The detached bash subprocess spawned by /restart gets killed by
systemd's KillMode=mixed cgroup cleanup, leaving the gateway dead.
Under systemd (detected via INVOCATION_ID env var), /restart now uses
via_service=True which exits with code 75 — RestartForceExitStatus=75
in the unit file makes systemd auto-restart the service. The detached
subprocess approach is preserved as fallback for non-systemd
environments (Docker, tmux, foreground mode).
When a user sends /restart, the gateway now persists their routing info
(platform, chat_id, thread_id) to .restart_notify.json. After the new
gateway process starts and adapters connect, it reads the file, sends a
'Gateway restarted successfully' message to that specific chat, and
cleans up the file.
This follows the same pattern as _send_update_notification (used by
/update). Thread IDs are preserved so the notification lands in the
correct Telegram topic or Discord thread.
Previously, after /restart the user had no feedback that the gateway was
back — they had to send a message to find out. Now they get a proactive
notification and know their session continues.
When tool_preview_length is 0 (default for platforms without a tier
default, like Session), verbose mode was truncating args JSON to 200
characters. Since the user explicitly opted into verbose mode, they
expect full tool call detail — the 200-char cap defeated the purpose.
Now: tool_preview_length=0 means no truncation in verbose mode.
Positive values still cap as before. Platform message-length limits
handle overflow naturally.
Three changes that address the poor WhatsApp experience reported by users:
1. Reclassify WhatsApp from TIER_LOW to TIER_MEDIUM in display_config.py
— enables streaming and tool progress via the existing Baileys /edit
bridge endpoint. Users now see progressive responses instead of
minutes of silence followed by a wall of text.
2. Lower MAX_MESSAGE_LENGTH from 65536 to 4096 and add proper chunking
— send() now calls format_message() and truncate_message() before
sending, then loops through chunks with a small delay between them.
The base class truncate_message() already handles code block boundary
detection (closes/reopens fences at chunk boundaries). reply_to is
only set on the first chunk.
3. Override format_message() with WhatsApp-specific markdown conversion
— converts **bold** to *bold*, ~~strike~~ to ~strike~, headers to
bold text, and [links](url) to text (url). Code blocks and inline
code are protected from conversion via placeholder substitution.
Together these fix the two user complaints:
- 'sends the whole code all the time' → now chunked at 4K with proper
formatting
- 'terminal gets interrupted and gets cooked' → streaming + tool progress
give visual feedback so users don't accidentally interrupt with
follow-up messages
Port from nearai/ironclaw#2304: Telegram's 4096 character limit is
measured in UTF-16 code units, not Unicode codepoints. Characters
outside the Basic Multilingual Plane (emoji like 😀, CJK Extension B,
musical symbols) are surrogate pairs: 1 Python char but 2 UTF-16 units.
Previously, truncate_message() used Python's len() which counts
codepoints. This could produce chunks exceeding Telegram's actual limit
when messages contain many astral-plane characters.
Changes:
- Add utf16_len() helper and _prefix_within_utf16_limit() for
UTF-16-aware string measurement and truncation
- Add _custom_unit_to_cp() binary-search helper that maps a custom-unit
budget to the largest safe codepoint slice position
- Update truncate_message() to accept optional len_fn parameter
- Telegram adapter now passes len_fn=utf16_len when splitting messages
- Fix fallback truncation in Telegram error handler to use
_prefix_within_utf16_limit instead of codepoint slicing
- Update send_message_tool.py to use utf16_len for Telegram platform
- Add comprehensive tests: utf16_len, _prefix_within_utf16_limit,
truncate_message with len_fn (emoji splitting, content preservation,
code block handling)
- Update mock lambdas in reply_mode tests to accept **kw for len_fn
Port from openclaw/openclaw#64586: users who copy .env.example without
changing placeholder values now get a clear error at startup instead of
a confusing auth failure from the platform API. Also rejects placeholder
API_SERVER_KEY when binding to a network-accessible address.
Cherry-picked from PR #8677.
Port from openclaw/openclaw#64796: Per MSC3952 / Matrix v1.7, the
m.mentions.user_ids field is the authoritative mention signal. Clients
that populate m.mentions but don't duplicate @bot in the body text
were being silently dropped when MATRIX_REQUIRE_MENTION=true.
Cherry-picked from PR #8673.
