The #71637 prune fix cut one stage of -w startup, but the base-ref
resolution right after it still ran an uncapped-in-practice
'git fetch origin main' (timeout=30) on every launch — and on a flaky
smart-HTTP connection that fetch intermittently stalled to the full 30s,
then cascaded into step 2's SECOND 30s fetch. Measured: back-to-back
fetches of 0.9s, 1.0s, 63.5s on the same box with healthy TLS (~185ms).
_resolve_worktree_base now:
- skips the fetch entirely when FETCH_HEAD is < 5 min old and the
tracking ref exists (repeat launches pay zero network cost)
- caps the fetch at 5s and falls back to the locally-known tracking
ref (labelled 'cached') on timeout/failure instead of cascading into
a second fetch — genuine staleness stays backstopped by the pre-push
stale-base gate
- caps 'git remote show origin' the same way
Worst case drops ~60s -> ~5s; warm path is ~0.02s (was up to 30.8s).
sync_base=False and the offline HEAD fallback are unchanged.
Resolves the PR's conflict with main (2252 commits). Two conflicts, both
"each side added an independent block in the same place" — kept both:
- gateway/run.py — the housekeeping loop. This branch adds the Skill Sync
pulls inside the CURATOR_EVERY branch (12-space indent); main adds a
stale-session auto-archive as a sibling `if` at loop level (8-space).
Different scopes, so the naive union would have mis-nested the archive
block into the curator branch; kept each at its own indent level.
- tools/skill_manager_tool.py — the _edit_skill result dict. This branch
appends the org auto-propose note; main appends
_add_description_prompt_preview(). Independent, order-insensitive.
No behaviour dropped from either side.
Verified: 3552 passed / 0 failed across 63 suites (scope regenerated to
include main's new maybe_auto_archive / _add_description_prompt_preview
consumers) via scripts/run_tests.sh. `hermes sync` and `hermes sync status`
still work against a live token, resolving the production plane default.
The Pyright Optional-parameter warnings in skill_manager_tool.py are
pre-existing on main (`content: str = None` etc.), not introduced here.
Replaces the half-duplex per-playback barge monitors with ONE listener
that runs for the entire agent turn in continuous voice mode: armed at
utterance-submit, disarmed when the turn is fully done (response + TTS
finished). Fixes Teknium's live report that voice interruption never
works: (a) not while the LLM is generating, (b) not while TTS plays.
Root causes:
- HALF-DUPLEX GAP: the barge monitor only spawned when TTS playback
STARTED (cli.py streaming/whole-file paths, gateway _tts_stream_begin).
During LLM generation there was NO microphone listener at all.
- PLAYBACK DEAFNESS: the monitor calibrated its VAD noise floor WHILE the
speaker was blasting TTS (speaker bleed baked into the floor), then
multiplied it by 8x with a 1s strictly-consecutive block requirement —
normal speech could rarely reach the trigger, and the 2s grace
swallowed early interjections.
New model — tools/voice_mode.full_duplex_listen():
- Pre-playback calibration: quiet-room noise floor established at turn
start and HELD through playback (never recalibrated against bleed).
- Phase-aware trigger: generation = floor x voice.barge_in_threshold_multiplier
(new config, default 3.0, justified by synthetic-frame tests);
playback = additionally clamped to a 1500-RMS minimum so bleed alone
can't trip; 4000-RMS ceiling keeps speech always reachable.
- Windowed-majority detection (>=80% of a 300ms window) instead of the
strictly-consecutive counter that reset on intra-word energy dips.
- Grace on playback ONSET only (voice.barge_in_grace_seconds, default
down 2.0 -> 0.5) — suppresses the onset transient, not the mic.
- Debug diagnostics at every decision point (calibrated floor, per-window
RMS above 50% of trigger, trip/no-trip, grace suppressions) — always
logger.debug, mirrored to stderr under HERMES_VOICE_DEBUG=1.
Phase behavior (CLI cli.py + tui_gateway/server.py, same model):
- generation: speech interrupts the in-flight turn via the SAME seam the
typed/Ctrl+C interrupt uses (agent.interrupt()), cuts any pending TTS
pipeline so the stale reply never plays, and submits the captured
interjection (pre-roll capture, first syllable kept) as the next turn.
- playback: cuts TTS (streaming pipeline stop + fallback speak stop
events + file player) and submits the capture.
- stop phrase honored in BOTH phases: mid-generation 'stop' interrupts
the turn AND ends the voice chat (stop everything).
