Buzz Desktop v0.5.1 now renders Hermes' ACP model menu in agent runtime
settings. Add a short note under the Buzz Desktop host section explaining
where the list comes from (the shared authenticated-provider inventory),
the provider:model / custom:<name>:<model> ID shapes, and that a pick is
session-scoped rather than a Hermes-wide default change.
Replaces the half-duplex per-playback barge monitors with ONE listener
that runs for the entire agent turn in continuous voice mode: armed at
utterance-submit, disarmed when the turn is fully done (response + TTS
finished). Fixes Teknium's live report that voice interruption never
works: (a) not while the LLM is generating, (b) not while TTS plays.
Root causes:
- HALF-DUPLEX GAP: the barge monitor only spawned when TTS playback
STARTED (cli.py streaming/whole-file paths, gateway _tts_stream_begin).
During LLM generation there was NO microphone listener at all.
- PLAYBACK DEAFNESS: the monitor calibrated its VAD noise floor WHILE the
speaker was blasting TTS (speaker bleed baked into the floor), then
multiplied it by 8x with a 1s strictly-consecutive block requirement —
normal speech could rarely reach the trigger, and the 2s grace
swallowed early interjections.
New model — tools/voice_mode.full_duplex_listen():
- Pre-playback calibration: quiet-room noise floor established at turn
start and HELD through playback (never recalibrated against bleed).
- Phase-aware trigger: generation = floor x voice.barge_in_threshold_multiplier
(new config, default 3.0, justified by synthetic-frame tests);
playback = additionally clamped to a 1500-RMS minimum so bleed alone
can't trip; 4000-RMS ceiling keeps speech always reachable.
- Windowed-majority detection (>=80% of a 300ms window) instead of the
strictly-consecutive counter that reset on intra-word energy dips.
- Grace on playback ONSET only (voice.barge_in_grace_seconds, default
down 2.0 -> 0.5) — suppresses the onset transient, not the mic.
- Debug diagnostics at every decision point (calibrated floor, per-window
RMS above 50% of trigger, trip/no-trip, grace suppressions) — always
logger.debug, mirrored to stderr under HERMES_VOICE_DEBUG=1.
Phase behavior (CLI cli.py + tui_gateway/server.py, same model):
- generation: speech interrupts the in-flight turn via the SAME seam the
typed/Ctrl+C interrupt uses (agent.interrupt()), cuts any pending TTS
pipeline so the stale reply never plays, and submits the captured
interjection (pre-roll capture, first syllable kept) as the next turn.
- playback: cuts TTS (streaming pipeline stop + fallback speak stop
events + file player) and submits the capture.
- stop phrase honored in BOTH phases: mid-generation 'stop' interrupts
the turn AND ends the voice chat (stop everything).
- one listener instance spans generation -> playback (no re-arm race);
double-arm refused (CLI _voice_fd_active / gateway _fd_listener_active).
Gateway specifics: _arm_full_duplex_listener() at _run_prompt_submit turn
start and inside _tts_stream_begin; _speak_text_with_barge registers its
(stop, done) pair in _fd_speak_pipelines so fallback speaks are cut and
tracked; _tts_stream_barge_in_monitor kept as a shim that arms the new
listener. Desktop renderer owns its own mic path (voice-barge-in.ts) and
is unaffected; if desktop backend-mic mode is used it inherits via the
gateway.
Tests: full_duplex_listen synthetic-RMS suite (speech-over-bleed trips,
bleed alone doesn't, quiet floor held through playback, grace window,
multiplier math 3x vs 8x, windowed-majority dips), CLI listener phase
tests (generation interrupt seam, playback cut, lifecycle spans phases,
double-arm, config forwarding, stop-phrase-mid-generation), gateway
generation-phase interrupt + stop-phrase tests. Generation-interrupt
test sabotage-verified.
Fixes#67278. Since config v12 (see #8776), custom_providers: list is
legacy — the migration converts it to the providers: dict and the
resolver reads the dict first (runtime_provider.py). Docs still taught
the legacy list as primary.
