paquette@gmail.com>
* feat(desktop): surface TTS/STT/terminal backends as Settings dropdowns
Every native tool backend that the agent supports now shows up as a
clickable picker in the desktop Settings UI instead of a free-text box.
Desktop Settings renders a config field as a <Select> only if its dotpath
is a key in ENUM_OPTIONS (helpers.ts::enumOptionsFor returns undefined ->
free-text <Input> otherwise). Three backend-selector fields were surfaced
in their sections but missing from the map, so users had to hand-type the
provider name and could reasonably assume it was unsupported:
- tts.provider — now lists all built-in TTS backends incl. xai (Grok)
- stt.provider — local/groq/openai/mistral/elevenlabs
- terminal.backend — local/docker/singularity/modal/daytona/ssh
Each list is kept in sync with its backend source of truth (TTS:
agent/tts_registry.py::_BUILTIN_NAMES + tools/tts_tool.py; STT + terminal:
hermes_cli/config.py / tools/terminal_tool.py). The existing
enumOptionsFor current-value-append keeps any hand-typed/legacy value
selected, and command-type TTS providers still work.
Reported for Grok/xAI TTS, which was already a fully-wired built-in
provider (tts.provider: xai + XAI_API_KEY) with no picker entry.
* feat(desktop): expose per-backend TTS/STT/terminal config fields in Settings
Completes the backend-coverage pass: not just the provider PICKER but every
backend's own config fields are now tunable from desktop Settings, so a user
who picks (e.g.) Grok TTS can also set its voice/language without hand-editing
config.yaml.
Also fixes the STT provider dropdown: added 'xai' (Grok STT), which the
transcription dispatcher (tools/transcription_tools.py) handles but the
config.py comment had omitted — the dispatch ladder is the source of truth.
New Settings fields (Voice section):
- TTS xai (voice_id, language), minimax (model, voice_id), mistral
(model, voice_id), gemini (model, voice), neutts (model, device),
kittentts (model, voice), piper (voice)
- STT openai (model), groq (model), mistral (model)
New Settings fields (Advanced section):
- terminal docker_image / singularity_image / modal_image / daytona_image
New ENUM_OPTIONS dropdowns: stt.provider (+xai), stt.openai.model,
stt.mistral.model, tts.openai.model, tts.elevenlabs.model_id,
tts.neutts.device. Each list mirrors the backend generator's accepted values
(tools/tts_tool.py, tools/transcription_tools.py, hermes_cli/config.py).
i18n: FIELD_LABELS/FIELD_DESCRIPTIONS cover all locales via the English
fallback in config-settings.tsx; added native translations to ja/zh/zh-hant.
Secrets (provider API keys, modal/daytona tokens, ssh host/key) intentionally
stay in Settings -> Keys as env vars, not duplicated as config fields.
The desktop statusbar turn timer read a single process-global $turnStartedAt,
set/cleared only for the active session. With multiple same-profile sessions
running at once, switching to session B reset the one shared clock, so
session A's still-running turn "restarted from zero" the moment you left it —
exactly the behaviour @Da7_Tech reported after the profile-scoped session work.
Move turnStartedAt onto ClientSessionState so each session owns its own turn
clock. The global atom now just mirrors whichever session is focused, written
on view-sync (the flush that already stages the active session's state). A
backgrounded turn keeps counting in its own cache entry, and focusing it
restores its real elapsed time instead of zeroing it.
Set/clear sites: message.start (seed), message.complete + error + interrupted
bail (clear), and the session.info running-state path (seed if missing / clear
on stop) so a turn that goes busy via session.info — e.g. resuming a session
that's already running — also gets a clock.
Note: the agent loop itself never froze — every same-profile session runs in
its own backend thread and background deltas are buffered per-session. This
fixes the timer-reset symptom; the "no live progress until you return" is
inherent to a single-view transcript and is out of scope here.
The desktop sidebar fetched the unified cross-profile session list as
profile='all' and filtered it client-side by the active profile. On a
large multi-profile install the active profile's rows could be windowed
out of the cross-profile recency page entirely, so switching to a profile
agent showed an empty history panel (and the 'all' fetch could exceed the
15s IPC timeout on startup). Scope the fetch to the active profile so its
own page comes back on its merits, and bump the session-list IPC timeout
to 60s. profileScope is now a refreshSessions dep, so the existing
gateway-open effect re-pulls on profile switch.
Complete the desktop app's tool-backend configuration so it fully
mirrors `hermes tools`. The toolset config panel already did
enable/disable, provider selection, and API-key save/reveal/clear — the
one remaining gap was post-setup install hooks, which previously just
told the user to run the CLI.
Now a provider that declares a post_setup hook (browser Chromium,
Camofox, cua-driver, KittenTTS/Piper, ddgs, Spotify, Langfuse, xAI)
renders a 'Run setup' button that spawns the install via the
`POST /api/tools/toolsets/{name}/post-setup` endpoint and tails the
log inline, feeding the desktop activity rail — mirroring
command-center's runSystemAction poll loop. On completion the panel
refreshes so a now-installed backend reports itself ready.
- hermes.ts: runToolsetPostSetup(name, key) -> profile-scoped POST.