- one listener instance spans generation -> playback (no re-arm race);
double-arm refused (CLI _voice_fd_active / gateway _fd_listener_active).
Gateway specifics: _arm_full_duplex_listener() at _run_prompt_submit turn
start and inside _tts_stream_begin; _speak_text_with_barge registers its
(stop, done) pair in _fd_speak_pipelines so fallback speaks are cut and
tracked; _tts_stream_barge_in_monitor kept as a shim that arms the new
listener. Desktop renderer owns its own mic path (voice-barge-in.ts) and
is unaffected; if desktop backend-mic mode is used it inherits via the
gateway.
Tests: full_duplex_listen synthetic-RMS suite (speech-over-bleed trips,
bleed alone doesn't, quiet floor held through playback, grace window,
multiplier math 3x vs 8x, windowed-majority dips), CLI listener phase
tests (generation interrupt seam, playback cut, lifecycle spans phases,
double-arm, config forwarding, stop-phrase-mid-generation), gateway
generation-phase interrupt + stop-phrase tests. Generation-interrupt
test sabotage-verified.
Streamed responses no longer insert real newlines at terminal width —
logical lines are emitted whole and the terminal soft-wraps them, so
highlight-copy rejoins the full line (emulators only keep linebreaks
the app actually printed). This is the CLI equivalent of the TUI's
selection copy, which reads logical source lines from its screen
buffer. TTFT perception is preserved by mirroring the unfinished
line's tail into the spinner status text instead of chunk-printing.
/copy now prefers OSC 52 when running over SSH (SSH_CONNECTION /
SSH_TTY / SSH_CLIENT) — native tools there write the REMOTE clipboard,
which is never what the user wants. The CLI's OSC 52 writer also gains
tmux/screen DCS passthrough wrapping, mirroring the TUI's
wrapForMultiplexer. Fixes#31528 for the CLI surface.
Sabotage-verified: restoring the old chunk emitter fails 3 of the new
tests (hard-wrap detection, spinner mirror, unbreakable-run split).
Premise check on live main: barge-in machinery EXISTS for the per-turn
STREAMING pipeline only — cli.py chat() arms _voice_barge_in_monitor and
tui_gateway _tts_stream_begin arms _tts_stream_barge_in_monitor. What was
actually broken for spoken interruptions:
1. CLI whole-file fallback (_voice_speak_response_async — used whenever
streaming TTS cannot start: sounddevice missing, requirement probe
fails): NO monitor was ever armed, so talking over the reply did
nothing. Now arms _voice_barge_in_monitor in continuous voice mode.
2. Gateway fallback speak (tts_queue None → speak_text thread) and the
voice.tts RPC (desktop-triggered speech): speak_text ran bare, and
its internal streaming dispatch created a PRIVATE stop event nothing
could reach — uninterruptible even by stop_playback(). New
_speak_text_with_barge() runs the same barge monitor beside the speak
thread; hermes_cli.voice.speak_text/_speak_text_streaming accept an
external stop_event so a barge cuts the streaming pipeline too.
Stop-phrase handling and voice.transcript submission are inherited
from the shared monitor (merged #73933 behavior preserved).
3. False barge during TTS (the reason interruption "worked" then
self-cancelled or fired randomly): salvaged PR #71083 by @beardedeagle
(previous commit, kept authorship) — rolling-window VAD floor, 8x
multiplier, 4000-RMS trigger ceiling, barge_in_grace_seconds (2s)
before the mic opens, min-floor clamp. barge_in_grace_seconds is now
documented in DEFAULT_CONFIG.
Desktop spoken barge (renderer mic via voice-barge-in.ts) already covers
both its live-stream and fallback speech paths — verified, no change.
Long thinking/tool stretches in a voice conversation are dead air — the
user cannot tell whether the agent is alive. New: quiet, repeating soft
bubble blips while the agent works and no speech audio is flowing.
- tools/voice_mode.py: numpy-synthesized blips (no binary assets) — two
alternating low pitches (G4/E4) with pitch glide + smooth attack/decay
envelopes, ~0.8-1.2s randomized spacing, volume = voice.beep_volume * 0.5.
start_thinking_sound(should_play=...) / stop_thinking_sound() daemon-loop
lifecycle; macOS-TCC-safe (sounddevice output gated there → silent skip,
no per-second afplay churn). New mark_audio_output_active()/
is_audio_output_active() ref-count wraps play_audio_file and the
streaming OutputStream sentence writes so "audio is flowing" is accurate.