- integrations/providers.md: all 8 YAML examples converted to
providers: dict (field mapping code-verified: api, default_model,
transport), one consolidated legacy-format note
- configuring-models.md, configuration.md, credential-pools.md,
migrate-from-openclaw.md, provider-runtime.md, faq.md: examples and
prose flipped to dict-first; legacy list noted as still-read
- adding-providers.md untouched (sole mention is a literal test
filename)
Follow-ups on top of @DonutsDelivery's salvaged reaper commit (#64141):
- create_from_config() now parses lsp.idle_timeout (invalid values fall
back to DEFAULT_IDLE_TIMEOUT) — previously the constructor knob was
unreachable from config.yaml (config exposure adapted from #36892 by
@0xbWy and #68091 by @9miya20)
- canonical default declared in hermes_cli DEFAULT_CONFIG so config
discovery surfaces the knob (per sweeper review note on #64980)
- reaper loop survives transient sweep errors instead of dying and
silently re-opening the leak (gap flagged in #68091 review)
- eventlog.log_reaped(): one INFO line per sweep + clears the
log_active announce cache so respawns re-announce at INFO
- docs: replace the stale 'no idle-timeout reaper' paragraph with the
new lifecycle description + config reference
- tests: reuse-refresh protection (the regression teknium's sweeper
requested on #64141), reaper-survives-error, config propagation,
invalid-value fallback, DEFAULT_CONFIG/manager-constant sync
Saying OR typing a configured stop phrase (voice.stop_phrases, default
"stop") now ends the voice chat everywhere, not just classic CLI PTT:
- hermes_cli/voice.py: new explicit on_stop_phrase callback through
start_continuous/stop_continuous. The force-transcribe path previously
DISCARDED the stop phrase silently — with auto_restart=False the client
re-arms the next capture, so the conversation never ended. Both halt
paths now fire on_stop_phrase (fallback: on_silent_limit for legacy
callers) as user intent, distinct from the no-speech timeout.
- tui_gateway/server.py: voice.record wires on_stop_phrase and emits
voice.transcript {stop_phrase: true} after flipping HERMES_VOICE(_TTS)
off and stopping streaming TTS — same teardown as /voice off. The TTS
barge-in monitor stop-checks its transcript too. prompt.submit consumes
a TYPED bare stop phrase at the server-side choke point when voice mode
is on (returns {voice_stopped: true}, no turn starts).
- ui-tui: voice.transcript {stop_phrase} ends voice mode with a clear
'voice chat ended' notice (distinct from the no-speech-limit message);
submitPrompt releases the busy latch on a consumed voice_stopped reply.
- cli.py: _typed_voice_stop in process_loop — typing a bare stop phrase
while voice mode/continuous is active ends voice mode instead of
sending 'stop' to the agent; typed 'stop' outside voice mode is
unchanged. Voice transcripts skip the check (already stop-checked).
- desktop: interceptsTypedVoiceStop — the composer's onSubmit ends the
live voice conversation (same path as clicking end on the pill) when a
bare stop command is typed with no attachments; renderer-owned loop, so
handled client-side like the existing spoken isVoiceStopCommand.
- tools/voice_mode.py: transcribe_recording never lets the Whisper
hallucination filter swallow a configured stop phrase (e.g. 'bye'
configured as a stop phrase is both a hallucination-blocklist entry and
a stop phrase — stop-phrase check now wins).
Tests: continuous-loop signal (sabotage-verified), force-transcribe stop
signal + legacy fallback, hallucination-filter ordering, typed-stop CLI
unit tests (voice on/off/longer text), prompt.submit typed-stop gateway
tests, TUI vitest for stop_phrase event handling, desktop vitest for the
typed-stop interceptor.
The Skills Hub 'Marketplace' tab showed a single useless entry: Anthropic
changed .claude-plugin/marketplace.json to bundle-shaped plugins whose
source is './', so all plugins collapsed to one identifier pointing at the
repo root, and the second marketplace repo (aiskillstore/marketplace) is
gone (404). Everything in anthropics/skills is already surfaced by the
GitHub tap as the Anthropic tab, making this source fully redundant.