Some OpenAI-compatible clients (Open WebUI, LobeChat, etc.) send
message content as an array of typed parts instead of a plain string:
[{"type": "text", "text": "hello"}]
The agent pipeline expects strings, so these array payloads caused
silent failures or empty messages.
Add _normalize_chat_content() with defensive limits (recursion depth,
list size, output length) and apply it to both the Chat Completions
and Responses API endpoints. The Responses path had inline
normalization that only handled input_text/output_text — the shared
function also handles the standard 'text' type.
Salvaged from PR #7980 (ikelvingo) — only the content normalization;
the SSE and Weixin changes in that PR were regressions and are not
included.
Co-authored-by: ikelvingo <ikelvingo@users.noreply.github.com>
Four fixes for the Weixin/WeChat adapter, synthesized from the best
aspects of community PRs #8407, #8521, #8360, #7695, #8308, #8525,
#7531, #8144, #8251.
1. Streaming cursor (▉) stuck permanently — WeChat doesn't support
message editing, so the cursor appended during streaming can never
be removed. Add SUPPORTS_MESSAGE_EDITING = False to WeixinAdapter
and check it in gateway/run.py to use an empty cursor for non-edit
platforms. (Fixes#8307, #8326)
2. Media upload failures — two bugs in _send_file():
a) upload_full_url path used PUT (404 on WeChat CDN); now uses POST.
b) aes_key was base64(raw_bytes) but the iLink API expects
base64(hex_string); images showed as grey boxes. (Fixes#8352, #7529)
Also: unified both upload paths into _upload_ciphertext(), preferring
upload_full_url. Added send_video/send_voice methods and voice_item
media builder for audio/.silk files. Added video_md5 field.
3. Markdown links stripped — WeChat can't render [text](url), so
format_message() now converts them to 'text (url)' plaintext.
Code blocks are preserved. (Fixes#7617)
4. Blank message prevention — three guards:
a) _split_text_for_weixin_delivery('') returns [] not ['']
b) send() filters empty/whitespace chunks before _send_text_chunk
c) _send_message() raises ValueError for empty text as safety net
Community credit: joei4cm (#8407), lyonDan (#8521), SKFDJKLDG (#8360),
tomqiaozc (#7695), joshleeeeee (#8308), luoxiao6645(#8525),
longsizhuo (#7531), Astral-Yang (#8144), QingWei-Li (#8251).
- Remove duplicate _setup_feishu() definition (old 3-line version left
behind by cherry-pick — Python picked the new one but dead code
remained)
- Remove misleading 'Disable direct messages' DM option — the Feishu
adapter has no DM policy mechanism, so 'disable' produced identical
env vars to 'pairing'. Users who chose 'disable' would still see
pairing prompts. Reduced to 3 options: pairing, allow-all, allowlist.
- Fix test_probe_returns_bot_info_on_success and
test_probe_returns_none_on_failure: patch FEISHU_AVAILABLE=True so
probe_bot() takes the SDK path when lark_oapi is not installed
The _watch_update_progress() poll loop never deleted .update_prompt.json
after forwarding the prompt to the user, causing the same prompt to be
re-sent every poll cycle (2s). Two fixes:
1. Delete .update_prompt.json after forwarding — the update process only
polls for .update_response, it doesn't need the prompt file to persist.
2. Guard re-sends with _update_prompt_pending check — belt-and-suspenders
to prevent duplicates even under race conditions.
Add regression test asserting the prompt is sent exactly once.
When the gateway shuts down gracefully (hermes update, gateway restart,
/restart), it now writes a .clean_shutdown marker file. On the next
startup, if this marker exists, suspend_recently_active() is skipped
and the marker is cleaned up.
Previously, suspend_recently_active() fired on EVERY startup —
including planned restarts from hermes update or hermes gateway restart.
This caused users to lose their conversation history unexpectedly: the
session would be marked as suspended, and the next message would
trigger an auto-reset with a notification the user never asked for.
The original purpose of suspend_recently_active() is crash recovery —
preventing stuck sessions that were mid-processing when the gateway
died unexpectedly. Graceful shutdowns already drain active agents via
_drain_active_agents(), so there is no stuck-session risk. After a
crash (no marker written), suspension still fires as before.
Fixes the scenario where a user asks the agent to run hermes update,
the gateway restarts, and the user's next message gets an unwanted
'Session automatically reset' notification with their history cleared.
Add content-aware splitting to compact mode: short chat-like exchanges
(2-6 short lines without headings/lists/quotes) get separate message
bubbles for a natural chat feel, while structured content (tables,
headings with body, numbered lists) stays in a single message.