- Config: voice.thinking_sound (default true) off-switch.
- cli.py: starts when a voice-mode turn begins, per-blip gate skips while
TTS speaks / mic records / barge capture owns the mic; stopped in the
chat() finally on every exit path.
- tui_gateway/server.py: same lifecycle around _run_prompt_submit turns
(voice mode on), gated on is_audio_output_active + continuous capture.
- Desktop: renderer owns voice-conversation audio, so a matching WebAudio
implementation (src/lib/thinking-sound.ts, same envelope/pitches) runs
while conversation status === "thinking"; honors voice.thinking_sound
(via config store) and the shared sound-mute toggle; stops instantly on
speaking/listening/end.
One owner for the wording: voice_stop_hint() in tools/voice_mode.py —
sources the phrase from voice.stop_phrases (first entry) so a custom
phrase renders correctly, and returns "" when the feature is disabled
(stop_phrases: []) so no surface shows a hint.
- CLI: printed in /voice on output (style-matched dim notice).
- TUI: voice.toggle action=on now carries stop_hint; the Ink client
renders it in the "Voice mode enabled" block (older gateways omit
the field — no hint, no crash).
- Desktop: the renderer voice loop never touches tools/voice_mode.py,
so the phrase is read from config (voice.stop_phrases → $voiceStopPhrase
store, seeded in use-hermes-config) and shown as an info toast when a
voice conversation starts. i18n: en/ja/zh/zh-hant/ar.
The continuous-voice no-speech counter (3 strikes -> voice off) counted
every silent capture cycle unconditionally. During a long agent turn
(thinking/tool-calling for minutes) or while TTS is speaking, the user
is CORRECTLY silent — those cycles ended the voice chat under them.
- hermes_cli/voice.py: new set_voice_busy_probe() seam + _voice_activity_held()
(TTS-playing via the existing _tts_playing Event, agent-busy via the
registered probe). Both the continuous-loop strike path and the
force-transcribe single-shot strike path skip counting while held.
Fail-open: a broken probe counts cycles as before.
- tui_gateway/server.py: registers _any_session_running() as the probe
on voice.record start (voice is process-global; any running session holds).
- cli.py: classic CLI strike path skips counting while _agent_running
or TTS playback is in flight.
Stop phrase and barge-in still work during the hold (own paths).
Includes a fixture fix for the #71083 cherry-pick: the fake tools.tts_tool
module needs _load_tts_config (main's tts_streaming imports it).
Replace one-shot VAD calibration with a rolling deque window that
continuously recalibrates the noise floor throughout TTS playback,
preventing false barge-in triggers from stale calibration. Add a
grace period before VAD activates so TTS playback establishes first.
Suppress duplicate text rendering when token streaming is enabled.
Mirror the barge-in and TTS stream stop logic to the TUI gateway path
so both CLI and gateway use the same VAD semantics.
Rolling-window VAD:
- 90th percentile of rolling window (~3s) for noise floor
- 8x multiplier (was 5x) for TTS volume variation headroom
- 4000 RMS trigger ceiling so genuine speech can still trip
- min_floor clamped to SILENCE_RMS_THRESHOLD * 2
- sustained_ms=1000, calibration_ms=800
Barge-in grace period (barge_in_grace_seconds, default 2.0s):
Delays VAD activation so TTS playback establishes before the mic opens.
Duplicate render suppression:
When streaming_enabled, pass display_callback=None to
stream_tts_to_speaker so the token stream is the sole display path.
TUI gateway mirror:
Mirror _tts_stream_stop and _tts_stream_barge_in_monitor changes to
tui_gateway/server.py so both code paths use the same VAD parameters,
grace period, and TTS CUT diagnostic logging.
Profile-scoped session DB and MoA progress events in tui_gateway/server.py
were necessitated by the TTS pipeline changes affecting session state
and event routing.
Normal-exit flag and TTS CUT diagnostic logging at all cut paths.