- toolset-config-panel.tsx: PostSetupRunner sub-component (Run setup
button + inline live log + activity-rail upsert + unmount guard),
replacing the CLI-only placeholder.
- i18n: replace the orphaned `toolsets.postSetup` (CLI redirect) string
with proper post-setup UI keys (hint / run / running / starting /
complete / error / failed) across en, ja, zh, zh-hant + types.
- test: post-setup run+poll+log-tail coverage; mock additions for
runToolsetPostSetup/getActionStatus/activity store.
Works against local AND remote backends: all calls route through the
desktop's single `hermes:api` IPC handler to connection.baseUrl, so a
connected remote configures the remote host's tools (keys -> remote
.env, install runs on the remote). Relies on the post-setup endpoint +
'hermes tools post-setup' CLI shipped in #40418.
Verification: tsc -b clean (all 5 locales), eslint clean (the lone
exhaustive-deps warning is pre-existing on origin/main), vitest 4/5
(new post-setup test passes; the failing 'saves an API key' test fails
identically on origin/main — pre-existing EnvVarActionsMenu drift).
* feat: uninstall the Chat GUI without removing the agent (CLI + desktop UI)
Adds a GUI-only uninstall path so people can remove the desktop Chat GUI
while keeping the Hermes agent + their config/sessions/.env, and surfaces
the three CLI uninstall modes inside the desktop app's Settings → About.
CLI:
- New hermes_cli/gui_uninstall.py: cross-platform discovery + removal of the
desktop GUI's artifacts (source-built dist/release/node_modules + build
stamp, the packaged app bundle, and the Electron userData dir) on Linux,
macOS, and Windows. Never touches the agent source, venv, or user data.
- `hermes uninstall --gui` removes only the Chat GUI; `--gui-summary` prints a
JSON install snapshot (used by the desktop UI to gate options + detect a
missing agent for a future lite client).
- `hermes uninstall --yes` / `--full --yes` now run non-interactively, sharing
the destructive sequence via a new _perform_uninstall() helper. The keep-data
and full flows also sweep the GUI artifacts.
Desktop:
- electron/desktop-uninstall.cjs: pure helpers mapping each mode (gui/lite/full)
to CLI flags, resolving the running app bundle per OS, and building the
detached cleanup script that waits for the app to exit, runs the Python
uninstall, and removes the bundle.
- IPC hermes:uninstall:summary / :run, preload bridge, and types.
- Settings → About "Danger zone" with the three options; agent-removing
options hide when no local agent is detected.
Tests: tests/hermes_cli/test_gui_uninstall.py (22 pass with the existing
uninstall tests), electron/desktop-uninstall.test.cjs (17 pass, wired into
test:desktop:platforms). Docs: desktop.md "Uninstalling" + cli-commands.md.
* fix(desktop): tear down backend process tree before GUI uninstall (Windows lock safety)
The desktop uninstall cleanup script waited only on the desktop app's own
PID, but a backend grandchild (gateway / pty terminal / hermes REPL) can
outlive it and keep hermes.exe + venv files mandatory-locked on Windows —
making the script's rmdir half-fail and leaving a partial install, the same
failure class as the self-update path's #37532.
- main.cjs: runDesktopUninstall now awaits releaseBackendLock() before
spawning the cleanup script — tree-kills every backend PID the desktop owns
(primary + pool) via taskkill /T /F and polls the venv shim until unlocked.
Extracted the shared core out of releaseBackendLockForUpdate so both the
update hand-off and the uninstaller use the identical, incident-hardened
teardown. No-op on macOS/Linux (no mandatory locks).
- desktop-uninstall.cjs: Windows cleanup script removes the bundle via a
bounded rmdir retry loop (10x, 1s) instead of a single rmdir, since Windows
releases directory handles lazily even after the holding process exits.
- Dropped a fragile tasklist|findstr reap-by-path attempt; the Electron-side
tree-kill-by-PID is the reliable mechanism.
Tests: desktop-uninstall.test.cjs updated for the retry-loop output (17 pass).
* fix(desktop): address review on GUI uninstall (venv self-delete, gates, wait-loop)
Resolves @OutThisLife's review on #40355:
1. full mode now gated on agent presence (needsAgent: true). It removes the
agent + user data, so on a lite client with no local agent it's hidden
like lite — no more offering to remove an agent that isn't there.
2. (Finding 3, the real bug) lite/full no longer rmtree the venv from the
venv's OWN python. On Windows a running python.exe is mandatory-locked, so
that half-fails. New lightweight 'python -m hermes_cli.uninstall --mode X'
entrypoint (stdlib-only imports) lets the desktop run agent-removing modes
under the SYSTEM python (findSystemPython) with PYTHONPATH=<agentRoot>, so
import hermes_cli resolves from source while the venv is torn down. Falls
back to venv python + logs when no system python (gui-only unaffected).
3. Windows wait-loop is now bounded (60 tries, matching POSIX) and matches the
PID as a whole space-delimited token via findstr (no substring 99->990
trap, no redundant bare find). set HERMES_HOME/PID/PYTHONPATH now quoted.
4. Renamed the misleading 'returns null for dev run' test — the dev-run safety
is shouldRemoveAppBundle(isPackaged=false), which the test now asserts.