Removes ClaudeMarketplaceSource and all wiring: source router, index
builder (crawl + floors + sort order + rate-limit messaging), extract
labels/install/URL mapping, hub UI tab, web server labels, CLI limits,
docs (en + zh), the legacy index-cache snapshot, and test fixtures.
Stale skills-index entries with source 'claude-marketplace' still install
fine: HermesIndexSource fetches via resolved GitHub paths generically.
Adds gpt-transcribe (OpenAI's new file-transcription model, $0.0045/min)
to the OpenAI STT provider:
- OPENAI_MODELS set: gpt-transcribe is recognized so provider
auto-correction keeps it on OpenAI and rejects it on Groq
- Language hint wiring: gpt-transcribe replaces the singular
'language' field with a 'languages' list; the API rejects the legacy
field, so the hint is sent via extra_body {languages: [..]}
- Config comment (DEFAULT_CONFIG), cli-config.yaml.example, desktop
settings enum, and docs (en + zh-Hans) updated
- Tests: model pass-through, languages-list hint shape, legacy singular
hint preserved for gpt-4o-transcribe, Groq auto-correction
gpt-live-transcribe (realtime WebSocket, $0.017/min) is NOT wired here:
the file-based STT pipeline has no realtime session path; it belongs in
a future realtime/voice-mode integration.
The multiplexed listener now rejects the default API_SERVER_KEY on
/p/<profile>/ prefixes (fail-closed per-profile keys). Add the
multi-profile routing section with an explicit breaking-change callout
for the next release notes.
Command providers legitimately reference their own API keys in shell
templates (curl one-liners). The #70342 scrub removes ALL provider keys,
which would break such setups. Add a per-provider env_passthrough list
(TTS + STT) that copies named variables back from the parent env, plus
docs and tests. Scrub stays the default; passthrough is explicit opt-in.
HERMES_LOCAL_STT_COMMAND rendered quoted placeholders into a
user-configured template and passed the result to shell=True. Shell
metacharacters in the template therefore remained executable syntax even
though the placeholder values themselves were quoted.
Tokenize the rendered template and invoke it as an argv list while
preserving the existing timeout, closed stdin, and Windows creation flags.
Lock the invocation contract with metacharacter regression coverage and
document explicit shell wrapping for trusted templates that need it.
Salvages #32694
Co-authored-by: Ernest Hysa <takis312@hotmail.com>
Command-type TTS providers validated output_format against a hardcoded
{mp3,wav,ogg,flac} set; any other value was silently coerced back to mp3,
which then mismatched the output path the post-run check expects. This
blocked common ffmpeg-producible containers/codecs — notably m4a (AAC),
the portable choice for WeChat/iOS/mobile voice files — with no
config-only path (only a local source patch, lost on every update).
Widen COMMAND_TTS_OUTPUT_FORMATS to add m4a, aac, amr, opus. This only
permits a command provider to declare these; the user's command still
produces the file (e.g. via ffmpeg). No built-in provider behavior
changes and no new required config.
Update the two tests that pinned the old set, and add a positive case
covering the new formats. Document the supported output_format values.