Regression tests:
- test_quiet_then_loud_playback_does_not_trip
- test_8x_multiplier_absorbs_tts_volume_spikes
- test_trigger_ceiling_lets_genuine_speech_trip
- test_silence_calibration_does_not_false_trip_on_tts
- test_tts_stream_stop_latches_interruption_for_next_turn
- test_tts_stream_stop_after_natural_finish_does_not_latch
- Profile-scoped session DB tests (10 tests)
Saying OR typing a configured stop phrase (voice.stop_phrases, default
"stop") now ends the voice chat everywhere, not just classic CLI PTT:
- hermes_cli/voice.py: new explicit on_stop_phrase callback through
start_continuous/stop_continuous. The force-transcribe path previously
DISCARDED the stop phrase silently — with auto_restart=False the client
re-arms the next capture, so the conversation never ended. Both halt
paths now fire on_stop_phrase (fallback: on_silent_limit for legacy
callers) as user intent, distinct from the no-speech timeout.
- tui_gateway/server.py: voice.record wires on_stop_phrase and emits
voice.transcript {stop_phrase: true} after flipping HERMES_VOICE(_TTS)
off and stopping streaming TTS — same teardown as /voice off. The TTS
barge-in monitor stop-checks its transcript too. prompt.submit consumes
a TYPED bare stop phrase at the server-side choke point when voice mode
is on (returns {voice_stopped: true}, no turn starts).
- ui-tui: voice.transcript {stop_phrase} ends voice mode with a clear
'voice chat ended' notice (distinct from the no-speech-limit message);
submitPrompt releases the busy latch on a consumed voice_stopped reply.
- cli.py: _typed_voice_stop in process_loop — typing a bare stop phrase
while voice mode/continuous is active ends voice mode instead of
sending 'stop' to the agent; typed 'stop' outside voice mode is
unchanged. Voice transcripts skip the check (already stop-checked).
- desktop: interceptsTypedVoiceStop — the composer's onSubmit ends the
live voice conversation (same path as clicking end on the pill) when a
bare stop command is typed with no attachments; renderer-owned loop, so
handled client-side like the existing spoken isVoiceStopCommand.
- tools/voice_mode.py: transcribe_recording never lets the Whisper
hallucination filter swallow a configured stop phrase (e.g. 'bye'
configured as a stop phrase is both a hallucination-blocklist entry and
a stop phrase — stop-phrase check now wins).
Tests: continuous-loop signal (sabotage-verified), force-transcribe stop
signal + legacy fallback, hallucination-filter ordering, typed-stop CLI
unit tests (voice on/off/longer text), prompt.submit typed-stop gateway
tests, TUI vitest for stop_phrase event handling, desktop vitest for the
typed-stop interceptor.
Streamed response text carried a 4-space _STREAM_PAD indent and the
final-response Rich Panel used padding=(1, 4), so every line selected
out of the terminal came with leading whitespace. Both now render
flush-left (pad empty, panel padding=(1, 0)); the table-realignment
width budgets were widened to match.
/copy now writes the ORIGINAL message text through native clipboard
tools (pbcopy / PowerShell Set-Clipboard via base64 / wl-copy / xclip /
xsel — same fallback chain as the TUI's writeClipboardText), falling
back to OSC 52 only when no native backend succeeds. This is the
TUI-equivalent answer to soft-wrap mangling: the clipboard gets the raw
text, not the rendered layout.
Port from openai/codex#34540 / #34612 ("detach non-interactive
subprocesses from stdin"): internal git invocations that run with nobody
attached — MCP catalog installs, plugin install/update, profile
distribution staging, worktree base fetches, and the desktop review
pane's git/gh backend — could hang on a credential prompt when a remote
is private, misconfigured, or requires auth. git prompts on the
inherited terminal (or via Git Credential Manager on Windows), so the
operation silently waits until its timeout, or forever at sites without
one (mcp_catalog clones have no timeout at all and inherit the parent
terminal).
- Add noninteractive_git_env() to hermes_cli/_subprocess_compat.py:
GIT_TERMINAL_PROMPT=0 + GCM_INTERACTIVE=Never on a copy of the
environment; GIT_ASKPASS/SSH_ASKPASS deliberately preserved so
working non-interactive auth still succeeds.
- Wire it + stdin=DEVNULL into: mcp_catalog._do_git_install (clone/
checkout), plugins_cmd (clone + pull), profile_distribution._git_clone,
web_git._git/_gh (gh also gets GH_PROMPT_DISABLED=1), and cli.py's
worktree base fetch helper.
- Tests: env contract, a real-git E2E against a local 401 Basic-auth
HTTP server proving fail-fast ("terminal prompts disabled") instead
of a hang, and per-call-site plumbing assertions. Sabotage-verified:
removing the env from web_git._git fails the site test.
