SIMPLEX_ALLOWED_USERS silently denied every contact when operators
listed display names instead of numeric contactIds. The SimpleX UI
never surfaces the numeric id, so display names are what operators
naturally put in the env var. _is_user_authorized only compared
source.user_id (the contactId), so the allowlist never matched.
Expand check_ids to include source.user_name for the simplex platform,
mirroring the existing WhatsApp phone-LID aliasing pattern. Adds doc +
setup-prompt clarification and three regression tests.
Salvaged from PR #40393. Adds manishbyatroy to release.py AUTHOR_MAP.
PR #15027 (5 days ago) shipped TELEGRAM_GROUP_ALLOWED_USERS as a chat-ID
allowlist. #17686 correctly renames that to sender user IDs and moves
chat IDs to TELEGRAM_GROUP_ALLOWED_CHATS. Without a shim, any user on
PR #15027's guidance would silently start rejecting group traffic on
upgrade.
- gateway/run.py: in _is_user_authorized, if TELEGRAM_GROUP_ALLOWED_USERS
contains values starting with '-' (chat-ID-shaped), honor them as chat
IDs and log a one-shot deprecation warning pointing users at the new
TELEGRAM_GROUP_ALLOWED_CHATS var.
- tests/gateway/test_unauthorized_dm_behavior.py: three new tests cover
legacy chat-ID values authorizing the listed chat, not crossing to
other chats, and mixed sender/chat values in the same var.
- website/docs/user-guide/messaging/telegram.md: rewrite the Group
Allowlisting section to document the new user/chat split + migration
note. Remove stale '/thread_id' suffix claim (code never parsed it).
- website/docs/reference/environment-variables.md: document all three
Telegram allowlist env vars.
Follow-up to the canonical-identity session-key fix: pull the
JID/LID normalize/expand/canonical helpers into gateway/whatsapp_identity.py
instead of living in two places. gateway/session.py (session-key build) and
gateway/run.py (authorisation allowlist) now both import from the shared
module, so the two resolution paths can't drift apart.
Also switches the auth path from module-level _hermes_home (cached at
import time) to dynamic get_hermes_home() lookup, which matches the
session-key path and correctly reflects HERMES_HOME env overrides. The
lone test that monkeypatched gateway.run._hermes_home for the WhatsApp
auth path is updated to set HERMES_HOME env var instead; all other
tests that monkeypatch _hermes_home for unrelated paths (update,
restart drain, shutdown marker, etc.) still work — the module-level
_hermes_home is untouched.
Follow-up to #9337: _is_user_authorized maps Platform.QQBOT to
QQ_ALLOWED_USERS, but the new platform_env_map inside
_get_unauthorized_dm_behavior omitted it. A QQ operator with a strict
user allowlist would therefore still have the gateway send pairing
codes to strangers.
Adds QQBOT to the env map and a regression test.
When SIGNAL_ALLOWED_USERS (or any platform-specific or global allowlist)
is set, the gateway was still sending automated pairing-code messages to
every unauthorized sender. This forced pairing-code spam onto personal
contacts of anyone running Hermes on a primary personal account with a
whitelist, and exposed information about the bot's existence.
Root cause
----------
_get_unauthorized_dm_behavior() fell through to the global default
('pair') even when an explicit allowlist was configured. An allowlist
signals that the operator has deliberately restricted access; offering
pairing codes to unknown senders contradicts that intent.
Fix
---
Extend _get_unauthorized_dm_behavior() to inspect the active per-platform
and global allowlist env vars. When any allowlist is set and the operator
has not written an explicit per-platform unauthorized_dm_behavior override,
the method now returns 'ignore' instead of 'pair'.
Resolution order (highest → lowest priority):
1. Explicit per-platform unauthorized_dm_behavior in config — always wins.
2. Explicit global unauthorized_dm_behavior != 'pair' in config — wins.
3. Any platform or global allowlist env var present → 'ignore'.
4. No allowlist, no override → 'pair' (open-gateway default preserved).
This fixes the spam for Signal, Telegram, WhatsApp, Slack, and all other
platforms with per-platform allowlist env vars.
Testing
-------
6 new tests added to tests/gateway/test_unauthorized_dm_behavior.py:
- test_signal_with_allowlist_ignores_unauthorized_dm (primary #9337 case)
- test_telegram_with_allowlist_ignores_unauthorized_dm (same for Telegram)
- test_global_allowlist_ignores_unauthorized_dm (GATEWAY_ALLOWED_USERS)
- test_no_allowlist_still_pairs_by_default (open-gateway regression guard)
- test_explicit_pair_config_overrides_allowlist_default (operator opt-in)
- test_get_unauthorized_dm_behavior_no_allowlist_returns_pair (unit)
All 15 tests in the file pass.