Follow-up on the salvaged #69915 commits:
- verified env vars against block/buzz crates/buzz-acp/src/config.rs
(BUZZ_RELAY_URL, BUZZ_PRIVATE_KEY, BUZZ_API_TOKEN, BUZZ_ACP_AGENT_COMMAND/
ARGS, BUZZ_ACP_RELAY_OBSERVER, BUZZ_ACP_AGENT_OWNER) and kind 24200
observer frames against docs/nips/NIP-AO.md
- dropped unverifiable claims: docs/hermes-agent-acp.md link (404 upstream),
relay-directory profile publication / External-agents card walkthrough,
'bot role' membership phrasing
- replaced key provisioning with the actual buzz-admin generate-key /
add-member flow from the buzz-acp README
- retitled the section 'Buzz channels (relay bridge)' and cross-linked it
with the Buzz Desktop managed-runtime section both ways; permission
paragraph now points at the owner-only warning instead of duplicating it
- zh-Hans translation of the new section + retitle to ACP 宿主集成
Address review feedback on #31693:
- Regression tests assert extra_body == {"lang_code": ...} is forwarded
when tts.openai.language is configured, and omitted when unset/empty
- Document tts.openai.language as intended for OpenAI-compatible
endpoints that support lang_code (e.g. Kokoro-FastAPI)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The `text_to_speech` tool schema accepted only `text` and `output_path`,
so style direction (tone, emotion, pacing, whispering) could never reach
the OpenAI backend — even though `gpt-4o-mini-tts` (Hermes's OpenAI
provider default) treats `instructions` as its primary voice-design
control.
This plumbs an optional `instructions` argument through the tool schema,
the handler lambda, and `text_to_speech_tool()` into
`_generate_openai_tts`, where it is forwarded to
`client.audio.speech.create()` only when truthy. Empty/None values still
omit the key entirely, preserving behavior on `tts-1`/`tts-1-hd` and
strict OpenAI-compatible servers.
The same passthrough unblocks self-hosted OpenAI-compatible voice-design
servers (Qwen3-TTS-VoiceDesign on oMLX, etc.) that are already wired in
via `tts.openai.base_url` — the established convention per #9004 and the
TTS config docs — without inventing a new provider backend.
Tests: `tests/tools/test_tts_instructions.py` covers backend passthrough,
tool-level threading, schema declaration, and the empty-string/absent
omission cases. `tests/tools/test_tts_max_text_length.py` fake_openai
signature widened to accept the new kwarg.
Refs NousResearch/hermes-agent#14196
The Buzz Desktop section covered discovery only. The combination that
actually needs stating: the hermes-acp toolset carries terminal and
execute_code, and buzz-acp answers session/request_permission itself with
allow_once instead of surfacing it. A Hermes agent in Buzz runs shell
commands on the host unattended.
Buzz defaults every agent to owner-only and that default holds through to
the spawned process env, so nobody reaches the open state by accident.
But Anyone is one dropdown change away with no warning shown, and it
hands channel-wide shell access to the host.
Also record that the two obvious mitigations do not work: approvals.mode
manual raises the request but Buzz auto-approves it anyway, and
platform_toolsets.acp does not narrow the ACP toolset. Both verified by
running rm -rf through the ACP path under each setting.
Amend the Approvals section too — it promised prompts route back to the
editor, which is only true for hosts that choose to surface them.
en + zh-Hans.
Signed-off-by: SHL0MS <SHL0MS@users.noreply.github.com>
Existing installs predate the install.sh hermes-acp launcher, and hermes
update never re-runs setup_path, so ACP hosts (Zed, JetBrains, Buzz)
still resolve Hermes as unavailable until a reinstall. _ensure_acp_launcher()
writes the launcher next to an existing hermes command in ~/.local/bin or
/usr/local/bin during hermes update — delegating to the sibling launcher so
it is correct for every install layout. Never follows symlinks (#21454),
skips unwritable dirs, no-op on Windows (venv Scripts is already on PATH).
Docs: add a Buzz Desktop section to the ACP page (en + zh-Hans).
Per-job cron inference pins are now user-owned: the agent-facing cronjob
tool schema no longer exposes model/provider/base_url, and the registered
handler ignores them even if a model hallucinates the old parameters.
Users set pins via the dashboard, hermes cron create/edit --model/--provider,
or jobs.json directly — and once set, a pin sticks until the user changes it.
Existing agent-era pins are grandfathered untouched.
New cron.model / cron.model_provider config keys give the cron fleet its
own default model, independent of the chat model. Fire-time resolution:
per-job pin > cron.model > HERMES_MODEL > model.default. An axis covered
by the explicit cron-fleet default is deliberate routing, not drift, so
the #44585 fail-closed guard skips it — switching your chat model with
/model or hermes model no longer breaks unpinned cron fleets.