Cherry-picked from PR #7587 by bravohenry, adapted to the compact/legacy
split_per_line architecture from #7903.
When the agent calls process(action='wait') or process(action='poll')
and gets the exited status, the completion_queue notification is
redundant — the agent already has the output from the tool return.
Previously, the drain loops in CLI and gateway would still inject
the [SYSTEM: Background process completed] message, causing the
agent to receive the same information twice.
Fix: track session IDs in _completion_consumed set when wait/poll/log
returns an exited process. Drain loops in cli.py and gateway watcher
skip completion events for consumed sessions. Watch pattern events
are never suppressed (they have independent semantics).
Adds 4 tests covering wait/poll/log marking and running-process
negative case.
The gateway startup path references RedactingFormatter without
importing it, causing a NameError crash when launched with a
verbosity flag (e.g. via launchd --replace).
Fixes#8044
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds an optional focus topic to /compress: `/compress database schema`
guides the summariser to preserve information related to the focus topic
(60-70% of summary budget) while compressing everything else more aggressively.
Inspired by Claude Code's /compact <focus>.
Changes:
- context_compressor.py: focus_topic parameter on _generate_summary() and
compress(); appends FOCUS TOPIC guidance block to the LLM prompt
- run_agent.py: focus_topic parameter on _compress_context(), passed through
to the compressor
- cli.py: _manual_compress() extracts focus topic from command string,
preserves existing manual_compression_feedback integration (no regression)
- gateway/run.py: _handle_compress_command() extracts focus from event args
and passes through — full gateway parity
- commands.py: args_hint="[focus topic]" on /compress CommandDef
Salvaged from PR #7459 (CLI /compress focus only — /context command deferred).
15 new tests across CLI, compressor, and gateway.
Fixes#7952 — Matrix E2EE completely broken after mautrix migration.
- Replace MemoryCryptoStore + pickle/HMAC persistence with mautrix's
PgCryptoStore backed by SQLite via aiosqlite. Crypto state now
persists reliably across restarts without fragile serialization.
- Add handle_sync() call on initial sync response so to-device events
(queued Megolm key shares) are dispatched to OlmMachine instead of
being silently dropped.
- Add _verify_device_keys_on_server() after loading crypto state.
Detects missing keys (re-uploads), stale keys from migration
(attempts re-upload), and corrupted state (refuses E2EE).
- Add _CryptoStateStore adapter wrapping MemoryStateStore to satisfy
mautrix crypto's StateStore interface (is_encrypted,
get_encryption_info, find_shared_rooms).
- Remove redundant share_keys() call from sync loop — OlmMachine
already handles this via DEVICE_OTK_COUNT event handler.
- Fix datetime vs float TypeError in session.py suspend_recently_active()
that crashed gateway startup.
- Add aiosqlite and asyncpg to [matrix] extra in pyproject.toml.
- Update test mocks for PgCryptoStore/Database and add query_keys mock
for key verification. 174 tests pass.
- Add E2EE upgrade/migration docs to Matrix user guide.
Add display.platforms section to config.yaml for per-platform overrides of
display settings (tool_progress, show_reasoning, streaming, tool_preview_length).
Each platform gets sensible built-in defaults based on capability tier:
- High (telegram, discord): tool_progress=all, streaming follows global
- Medium (slack, mattermost, matrix, feishu): tool_progress=new
- Low (signal, whatsapp, bluebubbles, wecom, etc.): tool_progress=off, streaming=false
- Minimal (email, sms, webhook, homeassistant): tool_progress=off, streaming=false
Example config:
display:
platforms:
telegram:
tool_progress: all
show_reasoning: true
slack:
tool_progress: off
Resolution order: platform override > global setting > built-in platform default.
Changes:
- New gateway/display_config.py: resolver module with tier-based platform defaults
- gateway/run.py: tool_progress, tool_preview_length, streaming, show_reasoning
all resolve per-platform via the new resolver
- /verbose command: now cycles tool_progress per-platform (saves to
display.platforms.<platform>.tool_progress instead of global)
- /reasoning show|hide: now saves show_reasoning per-platform
- Config version 15 -> 16: migrates tool_progress_overrides into display.platforms
- Backward compat: legacy tool_progress_overrides still read as fallback
- 27 new tests for resolver, normalization, migration, backward compat
- Updated verbose command tests for per-platform behavior
Addresses community request for per-channel verbosity control (Guillaume Meyer,
Nathan Danielsen) — high verbosity on backchannel Telegram, low on customer-facing
Slack, none on email.