Two in-house micro-fixes from issue triage:
- #49883: voice.beep_enabled gates in cli.py and hermes_cli/voice.py used
bool() on the config value, so a quoted YAML string like "false" or
"off" kept beeps on. Route through utils.is_truthy_value.
- #18432: AudioRecorder.start() collapsed OSError from _import_audio into
the 'pip install sounddevice numpy' hint — but OSError means the
PortAudio SHARED LIBRARY is missing, which pip cannot fix. Mirror
detect_audio_environment's system-package hint (libportaudio2 /
brew portaudio / Termux pkg install portaudio) on that path.
Fixes#49883Fixes#18432
Typed messages sent while voice mode was active were also getting the
'[Voice input — respond concisely...]' API-local prefix, because the gate
checked only self._voice_mode. Route STT transcripts through a
_VoiceInputMessage sentinel in _pending_input (both the PTT/continuous
transcription path and the barge-in utterance path), unwrap it in
process_loop, and thread voice_input= through chat() so the prefix applies
only to genuinely voice-transcribed messages.
Re-cut of PR #65961 (@webtecnica) — the original diff had the sentinel
class embedded inside __init__'s docstring. Credit also to the earliest
route-by-origin attempt in PR #11744 (@KeroZelvin).
Fixes#65827Closes#65961Closes#11744
Review follow-up: the sweeper is right that the first commit only cured
half the dead config — the TUI gateway builds its recorder params
explicitly, so the cap never reached recordings started from the TUI.
- start_continuous() grows a max_recording_seconds param (default 0.0 =
disabled, so existing callers keep today's behaviour) and applies it to
the shared recorder next to the silence params
- tui_gateway voice.record start forwards the validated cap; corruption
semantics now mirror the silence params everywhere: non-numeric/bool
falls back to the documented 120 default (a hand-edited
`max_recording_seconds: true` must not become a 1-second cap), while
an explicit numeric <= 0 disables the cap
- cli.py wiring updated to the same corruption semantics
New coverage, per review:
- TestMaxRecordingCap drives the mocked InputStream callback past the
cap during continuous loud speech (the silence branch physically can't
fire there) and asserts the one-shot callback fires exactly once; plus
the disabled-cap negative
- TestMaxRecordingSecondsConfigReal pins the CLI config assignment for
the valid / zero / bool / garbage cases via _voice_start_recording
- test_voice_record_start_forwards_max_recording_seconds pins the TUI
forwarding for the same matrix
When voice continuous mode detects 3 consecutive no-speech cycles it sets
_voice_continuous = False and previously did an immediate
eturn. The
restart guard if self._voice_continuous and not submitted and not
self._voice_recording came *after* the early return, so the thread could
never restart. However a timing window existed: if _voice_start_recording was
already queued from a prior iteration, the
eturn bypassed the guard while
the thread was already in flight.
Replace the bare
eturn with a stop_continuous_restart boolean evaluated
in the same if that guards _restart_recording. This ensures both branches
read a consistent no-restart signal and no recording thread is spawned after
the user's session has been intentionally halted.
In continuous voice mode, pressing the record hotkey (Ctrl+B) was a
silent no-op while the agent was running or voice was being transcribed.
The hotkey only cleared _voice_continuous when _voice_recording was True,
leaving the user trapped in an auto-restart loop that only /voice off
could break.
Fix: when the agent is running or transcribing, still allow the hotkey
to clear _voice_continuous so the loop stops after the current turn.
Consolidates all TTS text-preparation paths onto
tools/tts_text_normalize.prepare_spoken_text:
- strip_nonspoken_blocks: removes <think> reasoning blocks (#34213,
incl. unterminated streaming blocks) and the end-of-turn
file-mutation verifier footer emitted by run_agent.py (#40772).
- flatten_newlines_for_payload: collapses newlines into sentence
breaks so newline-sensitive OpenAI-compatible providers (Kokoro)
speak the whole script instead of truncating at the first newline
(#9004).
- tools/tts_tool._strip_markdown_for_tts (voice-mode streaming + web
dashboard path) now delegates to the shared cleaner, with the legacy
regex pipeline kept as a best-effort fallback.
- hermes_cli/voice.py speak_text and cli.py _voice_speak_response now
use the shared cleaner instead of their own duplicated regex
pipelines.
- gateway auto-TTS fallback also strips think blocks.
Tests: tests/tools/test_tts_prepare_spoken.py covers think blocks,
verifier footer, emoji, newline flattening, and the shared-cleaner
wiring on the tool/streaming/gateway paths. Updated the header
expectation in test_voice_cli_integration.py for the heading-fold
behavior of the shared cleaner.