Docs: note that --gui on a source checkout also sweeps node_modules/build
output. Tests: 18 python + 19 desktop pass.
The manage overlay held its own local jobs list, so deleting/creating a
job there left the sidebar's $cronJobs atom stale until the 30s poll
(delete all → section lingered). Make the overlay read and mutate the
shared atom directly (updateCronJobs), so sidebar + overlay are one
source of truth and changes show immediately.
Cron's manage overlay now uses the shared OverlaySplitLayout (sidebar
list + main detail) instead of a bespoke PageSearchShell + grid, matching
profiles. Extract OverlayNewButton (the "+ New …" sidebar action) so
profiles and cron share one component — its hover underline is scoped to
the label span so it never strokes the leading icon glyph.
* fix(desktop): unify dialog/overlay buttons on shared Button component
Replace raw <button> action/text controls across the modal layer (boot
failure, install, update, onboarding, clarify, model-visibility,
notifications, gateway menu) with the shared Button + its variants
(text / ghost / icon-xs). Drops the bespoke square-cornered styling so
every dialog matches the app's slightly-rounded button system, and
swaps clarify-tool's hardcoded "Skip" for the existing i18n string.
* feat(desktop): add dev-only dialog gallery for auditing overlays
A code-split, DEV-gated harness (toggle ⌘/Ctrl+Alt+Shift+D) that triggers
every dialog/overlay so their buttons can be eyeballed in one place:
store-driven overlays (boot failure, updates, notifications, sudo/secret)
plus in-place dialogs (confirm, profile create/rename, attach-url, model
picker/visibility, clarify, tool approval). Never ships to production.
* fix(desktop): use Ctrl+Shift+D for dialog gallery (mac-friendly)
The Cmd/Ctrl+Alt+Shift+D chord is impractical on macOS (Option mangles
the keypress). Ctrl+Shift+D is the same chord on every platform and uses
neither Cmd nor Option.
* fix(desktop): stop overriding button icon size to size-4
Action buttons hardcoded size-4 icons, overriding the Button component's
built-in size-3.5. That extra 2px is why boot-failure / onboarding / gateway
buttons looked chunkier than the settings "Apply" (size-3.5 spinner) despite
being the same component+size. Drop the overrides so icons inherit 3.5.
* feat(desktop): add BrandMark, use it in the updates overlay hero
New BrandMark renders the white logo.png on a hardcoded brand-blue tile
(#0000F2 light / #222 dark), replacing the generic Sparkles hero glyph in
the "update available" overlay. Trying it here first to iterate on the look.
NOTE: apps/desktop/public/logo.png is currently a 1x1 placeholder — the tile
renders now; the glyph appears once the real white logo art is dropped in.
* feat(desktop): add real logo.png asset, render it white in BrandMark
logo.png is blue line-art on transparent, so force it white via filter to
read on both the brand-blue (#0000F2) and near-black (#222) tiles. Bump the
glyph to 62% of the tile for the portrait aspect.
* fix(desktop): BrandMark renders logo as-is, no light bg/radius/padding
Drop the white filter, the hardcoded light-mode blue tile, the radius, and
the inner padding. Logo now fills the tile over a transparent surface in
light mode; dark keeps the #222 tile.
* fix(desktop): bump updates-overlay BrandMark to size-16
* feat(desktop): use downscaled karb.webp in BrandMark
Swap the BrandMark glyph to karb.webp, downscaled from 1129x1418/888KB to
254x320/81KB for the hero badge.
* feat(desktop): use nous-girl mark in BrandMark, invert in dark
Key the white background to transparent so only the black line-art remains
(384px/20KB webp). Light mode shows black art; dark mode flips it white via
dark:invert on the #222 tile. Drop the now-unused karb.webp and logo.png.
* fix(desktop): BrandMark uses nous-girl as-is (no transparent/invert)
The dark-mode invert read as a creepy negative. Use the opaque black-on-white
mark unchanged in both themes; drop the white-key, dark:invert, and #222 tile.
* fix(desktop): give BrandMark an explicit white bg tile
* fix(desktop): use nous-girl.jpg directly in BrandMark
* perf(desktop): downscale nous-girl.jpg to 256x256 (466KB -> 19KB)
* style(desktop): bump nous light --theme-secondary to 14% blue
* fix(desktop): outline button is transparent, not chrome-filled
The outline variant used bg-background (the chrome color), so on cards/overlays
with a different surface it rendered as an odd gray-blue fill (visible on the
boot overlay's Repair install / Use local gateway). Make it bg-transparent so
it inherits the surface like a real outline. Reverts the unrelated
--theme-secondary tweak.
* fix(desktop): clean outline button — thin border, no shadow/fill
Drop shadow-xs and the resting fills (light chrome bg, dark bg-input/30) so
outline is just a thin clean border with a subtle hover, in both themes.
* fix(desktop): stop forcing tertiary bg on outline buttons
A global [data-variant='outline'] rule set background: var(--ui-bg-tertiary),
which (attribute-selector specificity) overrode the cva bg-transparent — so
outline buttons always showed the pale tertiary fill on cards/overlays
regardless of the variant classes. Scope that fill to secondary only; outline
is now a true transparent border.