- tools/cronjob_tools.py: drop model param from agent schema + handler;
remove now-dead _resolve_model_override
- cron/scheduler.py: cron.model/model_provider resolution + per-axis
drift-guard skip
- cron/jobs.py: snapshot resolution mirrors the new precedence
- hermes_cli/subcommands/cron.py + hermes_cli/cron.py: --model/--provider
on hermes cron create/edit
- hermes_cli/config.py: cron.model / cron.model_provider defaults
- docs: cron.md model-resolution tip rewritten
Saying 'stop' in a voice chat did nothing — the transcript was just
submitted to the agent as a normal turn, so the conversation never ended.
The only way out was the mouse/hotkey. That's not how a hands-free voice
assistant should work.
useVoiceConversation now checks each finished utterance against a spoken
stop-command matcher BEFORE submitting: 'stop', 'stop listening', 'never
mind', 'goodbye', 'cancel', 'that's all', etc., optionally addressed
('hey hermes, stop'). A match ends the conversation (flips enabled=false,
which drives the existing end() teardown — mic close, playback stop, wake
re-arm) instead of sending a turn.
Deliberately conservative: only a WHOLE-utterance stop phrase matches, so
substantive requests that merely contain 'stop' ('stop the docker
container', 'how do I stop a process') still go through.
- apps/desktop/src/lib/voice-stop-word.ts: isVoiceStopCommand() matcher
- use-voice-conversation.ts: onStopWord option + intercept before submit
- use-composer-voice.ts: wire onStopWord -> end the conversation
- 6 matcher tests (bare/multi-word/addressed stop; substantive requests
with 'stop' pass through; bare address words don't match)
- docs: note the spoken-stop behavior
'hey hor' triggered the wake word: the default sensitivity was 0.5, which
for openWakeWord IS the raw per-frame score threshold — openWakeWord's own
permissive baseline that near-misses clear. Raised the default to 0.6 so
phonetic near-misses fall short while real 'hey hermes' (typically 0.9+)
still fires easily.
Also fixed a real cross-engine inconsistency found while checking: the
sensitivity knob is documented 'higher = stricter' and behaves that way
for openWakeWord (threshold = sensitivity) and sherpa (0.05 + 0.4*s), but
Porcupine's own 'sensitivities' param runs the opposite way (higher = MORE
false alarms, per Picovoice). Turning sensitivity up made Porcupine looser
— backwards. Now inverted (1 - sensitivity) so 'higher = stricter' holds
for every engine.
- tools/wake_word.py: default 0.6; _sensitivity fallback uses _DEFAULTS;
Porcupine sensitivity inverted with rationale
- hermes_cli/config.py + docs: default + consistent-direction note
- tests: Porcupine inversion, default>=0.6 regression, fallback-to-default
openWakeWord scores one ~80ms frame at a time and the detector fired the
instant a SINGLE frame crossed threshold — so a stray phoneme in background
conversation could trigger the wake word unintentionally (reported in
testing). A real utterance of the phrase holds a high score across several
consecutive frames; an ambient blip spikes just one.
_OpenWakeWordEngine now requires N consecutive over-threshold frames
(wake_word.confirmation_frames, default 3) before firing. The streak resets
on any sub-threshold frame and on engine reset() (pause/resume), so a
pre-pause frame can't count toward a post-resume fire. confirmation_frames=1
restores the old single-frame behavior; clamped 1..10.
Only openWakeWord is affected — sherpa (streaming transducer) and porcupine
decode the whole phrase internally and already reject single-frame spikes.
- tools/wake_word.py: _confirmation_frames() accessor, streak logic in
process()/reset(), config default
- hermes_cli/config.py: wake_word.confirmation_frames documented default
- tests: 5 new (spike rejected, sustained fires once, =1 legacy behavior,
reset clears streak, config clamp) — 58 wake tests green
- docs: 'Reducing false triggers on ambient speech' section
openWakeWord's ONNX backend returns near-zero scores on Apple Silicon
(dscripka/openWakeWord#336), so "Hey Hermes" never crossed the 0.5
threshold: the listener armed, the microphone worked, and nothing fired.