Closes#34213, #9004, #40772
The wake-word ear reverted to disabled after every restart even when
closed enabled. Root cause is general, not wake-specific: save_config_value
followed load_cli_config's precedence, which falls back to the repo's
checked-in cli-config.yaml when HERMES_HOME/config.yaml doesn't exist yet.
On such installs (managed/desktop first launch), the toggle's persist wrote
wake_word.enabled=true into cli-config.yaml and returned success — but
every config reader (load_config -> get_hermes_home()/config.yaml,
including load_wake_word_config) reads only HERMES_HOME/config.yaml, so the
setting was invisible on the next launch. Same silent loss hit any runtime
persist (model switch, /reasoning, /fast, skin) on a config-less install.
save_config_value now always targets get_hermes_home()/config.yaml,
creating it if absent, and never writes the shipped repo template. Also
resolves HERMES_HOME live instead of the import-time _hermes_home constant
(profile-safe).
E2E verified: persist -> fresh module reload -> load_wake_word_config sees
enabled=true and wake_surface_enabled('gui') is True, for both a fresh
(no config.yaml) and an existing-config install.
- cli.py save_config_value: target user config, create if absent
- tests: 2 regression tests (creates user config when absent; never writes
repo cli-config.yaml); fixture now sets HERMES_HOME. 11 file + 206
adjacent config/model-switch tests green
Internal testing (macOS): clicking the ear froze the button for ~30s,
then it went blue but 'hey hermes' never fired even though STT worked.
Two distinct bugs:
1. Frozen-then-timeout button: first-use wake.start lazy-installs the
detection engine (onnxruntime is a large wheel), which blows the
desktop's default 30s WS request timeout — the RPC 'failed' client-
side while the backend kept installing and armed later on its own.
wake.start now gets a 180s budget and the pending state says
'arming — first use may take a minute while the engine installs'
instead of a silent disabled button.
2. Armed but deaf: macOS grants mic permission per PROCESS. The
renderer having mic access (STT working) does not grant the Python
backend anything — CoreAudio hands an unentitled process a 'working'
stream that delivers zeros forever, so the listener looks healthy
and can never hear the phrase. The detector now tracks frame peaks:
10s of consecutive near-zero frames sets audio_silent, logged with
the exact macOS Settings path, cleared automatically when audio
appears. Surfaced everywhere: wake.status (audio_silent + hint),
desktop ear tooltip (kept visible while listening), /wake status on
TUI (⚠ line) and classic CLI, plus a docs troubleshooting section.
Tests: detector silent-flag set/recover cycle (fake silent/loud
streams), desktop tooltip keeps the dead-mic hint while listening.
44 wake Python tests, 22 desktop + 14 TUI vitest green.
check_wake_word_requirements() gated 'available' on the audio probe,
but the probe imports sounddevice + numpy — two of the packages the
lazy installer would install. On a fresh machine deps_ok was False, so
audio_ok was always False and /wake on printed the manual pip hint and
bailed before the engine constructors' lazy_deps.ensure() could run.
Now the audio probe only runs once deps are installed; with deps
missing and lazy installs allowed (the default), /wake on proceeds and
ensure() installs the pinned engine deps in-process — no restart. The
manual pip hint remains for security.allow_lazy_installs=false, and a
mic hint still blocks when deps are present but no audio device works.
The CLI announces the one-time engine install so the pause is explained.
One sherpa listener now enrolls every wake-enabled profile's phrase
(defaulting to "hey <profile name>") and reports WHICH phrase fired.
wake.detected gains a profile field; the desktop live-switches to the
matching profile (same path as the profile rail), opens a fresh session
there, and starts hands-free voice. The single-profile CLI/TUI print the
hermes -p switch command for foreign-profile phrases instead of
answering as the wrong profile. Opt out per listener with
wake_word.profile_routing: false.
Makes the wake word a tri-surface feature with one configurable owner.
- wake_word.surface ("auto" | "cli" | "tui" | "gui") + shared
wake_surface_enabled() gate consulted by every surface, so exactly one
place owns the listener and the new session it opens.
- tui_gateway: wake.start/stop/pause/resume/status RPCs + a wake.detected
event, sharing one server-side detector for both TUI and desktop. The
detector yields the mic to voice.record (pause on capture start, resume
on terminal) and to the desktop's browser mic (wake.pause/resume).