* style(desktop): unified overlay design system + restore #38631 flat-UI
Overlays/dialogs/toasts share a custom shadow-nous (downward-weighted) and
--stroke-nous hairline instead of hard borders: boot-failure, install,
notifications, model-picker, onboarding, prompt-overlays, updates, Dialog.
- button: outline is a 1px inset ring (no fill/shadow); chrome lives in Button
- BrandMark: 256px nous-girl mark replaces sparkle glyphs (updates/onboarding/about)
- onboarding: conditional header, lemniscate-bloom loaders, OTP device-code boxes,
NOUS CONNECTED hero (ascii decode) + cuneiform easter egg, "Begin" matrix exit
- shared LogView + ErrorState; math/ascii loaders over "Loading..." text
- appearance-settings flattened to SegmentedControl/ListRow; keybind-panel on
shadow-nous + text-variant reset
- restore flat-UI clobbered by #38631's stale-squash (4a1907bd1): command-center,
profiles, skills, messaging, cron de-boxed; shared SearchField + PAGE_INSET_X;
profiles back on OverlaySplitLayout; skills tabs+search one row, no row dividers
* refactor(desktop): clean pass — drop dead code, dedupe, fix stale docs
- log-view: drop unused `bare` prop + forwardRef (no caller uses ref)
- install-overlay: drop `stateOverride` (only the removed dev gallery used it)
- profiles: ProfilesViewProps down to { onClose } (drop vestigial section/titlebar)
- onboarding: hoist shared PROVIDER_ROW_CLASS (was duplicated 2x)
- brand-mark / error-state: tighten comments, fix stale AlertCircle reference
Master/detail separated by gap, not a divider; header rule, schedule-
preview chip border, and error-box border removed (subtle bg tints carry
the grouping/semantics). Fully borderless to match the flat overlay pass.
De-box the master/detail Cron page ahead of #40708's flat-UI system:
drop the two rounded-lg border/bg cards for a single --ui-stroke-tertiary
hairline between list and detail, swap the header divider and schedule-
preview chip onto the same stroke/bg-quinary tokens. No --stroke-nous
(that lands with #40708); only tokens already on this branch.
Sidebar and Cron page each carried a near-identical name→prompt→id
title fn. Collapse to a single jobTitle in cron/job-state.ts (the
page variant, which also falls back to script then 'Cron job').
Redesign the cron surface around jobs (not run sessions), following
power-user patterns (GitHub Actions / Airflow / Dagu): master → detail → output.
Sidebar "Cron jobs" section:
- jobs with a state pip + live next-run countdown
- click toggles an inline run-history peek; a run opens its chat (active run highlighted)
- hover: trigger-now + manage (open the Cron page)
- capped at 50 with a "50+" badge
Cron page: de-nested from a collapse-in-row accordion to master/detail —
job list + the selected job's schedule, actions, and run history.
Backend: GET /api/cron/jobs/{id}/runs lists a job's run sessions.
Share STATE_DOT/jobState across both surfaces; drop dead code/keys.
Scheduler sessions (source=cron) were listed in recents, where their
`[IMPORTANT: …]` first-message previews spammed the list — and because
cron runs are always newest, a burst of them consumed the whole recents
page budget and starved real conversations (sidebar showed 0 sessions).
Recents and cron jobs are now two independent lists:
- Backend: /api/sessions + /api/profiles/sessions accept source /
exclude_sources; session_count gains exclude_sources. Recents query
excludes cron; the cron section queries source=cron.
- Desktop: separate $cronSessions store + refreshCronSessions fetch, a
collapsed (persisted) "Cron jobs" section below Sessions that only
renders when cron sessions exist, with its own bounded scroller.
Add rebindable actions for the high-frequency gaps: focus composer, open
model picker, next/prev session, search sessions (⌘⇧F), show files/
terminal tab, and nav→artifacts. Reconcile the duplicate Shift+N new-
session listener into session.new's defaults, and surface the remaining
context-local shortcuts (⌘↵ steer, ⌘L terminal selection, ⌘W close
preview) as read-only rows so the panel is the honest source of truth.
Add a central keybind registry + nanostore so desktop hotkeys are
discoverable and user-rebindable. A titlebar ⌨ button (and ⌘/) opens a
collapsible map grouped by Composer (read-only) / Profiles / Session /
Navigation / View; click any chip to capture a new combo. Overrides
persist to localStorage as a delta against shipped defaults, so future
default changes aren't shadowed by a stored snapshot.
Migrates the previously scattered inline listeners (palette, command
center, new session, sidebar, theme) into the registry, and adds profile
switch/cycle/create + default-profile hotkeys.
* feat(desktop): surface every provider + models from `hermes model` in the GUI
The desktop GUI's model/provider choices were starved relative to the
`hermes model` CLI. Onboarding listed ~8 providers, Settings → Model only
showed authenticated ones, because the global `/api/model/options` endpoint
called build_models_payload() without the full-universe flags the TUI's
model.options JSON-RPC already used.
- web_server.py: `/api/model/options` now passes include_unconfigured +
picker_hints + canonical_order (matching the TUI handler), so every GUI
surface fed by it sees all 37 canonical providers with auth hints.