Bisecting the pipeline puts the fault in exactly one stage — feeding the
same audio through both backends, the melspectrogram front-end is
bit-identical (maxdiff 0.00000) and the wake classifier agrees on
identical features, while the shared embedding model diverges by 45.44.
Cross-feeding confirms it: tflite features scored through the *onnx*
classifier give 0.9948 vs 0.000009 for onnx features. A telling
secondary symptom is that scores fall as input gets louder (0.5x ->
0.00031, 8x -> 0.000066), which is garbage inference rather than a weak
detection.
Selecting tflite in config alone does not fix it. openWakeWord hardcodes
`import tflite_runtime.interpreter` but declares tflite-runtime for
`platform_system == "Linux"` only; on macOS the equivalent wheel is
ai-edge-litert, so that import always fails and model.py silently
downgrades back to onnx. The result is a detector that reports itself
listening and can never fire.
- default the backend per platform (tflite on macOS ARM64, onnx
elsewhere) instead of hardcoding onnx, and pick the matching bundled
model artifact
- bridge tflite_runtime -> ai_edge_litert through sys.modules, in-process,
with no writes to site-packages
- refuse the silent onnx downgrade on macOS ARM64 and report the missing
runtime through check_wake_word_requirements() so the GUI surfaces an
actionable hint rather than arming a dead ear
- lazy-install ai-edge-litert via its own feature key, because lazy-dep
specs cannot carry PEP 508 markers (_spec_is_safe rejects ";")
An explicit `inference_framework` in config still wins, so anyone pinning
a backend keeps it.
Verified on macOS 26.5.2 / M-series: "hey hermes" scores 0.0005 on onnx
and 0.9423 on tflite from the same clip, with cross-phrase controls at
0.0003. Live over-the-air through the real microphone fires 4/4
utterances (peak 0.9532).
Two fixes from live testing (Teknium):
1. Desktop installs now ship the wake/voice stacks up front.
install.sh + install.ps1 desktop stages run 'uv pip install
-e .[wake,voice]' (best-effort, lazy-install remains the fallback)
before building the app, so the first ear-click arms instantly
instead of sitting through a multi-minute onnxruntime download.
CLI-only installs keep the lazy path — [all] curation unchanged.
2. The vanished ear: the STT/TTS gate made wake.status call
check_tts_requirements(), whose edge path runs _import_edge_tts →
lazy_deps.ensure — a synchronous PIP INSTALL inside a status poll.
On a venv without edge-tts that blew the desktop's 30s RPC timeout,
armWakeWord caught the error, the atom never learned enabled=true,
and the ear unmounted. _tts_ready is now a pure probe: deps missing
+ lazy installs allowed counts as ready (installs at first speak)
WITHOUT touching pip; check_tts_requirements only runs once deps
are present. Regression test asserts the probe never calls it while
deps are missing.
The wake loop is wake → record → STT → agent → TTS. Arming without
either end configured gives a mic that hears you and then does nothing
perceivable — a useless experience. check_wake_word_requirements now
probes both (same probes /voice uses: stt.enabled + provider != none;
check_tts_requirements) and refuses with a pointer to `hermes tools`
naming exactly which half is missing. The desktop ear hides (available:
false already hides the button), /wake on prints the hint on CLI/TUI.
wake.start also validates requirements BEFORE persisting
wake_word.enabled, so a refused gesture can't leave config claiming on
while nothing can ever arm.
Tests: per-half and both-missing hint assertions; existing requirements
tests pinned via _voice_loop_ready so they don't depend on the test
venv's installed voice stack. E2E: stt.enabled=false in a real config
-> unavailable with the speech-to-text hint.
Internal testing (macOS): clicking the ear froze the button for ~30s,
then it went blue but 'hey hermes' never fired even though STT worked.