- TUI (Ink): arm wake.start on gateway.ready; on wake.detected open a
fresh session and start voice capture.
- Desktop (Electron): arm wake.start on connect; on wake.detected open a
fresh session.
- CLI now gates on wake_surface_enabled("cli"); /wake status shows surface.
- Tests for the surface gate; docs cover the surface knob + cross-surface.
Adds an opt-in, on-device hotword listener for the CLI. With
wake_word.enabled (or /wake on), Hermes listens in the background for a
wake phrase; on detection it starts a fresh session, captures one
utterance through the existing voice pipeline, and answers — the
"Hey Siri" pattern.
- tools/wake_word.py: provider-pluggable detector (openWakeWord, free
local default; Porcupine, premium) over the shared 16 kHz sounddevice
capture path. Background daemon thread with pause/resume so it yields
the mic during a voice turn.
- CLI wiring: startup listener (off-thread), on-wake flow, an idle
watchdog that resumes the detector after each turn, cleanup hook, and
a /wake [on|off|status] command.
- config.yaml wake_word section; PORCUPINE_ACCESS_KEY as an optional
secret. Engines lazy-install via the [wake] extra.
- Hands a transcript to the input queue exactly like voice mode, so no
system-prompt/cache mutation. No new core model tool.
- Tests (mocked, no live audio/network) + feature docs.
list_recent_user_messages and the in-memory /retry + session.undo walkers
treated every role=user row as a real user turn. Timeline bookkeeping
(model_switch, async_delegation_complete, auto_continue, hidden) is stored
that way, so /undo soft-deleted from a marker and /retry re-sent opaque
bookkeeping text. Exclude display_kind the same way CLI resume counting and
the prompt.submit ordinal path do.
When an operator changes the global model/provider config, warn that
unpinned cron jobs with stored snapshots will fail-closed on their next
run. Adds a cron.model_drift_guard config opt-out (default true) for
fleets that should deliberately track changing global defaults.
Addresses #59031. Original PR #59177 by @doncazper.
Saying EXACTLY a configured stop phrase (default: 'stop') and nothing
else now ends the voice conversation instead of being sent to the agent
as a prompt. Match is deliberately strict — whole utterance,
case-insensitive, surrounding punctuation stripped — so 'stop doing
that and try X' still reaches the agent.
- tools/voice_mode.py: is_voice_stop_phrase() + voice.stop_phrases
config loader (default ['stop'], [] disables, malformed config falls
back safely).
- hermes_cli/voice.py: shared continuous loop (TUI + desktop) halts on
a stop phrase exactly like the silent-cycle limit (fires
on_silent_limit so every UI turns voice off); stop_continuous
force-transcribe path swallows the phrase without counting a silent
cycle.
- cli.py: classic CLI push-to-talk/continuous path and barge-in
utterance path disable voice mode on a stop phrase.
- Config default voice.stop_phrases: ['stop']; docs updated.
Tests: tests/tools/test_voice_stop_phrase.py (27 tests,
sabotage-verified: loop test fails when detection is disabled);
voice suites green (110 + 44 passed).
Two defects found by manual testing on the branch.
1. ORG SYNC NEVER RAN. The org pull/mirror/gating machinery was fully
implemented and unit-tested but had ZERO runtime callers —
maybe_pull_org_skills() was referenced only inside a comment, and
`hermes sync` had no org path at all. Every code path fell through to
personal sync (refs/user/<sub>/), so org skills never loaded and the
feature looked like 'everything syncs to my personal org' even with a
valid org token. The unit tests could not catch this: they invoked the
functions directly, which is exactly the gap they left open.
- cli.py session startup now calls maybe_pull_org_skills() alongside the
personal maybe_pull_skills(), fail-quiet.
- Auto-pull is gated on real org membership: resolve_org_identity()
requires an org role on the token, only issued for multi-member orgs,
so a solo account never reaches the network.
- `hermes sync pull` refreshes the org mirror too (one pull, both
surfaces) and reports what it refreshed.
- `hermes sync status` exposes org_available/org_id/org_role/org_skills
plus a plain-language summary, so a user can tell whether the org
workflow applies instead of it being invisible.
2. INTERNAL JARGON LEAKED TO USERS. Help text and errors exposed internal
milestone/spec coordinates: 'Propose a skill ... (M2)', 'Personal skill
sync (HSP/1)', 'DEV-PHASE gate closed: your token lacks
tool_gateway_admin', 'contract §4.3', and an inert message describing our
internal personal-vs-multi-member design split. All rewritten in user
language. Feature-local comments/docstrings lost their internal
coordinates (§N, M1/M2, design.md, PR numbers) while keeping the
explanatory prose. Pre-existing issue references elsewhere in the tree
were deliberately left untouched.