- Settings → Model: provider dropdown lists every provider; picking an
unconfigured api_key provider shows an inline 'paste key → Activate' flow
(auto-selects the recommended default); OAuth/external route to onboarding.
- Onboarding: the API-key form is now driven by the full provider catalog
(curated five first, then the rest), not a hand-maintained list of five.
- types/hermes.ts: ModelOptionProvider gains authenticated/auth_type/key_env.
- Tests: model-settings covers the full-universe list + inline activation;
fixed a pre-existing stale assertion (nous / hermes-4 was never rendered).
* feat(desktop): /model in GUI chat opens the model picker instead of a dead-end notice
Typing /model in a desktop chat session printed "/model uses the desktop
model picker instead of a slash command" and did nothing — it never opened
the picker. (The slash worker can't render the prompt_toolkit modal /model
opens in the CLI, so the desktop just showed the unavailable-notice.)
- use-prompt-actions.ts: intercept /model client-side. No args → open the
desktop model picker overlay (setModelPickerOpen) — the same full
provider+model picker as the status-bar button. With args (/model <name>
[--provider ...]) → run the switch directly via slash.exec so power users
can still type it.
- desktop-slash-commands.ts: export isModelPickerCommand() so the hook can
detect picker-owned commands without duplicating the PICKER_OWNED_COMMANDS set.
- Test: covers isModelPickerCommand for /model (+ args) vs non-picker commands.
* fix(desktop): make onboarding provider lists scrollable + clean up card styling
The full-catalog onboarding picker could overflow the modal with no way to
scroll — the OAuth provider list and the api-key grid both grew past the
viewport, hiding the key input and the bottom action row (overflow-hidden card,
no scroll container).
- Scope a `max-h-[60dvh] overflow-y-auto` region to just the provider list /
api-key card grid; the "other providers" disclosure, key input, and action
row stay pinned and reachable.
- Inner `p-1` so card borders / focus rings aren't clipped by the scroll viewport.
- Flatter card styling: drop the persistent border, the redundant selected-state
checkmark, and the modal shadow — selection now reads from the ring alone (the
muted "already configured" check stays).
- Remove the " — set up" suffix from the Settings → Model provider dropdown; the
inline setup flow already signals unconfigured providers.
* fix(desktop): identify api-key onboarding cards by env var, not id
Selecting "Google Gemini" also highlighted "Google AI Studio": the curated
catalog and the backend-derived providers can collide on `id` (a provider slug
can equal a curated id like `gemini`), so `option.id === o.id` matched two
cards at once. Key selection (and the React key + snap-back effect) on `envKey`
instead, which the catalog dedups and is therefore unique per card.
---------
Co-authored-by: Brooklyn Nicholson <brooklyn.bb.nicholson@gmail.com>
Conversation rhythm:
- Single `--paragraph-gap` knob drives paragraph spacing both inside a
markdown block and between consecutive prose parts, out-specifying Tailwind
Typography's prose margins. Code cards carry the same gap themselves so it
holds at any Streamdown nesting depth.
- Two-tier vertical rhythm: `--turn-block-gap` separates scaffolding (tools /
thinking) from the reply; `--tool-row-gap` keeps a tool run tight.
- Drop the prose indent so prose, tools, todos, and thinking share one left
edge. `---` renders as quiet spacing, not a heavy rule.
Flat tool list:
- Tools always render as a standalone-row stack, never a "Tool actions · N
steps" group. assistant-ui slices the tool range unstably (interleaved live
vs. reconstructed-consecutive when settled), so grouping reshuffled the whole
turn the instant it settled. Flat rows are pixel-identical either way.
- Inline approvals can no longer be buried in a collapsed group body.
- Remove the now-dead grouping helpers from tool-fallback-model.
Empty thinking:
- Suppress reasoning disclosures with no visible text (encrypted / spinner-
coerced reasoning) instead of leaving an empty "Thinking" header.
- Tail stall indicator returns "thinking" when a running turn goes quiet.
Streaming cadence:
- Smooth character-reveal decouples visible cadence from bursty arrival.
- Flush queued text deltas before applying tool events so a tool row can't
jump ahead of its preceding text.
- Disable Nagle on the GUI WebSocket so per-token frames aren't coalesced.
Polish: clarify/patch/vision_analyze tool meta, queue-panel + diff-lines
spacing, sticky human bubble expands on focus (not hover).
Strip shadow-composer (and its focus/open-state variants) from the
composer surface, composer fallback surface, and the shared user-bubble
base class. Also drop the !important box-shadow override on
[data-slot=composer-surface] that re-applied the shadow regardless of
the utility class, so the flatter look actually takes effect.
Switching the main model never touches auxiliary slot pins (they're
independent, sticky per-task overrides). A user who switches main away
from a now-unpaid provider keeps paying 402s on every background aux call
until they manually reset those pins — silently, with no UI signal.
- /api/model/set scope:'main' now returns stale_aux: slots still pinned
to a provider different from the new main (additive field).
- Desktop Model Settings shows a switch-time notice after Apply AND a
persistent banner when any loaded aux slot mismatches the main provider,
both wired to the existing 'Reset all to main' action.