Two distinct bugs:
1. Frozen-then-timeout button: first-use wake.start lazy-installs the
detection engine (onnxruntime is a large wheel), which blows the
desktop's default 30s WS request timeout — the RPC 'failed' client-
side while the backend kept installing and armed later on its own.
wake.start now gets a 180s budget and the pending state says
'arming — first use may take a minute while the engine installs'
instead of a silent disabled button.
2. Armed but deaf: macOS grants mic permission per PROCESS. The
renderer having mic access (STT working) does not grant the Python
backend anything — CoreAudio hands an unentitled process a 'working'
stream that delivers zeros forever, so the listener looks healthy
and can never hear the phrase. The detector now tracks frame peaks:
10s of consecutive near-zero frames sets audio_silent, logged with
the exact macOS Settings path, cleared automatically when audio
appears. Surfaced everywhere: wake.status (audio_silent + hint),
desktop ear tooltip (kept visible while listening), /wake status on
TUI (⚠ line) and classic CLI, plus a docs troubleshooting section.
Tests: detector silent-flag set/recover cycle (fake silent/loud
streams), desktop tooltip keeps the dead-mic hint while listening.
44 wake Python tests, 22 desktop + 14 TUI vitest green.
Clicking the desktop ear button or running /wake on|off now writes
wake_word.enabled to config.yaml (live, saved for future sessions), so the
feature no longer requires hand-editing config before the UI toggle works.
- wake.start accepts persist:true (explicit gesture): flips
wake_word.enabled on in config before arming; response reports
enabled_persisted. Passive auto-arm paths (desktop gateway-ready,
TUI reconnect) never pass it, so a mic can't become persistently
enabled without a deliberate user action.
- wake.stop accepts persist:true: writes wake_word.enabled: false so
auto-arm stays off next session; reports disabled_persisted.
- Split the refusal reason: 'disabled' (feature off in config — a
persisted gesture turns it on) vs 'disabled_for_surface' (explicit
wake_word.surface scoping, which persist does NOT override).
- Classic CLI /wake on|off and bare-toggle persist the flag too
(skips the write when config already matches).
- Desktop tooltip now maps refusal codes to friendly text (mirrors
the TUI's START_REASON_TEXT) instead of showing raw codes like
disabled_for_surface.
- Docs: quick-start notes the toggle persists; ear-button mention.
One sherpa listener now enrolls every wake-enabled profile's phrase
(defaulting to "hey <profile name>") and reports WHICH phrase fired.
wake.detected gains a profile field; the desktop live-switches to the
matching profile (same path as the profile rail), opens a fresh session
there, and starts hands-free voice. The single-profile CLI/TUI print the
hermes -p switch command for foreign-profile phrases instead of
answering as the wrong profile. Opt out per listener with
wake_word.profile_routing: false.
New "sherpa" wake_word provider: the configured phrase is BPE-tokenized
at runtime against a small streaming zipformer KWS model (~13 MB English,
one-time download cached under HERMES_HOME), so ANY typed phrase works
with zero training — including per-profile phrases like "hey coder".
wake.sherpa lazy-dep group + [wake] extra grow sherpa-onnx/sentencepiece;
requirements probe routes per provider; sensitivity maps onto sherpa
keywords_threshold. E2E-verified on real audio (target phrase fires,
foreign phrase stays silent, reset drops buffered state).
From #53378: ships hey_hermes.onnx/.tflite (openWakeWord pipeline,
Apache-2.0) under tools/wakewords/, resolves the default (and hey_hermes
aliases) to the bundled file, ensures openWakeWord base feature models
are fetched for custom paths too, and updates config defaults + docs
from hey_jarvis to hey hermes.
Regenerate uv.lock for the [wake] extra (openwakeword, pvporcupine,
onnxruntime) so uv lock --check passes. Replace angle-bracket URLs in
wake-word.md with markdown links — MDX treats <https://...> as JSX.
Makes the wake word a tri-surface feature with one configurable owner.
- wake_word.surface ("auto" | "cli" | "tui" | "gui") + shared
wake_surface_enabled() gate consulted by every surface, so exactly one
place owns the listener and the new session it opens.