Add display.interim_assistant_messages config (enabled by default) that
forwards completed assistant commentary between tool calls to the user
as separate chat messages. Models already emit useful status text like
'I'll inspect the repo first.' — this surfaces it on Telegram, Discord,
and other messaging platforms instead of swallowing it.
Independent from tool_progress and gateway streaming. Disabled for
webhooks. Uses GatewayStreamConsumer when available, falls back to
direct adapter send. Tracks response_previewed to prevent double-delivery
when interim message matches the final response.
Also fixes: cursor not stripped from fallback prefix in stream consumer
(affected continuation calculation on no-edit platforms like Signal).
Cherry-picked from PR #7885 by asheriif, default changed to enabled.
Fixes#5016
Complete the contextvars migration by adding HERMES_SESSION_KEY to the
unified _VAR_MAP in session_context.py. Without this, concurrent gateway
handlers race on os.environ["HERMES_SESSION_KEY"].
- Add _SESSION_KEY ContextVar to _VAR_MAP, set_session_vars(), clear_session_vars()
- Wire session_key through _set_session_env() from SessionContext
- Replace os.getenv fallback in tools/approval.py with get_session_env()
(function-level import to avoid cross-layer coupling)
- Keep os.environ set as CLI/cron fallback
Cherry-picked from PR #7878 by 0xbyt4.
Add a second WeCom integration mode for regular enterprise self-built
applications. Unlike the existing bot/websocket adapter (wecom.py),
this handles WeCom's standard callback flow: WeCom POSTs encrypted XML
to an HTTP endpoint, the adapter decrypts, queues for the agent, and
immediately acknowledges. The agent's reply is delivered proactively
via the message/send API.
Key design choice: always acknowledge immediately and use proactive
send — agent sessions take 3-30 minutes, so the 5-second inline reply
window is never useful. The original PR's Future/pending-reply
machinery was removed in favour of this simpler architecture.
Features:
- AES-CBC encrypt/decrypt (BizMsgCrypt-compatible)
- Multi-app routing scoped by corp_id:user_id
- Legacy bare user_id fallback for backward compat
- Access-token management with auto-refresh
- WECOM_CALLBACK_* env var overrides
- Port-in-use pre-check before binding
- Health endpoint at /health
Salvaged from PR #7774 by @chqchshj. Simplified by removing the
inline reply Future system and fixing: secrets.choice for nonce
generation, immediate plain-text acknowledgment (not encrypted XML
containing 'success'), and initial token refresh error handling.
The startup guard tests called connect() which bound a real aiohttp
server on port 8080 — flaky in any environment where the port is
in use. Mock AppRunner, TCPSite, and ClientSession instead.
When sending multi-chunk responses, individual chunks can fail due to
transient iLink API errors. Previously a single failure would abort the
entire message. Now each chunk is retried with linear backoff before
giving up, and the same client_id is reused across retries for
server-side deduplication.
Configurable via config.yaml (platforms.weixin.extra) or env vars:
- send_chunk_delay_seconds (default 0.35s) — pacing between chunks
- send_chunk_retries (default 2) — max retry attempts per chunk
- send_chunk_retry_delay_seconds (default 1.0s) — base retry delay
Replaces the hardcoded 0.3s inter-chunk delay from #7903.
Salvaged from PR #7899 by @corazzione. Fixes#7836.
Background process watchers (notify_on_complete, check_interval) created
synthetic SessionSource objects without user_id/user_name. While the
internal=True bypass (1d8d4f28) prevented false pairing for agent-
generated notifications, the missing identity caused:
- Garbage entries in pairing rate limiters (discord:None, telegram:None)
- 'User None' in approval messages and logs
- No user identity available for future code paths that need it
Additionally, platform messages arriving without from_user (Telegram
service messages, channel forwards, anonymous admin actions) could still
trigger false pairing because they are not internal events.
Fix:
1. Propagate user_id/user_name through the full watcher chain:
session_context.py → gateway/run.py → terminal_tool.py →
process_registry.py (including checkpoint persistence/recovery)
2. Add None user_id guard in _handle_message() — silently drop
non-internal messages with no user identity instead of triggering
the pairing flow.
Salvaged from PRs #7664 (kagura-agent, ContextVar approach),
#6540 (MestreY0d4-Uninter, tests), and #7709 (guang384, None guard).