- Never auto-clears pins — a dedicated cheaper aux model is a legitimate
config; surface-and-offer instead of nuking.
- Fixes a stale pre-existing assertion in the panel test (main model now
renders via selectors, not a standalone label).
The inline steer note used a ⏩ emoji. Emit a structured `steer:<text>`
system note and render it in SystemMessage as a codicon (compass) row —
same style as slash-status output. No emoji in the transcript.
Cmd/Ctrl+Enter now steers when there's a steerable draft and is a no-op
otherwise — it never falls through to a send, so the shortcut can't
surprise-send. Plain Enter keeps its role (queue while busy, send when idle).
A steer rides inside a tool result (the only role-alternation-safe slot
mid-turn), so a bare "User guidance:" line reads as untrusted tool content —
well-behaved models refuse it as suspected prompt injection (observed live:
"I only follow instructions from you directly, not ones injected through
command results").
- Wrap steers in a bounded, self-describing [OUT-OF-BAND USER MESSAGE] marker
(prompt_builder.format_steer_marker), shared by both drain sites.
- Add STEER_CHANNEL_NOTE to the core system prompt so the model expects this
exact marker and trusts it as a genuine user message — while still ignoring
lookalikes buried in tool/web/file output. Static text → byte-stable prompt,
no prompt-cache regression; gated on the agent having tools.
- Desktop: steer ack is now an inline transcript note (⏩ steered · …) instead
of a toast.
Marker is intentionally static (not a per-session nonce) to honor the
byte-stable system-prompt caching policy; nonce hardening noted as follow-up.
The desktop app could only queue while busy — `/steer` was in the palette
but had no first-class affordance, so the "nudge the agent mid-turn without
interrupting" lane was effectively unreachable.
Add a steer action to the composer: while busy with a text-only draft, a
steering-wheel button (and Cmd/Ctrl+Enter) injects the text into the live
turn via the `session.steer` RPC — the gateway folds it into the next tool
result so the model reads it on its next iteration. Plain Enter still queues.
steerPrompt returns false when the gateway has no live tool window (or the
RPC errors), and the composer re-queues the words so nothing is lost — the
same safety net as a plain queue.
Builds on @naqerl's arrow up/down history (previous commit), making
ArrowUp do the right thing when a queue exists.
ArrowUp/ArrowDown priority:
1. Editing a queued turn → walk older/newer through queued entries,
saving each edit; ArrowDown past the newest exits and restores the
pre-edit draft.
2. Empty composer + queued turns → ArrowUp opens the newest queued entry
for editing (the row's pencil), so Enter saves it back to the queue
instead of firing a new message — the gap the history nav had alone.
3. Otherwise → sent-message history recall (unchanged).
Also: Esc cancels an in-progress queue edit (else interrupts).
Cleanups on the integrated code: fold the browse-state reset into the
existing session-change effect (drop the duplicate ref+effect); reuse
loadIntoComposer for history recall; sort imports; add curly braces +
the runDrain sessionId dep (lint).
* fix(desktop): make composer message queue reliable
The queue felt 'dumb' because of three real bugs:
1. Drained-after-interrupt sends went silent. cancelRun sets
interrupted:true and nothing reset it; submitPromptText's optimistic
seed preserved it, and the message stream drops every delta while
interrupted. So Send-now-while-busy and any interrupt+drain submitted
the next turn into a muted session. Fix: a fresh submit is a new turn —
seed interrupted:false.
2. Back-to-back queue drains stalled. The drain fires on the busy->false
settle edge, but busyRef (synced from the busy store by a separate
effect) can still read true on that same edge, so the drained send hit
the busy guard, returned false, and the entry was never removed. Fix:
fromQueue sends bypass the busyRef guard (the queue drain lock
serializes them); the user path keeps the guard.
3. Double-enter-to-interrupt killed single non-queue turns. The hidden
450ms timer meant a natural double-tap after sending stopped the agent.
Fix: empty Enter while busy is a no-op; interrupting is explicit —
Stop button or Esc.
Also: clean stop (no [interrupted] marker), Send-now works while busy
(promote + interrupt + auto-drain), settle on the interrupted completion
path. Adds regression tests and unblocks the prompt-actions suite by
completing its stale @/hermes mock.
* fix(desktop): float the queue panel as an overlay so the chat doesn't resize
The queue list rendered in-flow inside the composer root, so its height
fed --composer-measured-height (the composer rect drives the thread's
bottom padding + last-message clearance). Queuing a message grew that
rect and the whole chat visibly resized.
Anchor the panel out of flow above the composer (absolute bottom-full,
capped at 40vh with internal scroll). It no longer contributes to the
measured height, so the thread layout stays put and the list overlays the
(already faded) chat. Still collapsible via the panel's own
disclosure header.
* fix(desktop): queue panel collapsed by default + shared border with composer
- Default the queue disclosure to collapsed (compact 'N queued' pill)
instead of expanded.
- Drop the gap and merge the panel into the composer: square bottom
corners, no bottom border/radius, and overlap down by the Root's pt-2
(-mb-2) so the panel's borderless bottom lands on the composer surface's
top border — one continuous bordered shape.