- tui_gateway: wake.start/stop/pause/resume/status RPCs + a wake.detected
event, sharing one server-side detector for both TUI and desktop. The
detector yields the mic to voice.record (pause on capture start, resume
on terminal) and to the desktop's browser mic (wake.pause/resume).
- TUI (Ink): arm wake.start on gateway.ready; on wake.detected open a
fresh session and start voice capture.
- Desktop (Electron): arm wake.start on connect; on wake.detected open a
fresh session.
- CLI now gates on wake_surface_enabled("cli"); /wake status shows surface.
- Tests for the surface gate; docs cover the surface knob + cross-surface.
Adds an opt-in, on-device hotword listener for the CLI. With
wake_word.enabled (or /wake on), Hermes listens in the background for a
wake phrase; on detection it starts a fresh session, captures one
utterance through the existing voice pipeline, and answers — the
"Hey Siri" pattern.
- tools/wake_word.py: provider-pluggable detector (openWakeWord, free
local default; Porcupine, premium) over the shared 16 kHz sounddevice
capture path. Background daemon thread with pause/resume so it yields
the mic during a voice turn.
- CLI wiring: startup listener (off-thread), on-wake flow, an idle
watchdog that resumes the detector after each turn, cleanup hook, and
a /wake [on|off|status] command.
- config.yaml wake_word section; PORCUPINE_ACCESS_KEY as an optional
secret. Engines lazy-install via the [wake] extra.
- Hands a transcript to the input queue exactly like voice mode, so no
system-prompt/cache mutation. No new core model tool.
- Tests (mocked, no live audio/network) + feature docs.
When an operator changes the global model/provider config, warn that
unpinned cron jobs with stored snapshots will fail-closed on their next
run. Adds a cron.model_drift_guard config opt-out (default true) for
fleets that should deliberately track changing global defaults.
Addresses #59031. Original PR #59177 by @doncazper.
Figma's mcp.figma.com register endpoint is a client_name allowlist
(Claude Code / Codex succeed; Hermes Agent 403s) and returns a client
secret while advertising auth_method=none, then requires the secret on
token exchange. Auto-set client_name + client_secret_post for Figma
hosts, pass oauth cfg through login/add paths, force interactive OAuth
for hermes mcp login from non-TTY desktop shells, and ship a catalog
entry. Proven: hermes mcp login figma → 26 tools.
Saying EXACTLY a configured stop phrase (default: 'stop') and nothing
else now ends the voice conversation instead of being sent to the agent
as a prompt. Match is deliberately strict — whole utterance,
case-insensitive, surrounding punctuation stripped — so 'stop doing
that and try X' still reaches the agent.
- tools/voice_mode.py: is_voice_stop_phrase() + voice.stop_phrases
config loader (default ['stop'], [] disables, malformed config falls
back safely).
- hermes_cli/voice.py: shared continuous loop (TUI + desktop) halts on
a stop phrase exactly like the silent-cycle limit (fires
on_silent_limit so every UI turns voice off); stop_continuous
force-transcribe path swallows the phrase without counting a silent
cycle.
- cli.py: classic CLI push-to-talk/continuous path and barge-in
utterance path disable voice mode on a stop phrase.
- Config default voice.stop_phrases: ['stop']; docs updated.
Tests: tests/tools/test_voice_stop_phrase.py (27 tests,
sabotage-verified: loop test fails when detection is disabled);
voice suites green (110 + 44 passed).
- Normalize stt.groq.language: cast to str, strip, treat
empty/whitespace as unset (parity with xAI's str().strip()).
- Clarify "blank = auto-detect" inline comments in 4 docs/configs to
reflect the env-var fallback (HERMES_LOCAL_STT_LANGUAGE).
- Document that HERMES_LOCAL_STT_LANGUAGE also drives the local
faster-whisper provider, not just the CLI fallback.
- Add unit tests covering: omitted language when unset, config-supplied
language, env fallback, config-over-env precedence, whitespace
normalized to unset.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