Fixes#9337
* docs: clarify WhatsApp allowlist behavior and document WHATSAPP_ALLOW_ALL_USERS
- Add WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to env vars reference
- Warn that * is not a wildcard and silently blocks all messages
- Show WHATSAPP_ALLOWED_USERS as optional, not required
- Update troubleshooting with the * trap and debug mode tip
- Fix Security section to mention the allow-all alternative
Prompted by a user report in Discord where WHATSAPP_ALLOWED_USERS=*
caused all incoming messages to be silently dropped at the bridge level.
* feat: support * wildcard in platform allowlists
Follow the precedent set by SIGNAL_GROUP_ALLOWED_USERS which already
supports * as an allow-all wildcard.
Bridge (allowlist.js): matchesAllowedUser() now checks for * in the
allowedUsers set before iterating sender aliases.
Gateway (run.py): _is_authorized() checks for * in allowed_ids after
parsing the allowlist. This is generic — works for all platforms, not
just WhatsApp.
Updated docs to document * as a supported value instead of warning
against it. Added WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to
the env vars reference.
Tests: JS allowlist test + 2 Python gateway tests (WhatsApp + Telegram
to verify cross-platform behavior).
* fix: rate-limit pairing rejection messages to prevent spam
When generate_code() returns None (rate limited or max pending), the
"Too many pairing requests" message was sent on every subsequent DM
with no cooldown. A user sending 30 messages would get 30 rejection
replies — reported as potential hack on WhatsApp.
Now check _is_rate_limited() before any pairing response, and record
rate limit after sending a rejection. Subsequent messages from the
same user are silently ignored until the rate limit window expires.
* test: add coverage for pairing response rate limiting
Follow-up to cherry-picked PR #4042 — adds tests verifying:
- Rate-limited users get silently ignored (no response sent)
- Rejection messages record rate limit for subsequent suppression
---------
Co-authored-by: 0xbyt4 <35742124+0xbyt4@users.noreply.github.com>
Adds WeCom as a gateway platform adapter using the AI Bot WebSocket
gateway for real-time bidirectional communication. No public endpoint
or new pip dependencies needed (uses existing aiohttp + httpx).
Features:
- WebSocket persistent connection with auto-reconnect (exponential backoff)
- DM and group messaging with configurable access policies
- Media upload/download with AES decryption for encrypted attachments
- Markdown rendering, quote context preservation
- Proactive + passive reply message modes
- Chunked media upload pipeline (512KB chunks)
Cherry-picked from PR #1898 by EvilRan with:
- Moved to current main (PR was 300 commits behind)
- Skipped base.py regressions (reply_to additions are good but belong
in a separate PR since they affect all platforms)
- Fixed test assertions to match current base class send() signature
(reply_to=None kwarg now explicit)
- All 16 integration points added surgically to current main
- No new pip dependencies (aiohttp + httpx already installed)
Fixes#1898
Co-authored-by: EvilRan <EvilRan@users.noreply.github.com>
WhatsApp DMs can arrive with LID sender IDs even when
WHATSAPP_ALLOWED_USERS is configured with phone numbers. The allowlist
check now reads bridge session mapping files (lid-mapping-*.json) to
resolve phone↔LID aliases, matching users regardless of which
identifier format the message uses.
Both the Python gateway (_is_user_authorized) and the Node bridge
(allowlist.js) now share the same mapping-file-based resolution logic.
Co-authored-by: Frederico Ribeiro <fr@tecompanytea.com>
Adds Feishu (ByteDance's enterprise messaging platform) as a gateway
platform adapter with full feature parity: WebSocket + webhook transports,
message batching, dedup, rate limiting, rich post/card content parsing,
media handling (images/audio/files/video), group @mention gating,
reaction routing, and interactive card button support.
Cherry-picked from PR #1793 by penwyp with:
- Moved to current main (PR was 458 commits behind)
- Fixed _send_with_retry shadowing BasePlatformAdapter method (renamed to
_feishu_send_with_retry to avoid signature mismatch crash)
- Fixed import structure: aiohttp/websockets imported independently of
lark_oapi so they remain available when SDK is missing
- Fixed get_hermes_home import (hermes_constants, not hermes_cli.config)
- Added skip decorators for tests requiring lark_oapi SDK
- All 16 integration points added surgically to current main
New dependency: lark-oapi>=1.5.3,<2 (optional, pip install hermes-agent[feishu])
Fixes#1788
Co-authored-by: penwyp <penwyp@users.noreply.github.com>
Add unauthorized_dm_behavior config (pair|ignore) with global default
and per-platform override. WhatsApp can silently drop unknown DMs
instead of sending pairing codes.
Adapted config bridging to work with gw_data dict (pre-construction)
rather than config object. Dropped implementation plan document.
Co-authored-by: Frederico Ribeiro <fr@tecompanytea.com>