* style(desktop): tighten queue panel padding
* style(desktop): trim queue-ux comments to house style
* style(desktop): drop 'Cursor' references from comments
The new IME repro test has two it() blocks but the desktop suite registers
no global testing-library auto-cleanup, so the first render() leaked its
editor into the second test and getByTestId('editor') matched two nodes.
Add afterEach(cleanup) so each case renders into a fresh DOM.
DOM repro that drives compositionstart -> input(preedit) -> compositionend with
no trailing input event and asserts the composer payload (send button) becomes
visible for committed CJK/IME input. Regression guard for #39614.
Typing committed multi-character IME text (e.g. Chinese "你好", and equally
Japanese/Korean or any IME-composed script) left the send button hidden until
an unrelated edit. Input events during composition carry uncommitted preedit
text and are intentionally skipped; the code assumed a trailing input event
after compositionend would deliver the finalized text, but Chromium does not
reliably emit one on Windows IMEs. The committed text therefore never reached
composer state, so `hasComposerPayload` stayed false and the send button stayed
hidden (deleting a char fired a non-composition input that finally synced it).
Flush the live editor text into composer state in onCompositionEnd. Extract the
shared sync into flushEditorToDraft so input and compositionend both update
state.
Fixes#39614
Follow-up to #39921. That PR scoped session.resume + prompt.submit to a
session's profile, but a BRAND-NEW chat (session.create) under a non-launch
profile was still built and persisted against the dashboard's launch profile.
Two visible symptoms in app-global remote mode (one dashboard, many profiles):
1. "who are you" in profile S replied as the launch (default) profile/agent —
the agent was built with the launch HERMES_HOME, so config/SOUL/identity
came from the wrong profile.
2. "session not found" on later resume — _ensure_session_db_row persisted the
row into the launch profile's state.db via _get_db(), so the session lived
in the wrong db, the unified list mis-tagged it (it showed up under BOTH
profiles), and resume routed to the wrong one.
Fix — carry the owning profile through the create path too:
- session.create accepts an optional `profile`; resolves its home and stores
`profile_home` on the session (alongside what resume already set).
- _start_agent_build binds that profile's HERMES_HOME while building the agent
(config/skills/model/identity resolve to it) and hands the agent the profile's
state.db so turns persist there.
- _ensure_session_db_row writes the row into the profile's state.db, not the
launch db — fixing the duplicate row + mis-tag + resume 404.
- desktop sends the new-chat profile on session.create.
None/launch profile → unchanged (single-profile and per-profile-remote setups
take the same path). Verified live against a one-dashboard / multi-profile
remote: a new chat under `work` builds as work's agent (correct SOUL identity),
persists ONLY to work's state.db (launch db stays empty), the unified list tags
it `work` exactly once, and it resumes cleanly.
tests/test_tui_gateway_server.py: _make_agent mocks updated for the session_db
param added in #39921's build path.
Introduce a lightweight React context-based i18n layer for the desktop
app and translate the UI into Simplified Chinese.
- New apps/desktop/src/i18n module: typed Translations interface, en + zh
locale tables, I18nProvider/useI18n, localStorage-persisted locale
(defaults to English), and language endonym metadata for the picker.
- Wire I18nProvider at the app root in main.tsx.
- Refactor 24 desktop screens/components to read strings from the `t`
object instead of hard-coded English.
- Add a unit test for the i18n context.
* fix(desktop): cross-profile session history in app-global remote mode
#39894 made remote-profile sessions first-class for PER-PROFILE remote
overrides. But the common setup — Settings → Gateway → "All profiles" → Remote
— writes app-GLOBAL remote mode (connection.json top-level mode:'remote', empty
profiles map), which the intercept didn't recognize. Switching to a non-launch
profile then 404'd every session read, so no history showed for it.
In global remote mode a SINGLE backend serves every profile via ?profile= (it
reads each profile's state.db off the remote host's own disk — verified: one
dashboard returns /api/profiles and /api/profiles/sessions?profile=all across
all profiles). The fix: when no per-profile override matches but global remote
mode is active, route per-session reads/mutations to that one backend and KEEP
the ?profile= param so it opens the right state.db (instead of bailing to the
local path and dropping the profile scope).
- new globalRemoteActive() — true for connection.json mode:'remote' or the
HERMES_DESKTOP_REMOTE_URL env override.
- per-session branch: per-profile override → route sans profile (own db);
global mode → route to the single backend WITH ?profile= preserved.
- unified list is unchanged in global mode: it already passes through to the one
backend, which aggregates all profiles natively.
Verified live against a one-dashboard / multi-profile remote (Austin's topology):
cross-profile transcript reads load (was 404), rename/delete route to the right
profile, unified list spans both profiles.
Known limitation (architectural, not fixed here): LIVE chat as a non-launch
profile still needs a per-profile dashboard on the remote — the dashboard binds
HERMES_HOME once at process start, so one global backend can't run an agent
turn as another profile. Session history/read/mutate now work regardless.
* fix(gateway): resume + chat any profile over one global-remote dashboard
The REST half of this branch made cross-profile session history visible in
app-global remote mode, but resume + chat still went over the WebSocket gateway,
which was hard-bound to the dashboard's launch profile. Resuming a non-launch
profile's session 404'd ("session not found") and sending spawned a new session
— because session.resume/prompt.submit had no profile concept and the live
agent + state.db were process-global to the launch profile's HERMES_HOME.