Closes#6341, #6485, #7643
Relates to #6516, #7392
The Weixin adapter was splitting responses at every top-level newline,
causing notification spam (up to 70 API calls for a single long markdown
response). This salvages the best aspects of six contributor PRs:
Compact mode (new default):
- Messages under the 4000-char limit stay as a single bubble even with
multiple lines, paragraphs, and code blocks
- Only oversized messages get split at logical markdown boundaries
- Inter-chunk delay (0.3s) between chunks prevents WeChat rate-limit drops
Legacy mode (opt-in):
- Set split_multiline_messages: true in platforms.weixin.extra config
- Or set WEIXIN_SPLIT_MULTILINE_MESSAGES=true env var
- Restores the old per-line splitting behavior
Salvaged from PRs #7797 (guantoubaozi), #7792 (luoxiao6645),
#7838 (qyx596), #7825 (weedge), #7784 (sherunlock03), #7773 (JnyRoad).
Core fix unanimous across all six; config toggle from #7838; inter-chunk
delay from #7825.
Matrix gateway: fix sync loop never dispatching events (#5819)
- _sync_loop() called client.sync() but never called handle_sync()
to dispatch events to registered callbacks — _on_room_message was
registered but never fired for new messages
- Store next_batch token from initial sync and pass as since= to
subsequent incremental syncs (was doing full initial sync every time)
- 17 comments, confirmed by multiple users on matrix.org
Feishu docs: add interactive card configuration for approvals (#6893)
- Error 200340 is a Feishu Developer Console configuration issue,
not a code bug — users need to enable Interactive Card capability
and configure Card Request URL
- Added required 3-step setup instructions to feishu.md
- Added troubleshooting entry for error 200340
- 17 comments from Feishu users
Copilot provider drift: detect GPT-5.x Responses API requirement (#3388)
- GPT-5.x models are rejected on /v1/chat/completions by both OpenAI
and OpenRouter (unsupported_api_for_model error)
- Added _model_requires_responses_api() to detect models needing
Responses API regardless of provider
- Applied in __init__ (covers OpenRouter primary users) and in
_try_activate_fallback() (covers Copilot->OpenRouter drift)
- Fixed stale comment claiming gateway creates fresh agents per message
(it caches them via _agent_cache since the caching was added)
- 7 comments, reported on Copilot+Telegram gateway
* fix(matrix): pass required args to MemoryCryptoStore for mautrix ≥0.21
MemoryCryptoStore.__init__() now requires account_id and pickle_key
positional arguments as of mautrix 0.21. The migration from matrix-nio
(commit 1850747) didn't account for this, causing E2EE initialization
to fail with:
MemoryCryptoStore.__init__() missing 2 required positional arguments:
'account_id' and 'pickle_key'
Pass self._user_id as account_id and derive pickle_key from the same
user_id:device_id pair already used for the on-disk HMAC signature.
Update the test stub to accept the new parameters.
Fixes#7803
* fix: use consistent fallback for pickle_key derivation
Address review: _pickle_key now uses _acct_id (which has the 'hermes'
fallback) instead of raw self._user_id, so both values stay consistent
when user_id is empty.
---------
Co-authored-by: Hermes Agent <hermes@nousresearch.com>
* fix: circuit breaker stops CPU-burning restart loops on persistent errors
When a gateway session hits a non-retryable error (e.g. invalid model
ID → HTTP 400), the agent fails and returns. But if the session keeps
receiving messages (or something periodically recreates agents), each
attempt spawns a new AIAgent — reinitializing MCP server connections,
burning CPU — only to hit the same 400 error again. On a 4-core server,
this pegs an entire core per stuck session and accumulates 300+ minutes
of CPU time over hours.
Fix: add a per-session consecutive failure counter in the gateway runner.
- Track consecutive non-retryable failures per session key
- After 3 consecutive failures (_MAX_CONSECUTIVE_FAILURES), block
further agent creation for that session and notify the user:
'⚠️ This session has failed N times in a row with a non-retryable
error. Use /reset to start a new session.'
- Evict the cached agent when the circuit breaker engages to prevent
stale state from accumulating
- Reset the counter on successful agent runs
- Clear the counter on /reset and /new so users can recover
- Uses getattr() pattern so bare GatewayRunner instances (common in
tests using object.__new__) don't crash
Tests:
- 8 new tests in test_circuit_breaker.py covering counter behavior,
threshold, reset, session isolation, and bare-runner safety
Addresses #7130.