Tests: 4 new guards, including two that assert the CALL SITES exist so the
org pull cannot silently become dead code again (verified failing when the
wiring is removed) and one that fails if user-facing help leaks jargon.
344 passed across the sync/skills/prompt suites.
Verified against live staging with a real org token: sync status reports
org_available=true, org_role=OWNER; sync pull performs the org refresh; the
.active_org marker is written with the org id from the token.
Widen the cherry-picked /diff base (#4839 by @SHL0MS) into one
cross-surface implementation, folding in the review feedback and the
best ideas from the two sibling PRs (#22703, #53527):
- tools/working_diff.py: shared git collection layer — unstaged
(default), staged, and all (vs HEAD) modes; untracked files folded in
via `git diff --no-index` so new files appear as additions (Codex
/diff parity); shlex-split arguments preserve quoted paths.
- CLI: handler moved to hermes_cli/cli_commands_mixin.py per the
current god-file decomposition (dispatch stays in cli.py), renders
through the rich console with a 400-line terminal-flood guard.
- Gateway: _handle_diff_command in gateway/slash_commands.py + dispatch
in gateway/run.py; fenced ```diff output truncated to 60 lines /
3000 chars before the platform senders apply their own per-platform
message clamps (tool-progress-style layered truncation). Localized
strings in all 17 locale catalogs.
- /diff session (from #53527): cumulative checkpoint-baseline diff of
everything Hermes changed, via new CheckpointManager.session_diff();
docstring records the retained-baseline approximation caveat from
review. Works on both surfaces; degrades with an actionable message
when checkpoints are off.
- Slack: /diff routed via /hermes diff (50-slash cap; keeps
telegram-parity test green and /version native).
- Registry: cross-surface CommandDef with staged|all|session
subcommands; docs: slash-commands reference (CLI + gateway tables +
both-surfaces list) and hermes-agent skill reference.
- Tests: tests/tools/test_working_diff.py (real git repos),
tests/hermes_cli/test_diff_command.py (real git + stubbed checkpoint
manager), tests/gateway/test_diff_command.py (end-to-end handler,
real checkpoint store), TestSessionDiff in
tests/tools/test_checkpoint_manager.py.
Salvaged from the /diff PR cluster #4839 + #22703 + #53527.
Co-authored-by: Ninso112 <ninso112@proton.me>
Co-authored-by: Harshkamdar67 <harshkamdar67@gmail.com>
Shows staged and unstaged changes in the current working directory.
/diff shows stat summary + full diff, /diff --stat shows summary only.
Uses git diff directly — no checkpoint system required. Works in any
git repository.
Closes#4250
Extends the cherry-picked /context command (PR #52184) and prompt-size
attribution helpers (PR #66656) into one visual context view across
surfaces, and absorbs the per-component budget-visibility goal of the
/tokens proposal (PR #48470):
- agent/context_breakdown.py: pure renderers over the existing payload —
a 5x20 glyph block grid (1 cell ~= 1% of the model window), an
'Estimated usage by category' table with free space, and expanded
per-skill / per-toolset listings via compute_context_details(), which
reuses the prompt-size attribution mechanism (skills index-line bytes +
registry tool->toolset map) converted to the same chars/4 heuristic.
- cli.py: /context [all] renders grid + category table (+ expanded
listings) from the live agent and in-memory conversation history.
- gateway/slash_commands.py: /context appends the plain-text category
table (no grid — monospace not guaranteed on messaging platforms);
/context all adds the expanded listings. Fail-open: breakdown errors
never break the gauge.
- hermes_cli/commands.py: /context gains the 'all' subcommand; /version
demoted to /hermes version on Slack to keep the 50-slash cap.
- tests: renderer unit tests against synthetic payloads, registry test,
gateway /context + /context all + failure-degradation handler tests.
- docs: slash-commands reference + CLI guide entries.
Read-only and locally computed: no provider calls, no prompt-cache impact.
Co-authored-by: RemyFevry <29257684+RemyFevry@users.noreply.github.com>
Co-authored-by: joelbrilliant <joelbrilliant1@gmail.com>
Co-authored-by: CharlesMcquade <6466275+CharlesMcquade@users.noreply.github.com>