Make the WS gateway per-session profile-aware so ONE dashboard can serve every
local profile on its host (the app-global remote topology):
- session.resume accepts an optional `profile`. _profile_home() resolves that
profile's home on this host; resume opens THAT profile's state.db, binds its
HERMES_HOME (ContextVar override) while building the agent so config/skills/
model resolve to it, and passes the profile db to the agent so turns persist
to the right state.db. The owning profile_home is stored on the session.
- prompt.submit re-binds the stored profile_home for the turn thread (mid-turn
home reads — memory, skills — resolve to the resumed profile), reset in finally.
- _make_agent gains an optional session_db param (defaults to _get_db()).
- _load_cfg honors the home override (falls back to _hermes_home) so a resumed
profile loads its own config; cache keyed on resolved path.
- desktop: session.resume now sends the owning profile.
Omitted/launch profile → unchanged (single-profile and per-profile-remote setups
are byte-for-byte the same path). Verified live against a one-dashboard /
multi-profile remote: resuming a non-launch profile's session loads its history,
runs a real turn against THAT profile's home/env, and persists to its state.db.
tests/tui_gateway/test_protocol.py: _make_agent mocks updated for the new param.
Follow-up to the read-routing fix: make remote-profile sessions fully
first-class, not just resumable.
Mutations (rename/archive/delete) went through the same hermes:api handler but
never carried the owning profile, so they hit the local primary's state.db --
which has no row for a remote session. Deleting/archiving/renaming a remote
session silently no-op'd or 404'd, and the row reappeared on next refresh.
- hermes.ts: setSessionArchived/deleteSession/renameSession take the owning
profile and pass it as request.profile so Electron routes to that profile's
backend (matching the read path). Callers now forward session.profile.
- main.cjs: generalize the intercept (read -> request) to also reroute
DELETE/PATCH on /api/sessions/{id} for remote profiles, stripping the profile
param (the remote serves its own state.db; no cross-profile semantics there).
- web_server.py: DELETE /api/sessions/{id} gains a profile param for parity with
GET/PATCH (local cross-profile delete).
Also fix the unified-list merge: it concatenated each remote's page onto the
primary's without re-windowing, so a limit=N request could return up to
N*(1+remotes) rows and report the primary's (stale) total. Now it over-fetches
limit+offset from each remote (from offset 0), re-sorts by recency, re-windows
to the page, and recomputes total/profile_totals from the remote counts.
Verified live against a remote backend: rename/archive/delete mutate the remote
db; page 1 windows to limit, profile_totals reflect remote counts, page 2 has no
overlap with page 1. tsc -b clean; connection-config tests pass.
Two switch-time regressions from the multi-profile rail work:
- "Session not found" (4007): pruneSecondaryGateways idle-reaps a
non-active profile's backend; switching back respawns a *fresh*
backend that mints new runtime ids, but runtimeIdByStoredSessionId is
never pruned. resumeSession's cache fast-path then makes a dead runtime
id active and returns, so session.usage + the next prompt 404. Probe
the cached id; on rejection drop the stale mapping and fall through to
a full resume that rebinds a live id.
- "Forgets the LLM setting": $currentModel is a nanostore set only by
refreshCurrentModel (gatewayState->open, etc). A swap fires
invalidateQueries() (react-query only) and keeps the socket 'open', so
the model/pill kept showing the previous profile. Re-pull both when
$activeGatewayProfile changes.
* feat(desktop): per-profile remote gateway hosts
Profile switching silently failed whenever the desktop was connected to a
remote backend: the rail routed non-active profiles to a local pool backend,
but spawnPoolBackend hard-threw "Profiles are unavailable when connected to a
remote Hermes backend", and the renderer swallowed the error into an infinite
reconnect backoff while still marking the profile active. Remote was also a
single app-global setting, so there was no way to give a profile its own host.
Add per-profile remote hosts so each profile can point at its own backend:
- connection.json gains a validated `profiles` map; profileRemoteOverride()
(pure, unit-tested) selects an explicit per-profile remote.
- resolveRemoteBackend(profile) precedence: per-profile override → env override
→ global remote → local spawn. spawnPoolBackend now connects to a profile's
remote (no local child) instead of throwing; startHermes resolves the primary
profile's remote.
- coerce/sanitize connection config are scope-aware (global vs named profile)
and preserve each other's entries; IPC get/save/apply/test thread an optional
profile. Per-profile apply drops only that profile's pool backend.
- Settings → Gateway adds an "Applies to" scope selector reusing the existing
URL/token/OAuth/test UX per profile.
Tests: connection-config pure suite (+6) and desktop platform suite pass;
tsc/eslint/vitest clean.
* refactor(desktop): DRY per-profile remote helpers
Share connectionScopeKey + normAuthMode from connection-config.cjs (drop the
main.cjs copy), collapse the scope/auth ternaries, route the env remote through
buildRemoteConnection, and fold the duplicated remote-block validation into
buildRemoteBlock. No behavior change; pure suite + live E2E still green.