* Revert "fix: circuit breaker stops CPU-burning restart loops on persistent errors"
This reverts commit d848ea7109.
* fix: don't evict cached agent on failed runs — prevents MCP restart loop
When a run fails (e.g. invalid model ID → 400) and fallback activated,
the gateway was evicting the cached agent to 'retry primary next time.'
But evicting a failed agent forces a full AIAgent recreation on the next
message — reinitializing MCP server connections, spawning stdio
processes — only to hit the same 400 again. This created a CPU-burning
loop (91%+ for hours, #7130).
The fix: add `and not _run_failed` to the fallback-eviction check.
Failed runs keep the cached agent. The next message reuses it (no MCP
reinit), hits the same error, returns it to the user quickly. The user
can /reset or /model to fix their config.
Successful fallback runs still evict as before so the next message
retries the primary model.
Addresses #7130.
Follow-up fixes for the matrix-nio → mautrix migration:
1. Module-level mautrix.types import now wrapped in try/except with
proper stub classes. Without this, importing gateway.platforms.matrix
crashes the entire gateway when mautrix isn't installed — even for
users who don't use Matrix. The stubs mirror mautrix's real attribute
names so tests that exercise adapter methods (send, reactions, etc.)
work without the real SDK.
2. Removed _ensure_mautrix_mock() from test_matrix_mention.py — it
permanently installed MagicMock modules in sys.modules via setdefault(),
polluting later tests in the suite. No longer needed since the module
imports cleanly without mautrix.
3. Fixed thread persistence tests to use direct class reference in
monkeypatch.setattr() instead of string-based paths, which broke
when the module was reimported by other tests.
4. Moved the module-importability test to a subprocess to prevent it
from polluting sys.modules (reimporting creates a second module object
with different __dict__, breaking patch.object in subsequent tests).
Tool progress markers (e.g. `⏰ list`) were injected directly into
SSE delta.content chunks. OpenAI-compatible frontends (Open WebUI,
LobeChat, etc.) store delta.content verbatim as the assistant message
and send it back on subsequent requests. After enough turns, the model
learns to emit these markers as plain text instead of issuing real tool
calls — silently hallucinating tool results without ever running them.
Fix: Send tool progress as a custom `event: hermes.tool.progress` SSE
event instead of mixing it into delta.content. Per the SSE spec, clients
that don't understand a custom event type silently ignore it, so this is
backward-compatible. Frontends that want to render progress indicators
can listen for the custom event without persisting it to conversation
history.
The /v1/runs endpoint already uses structured events — this aligns the
/v1/chat/completions streaming path with the same principle.
Closes#6972
When two gateway messages arrived concurrently, _set_session_env wrote
HERMES_SESSION_PLATFORM/CHAT_ID/CHAT_NAME/THREAD_ID into the process-global
os.environ. Because asyncio tasks share the same process, Message B would
overwrite Message A's values mid-flight, causing background-task notifications
and tool calls to route to the wrong thread/chat.
Replace os.environ with Python's contextvars.ContextVar. Each asyncio task
(and any run_in_executor thread it spawns) gets its own copy, so concurrent
messages never interfere.
Changes:
- New gateway/session_context.py with ContextVar definitions, set/clear/get
helpers, and os.environ fallback for CLI/cron/test backward compatibility
- gateway/run.py: _set_session_env returns reset tokens, _clear_session_env
accepts them for proper cleanup in finally blocks
- All tool consumers updated: cronjob_tools, send_message_tool, skills_tool,
terminal_tool (both notify_on_complete AND check_interval blocks), tts_tool,
agent/skill_utils, agent/prompt_builder
- Tests updated for new contextvar-based API
Fixes#7358
Co-authored-by: teknium1 <127238744+teknium1@users.noreply.github.com>
Add is_network_accessible() helper using Python's ipaddress module to
robustly classify bind addresses (IPv4/IPv6 loopback, wildcards,
mapped addresses, hostname resolution with DNS-failure-fails-closed).
The API server connect() now refuses to start when the bind address is
network-accessible and no API_SERVER_KEY is set, preventing RCE from
other machines on the network.
Co-authored-by: entropidelic <entropidelic@users.noreply.github.com>
When enabled, @mentioning the bot in a DM creates a thread (default:
false). Supports both env var and YAML config (matrix.dm_mention_threads).
6 new tests, docs updated.
From #6957
