The banner update-check ran an unscoped 'git fetch origin', transferring
all ~1,400 remote heads (measured 3.0s dry-run vs 0.55s scoped, and up to
70s on a cold ref store) and frequently burning its full 10s timeout on
slow links. cmd_update already scopes its fetch for exactly this reason.
A scoped 'git fetch origin main' updates both the origin/main tracking
ref (full-clone count path) and FETCH_HEAD (shallow compare path), so
behind-count semantics are unchanged — verified empirically on a full
clone (rewound tracking ref restored to tip, count correct) and a
--depth 1 shallow clone (FETCH_HEAD updated, boundary preserved).
Replaces the half-duplex per-playback barge monitors with ONE listener
that runs for the entire agent turn in continuous voice mode: armed at
utterance-submit, disarmed when the turn is fully done (response + TTS
finished). Fixes Teknium's live report that voice interruption never
works: (a) not while the LLM is generating, (b) not while TTS plays.
Root causes:
- HALF-DUPLEX GAP: the barge monitor only spawned when TTS playback
STARTED (cli.py streaming/whole-file paths, gateway _tts_stream_begin).
During LLM generation there was NO microphone listener at all.
- PLAYBACK DEAFNESS: the monitor calibrated its VAD noise floor WHILE the
speaker was blasting TTS (speaker bleed baked into the floor), then
multiplied it by 8x with a 1s strictly-consecutive block requirement —
normal speech could rarely reach the trigger, and the 2s grace
swallowed early interjections.
New model — tools/voice_mode.full_duplex_listen():
- Pre-playback calibration: quiet-room noise floor established at turn
start and HELD through playback (never recalibrated against bleed).
- Phase-aware trigger: generation = floor x voice.barge_in_threshold_multiplier
(new config, default 3.0, justified by synthetic-frame tests);
playback = additionally clamped to a 1500-RMS minimum so bleed alone
can't trip; 4000-RMS ceiling keeps speech always reachable.
- Windowed-majority detection (>=80% of a 300ms window) instead of the
strictly-consecutive counter that reset on intra-word energy dips.
- Grace on playback ONSET only (voice.barge_in_grace_seconds, default
down 2.0 -> 0.5) — suppresses the onset transient, not the mic.
- Debug diagnostics at every decision point (calibrated floor, per-window
RMS above 50% of trigger, trip/no-trip, grace suppressions) — always
logger.debug, mirrored to stderr under HERMES_VOICE_DEBUG=1.
Phase behavior (CLI cli.py + tui_gateway/server.py, same model):
- generation: speech interrupts the in-flight turn via the SAME seam the
typed/Ctrl+C interrupt uses (agent.interrupt()), cuts any pending TTS
pipeline so the stale reply never plays, and submits the captured
interjection (pre-roll capture, first syllable kept) as the next turn.
- playback: cuts TTS (streaming pipeline stop + fallback speak stop
events + file player) and submits the capture.
- stop phrase honored in BOTH phases: mid-generation 'stop' interrupts
the turn AND ends the voice chat (stop everything).
- one listener instance spans generation -> playback (no re-arm race);
double-arm refused (CLI _voice_fd_active / gateway _fd_listener_active).
Gateway specifics: _arm_full_duplex_listener() at _run_prompt_submit turn
start and inside _tts_stream_begin; _speak_text_with_barge registers its
(stop, done) pair in _fd_speak_pipelines so fallback speaks are cut and
tracked; _tts_stream_barge_in_monitor kept as a shim that arms the new
listener. Desktop renderer owns its own mic path (voice-barge-in.ts) and
is unaffected; if desktop backend-mic mode is used it inherits via the
gateway.
Tests: full_duplex_listen synthetic-RMS suite (speech-over-bleed trips,
bleed alone doesn't, quiet floor held through playback, grace window,
multiplier math 3x vs 8x, windowed-majority dips), CLI listener phase
tests (generation interrupt seam, playback cut, lifecycle spans phases,
double-arm, config forwarding, stop-phrase-mid-generation), gateway
generation-phase interrupt + stop-phrase tests. Generation-interrupt
test sabotage-verified.
tools/computer_use/tool.py keeps the CLI approval flow in module-globals:
_approval_callback plus the per-session unlock stores _always_allow /
_session_auto_approve. Any test that installs a callback (or drives CLI
init far enough that the real one is registered) and does not reset it
poisons every later computer-use test in the same process:
* a leaked callback that raises — dead UI infra or a stale two-argument
signature (the contract is (action, args, summary)) — becomes
verdict='deny' in _request_approval, so dispatch tests fail with an
empty backend call list;
* a leaked callback that blocks (the real CLI one waits on an answer
queue) hangs a single-process run forever.
Both are order-dependent: tests/tools/test_computer_use.py passes 220/220
in isolation but shows dispatch failures in single-process full-suite runs
(and, with a blocking leak, a permanent hang observed via py-spy inside
_request_approval -> callback -> queue.get with no timeout).
Fix: an autouse teardown-only fixture resets callback + unlock stores
after every test; tests that install their own callback keep it for their
own duration. Regression pair included: a 'forgetful' test leaves a stale
two-arg callback behind, the next test asserts dispatch still routes to
the backend — red without the fixture (1 failed), green with it (225
passed together with the whole computer-use file).
_start_lifecycle_locked reassigns a fresh threading.Event() at line
786, so patching the pre-made instance's wait() is lost and the real
30s wait races pytest-timeout. Patch threading.Event itself with a
FakeEvent whose wait() returns False immediately (#69372).
The upstream cua-driver installer scripts on trycua/cua@main carry a
baked default version that Release Please bumps in the release PR
*before* the release assets are published. During that window an
unpinned installer run 404s on the asset download and the
`hermes update` cua-driver refresh fails with:
error: download failed: The remote server returned an error: (404) Not Found.
⚠ cua-driver refreshing did not complete. Re-run manually: ...
Observed live 2026-07-29: baked version 0.14.0 vs latest published
release 0.13.1 — every `hermes update` run with an out-of-date driver
hit the warning until upstream publishes the assets.
We already know the correct version: `cua-driver check-update --json`
returns `latest_version` straight from the GitHub Releases API, whose
entries by definition have published assets. When the check positively
confirms an update, export that version as CUA_DRIVER_RS_VERSION into
the installer child env (both install.sh and install.ps1 honour it over
their baked default), so the refresh downloads the release that
actually exists instead of racing the upstream release pipeline.
Malformed / missing latest_version values fall back to the previous
unpinned behaviour. The explicit `hermes computer-use install
--upgrade` force path and fresh installs are unchanged.
Streamed responses no longer insert real newlines at terminal width —
logical lines are emitted whole and the terminal soft-wraps them, so
highlight-copy rejoins the full line (emulators only keep linebreaks
the app actually printed). This is the CLI equivalent of the TUI's
selection copy, which reads logical source lines from its screen
buffer. TTFT perception is preserved by mirroring the unfinished
line's tail into the spinner status text instead of chunk-printing.
/copy now prefers OSC 52 when running over SSH (SSH_CONNECTION /
SSH_TTY / SSH_CLIENT) — native tools there write the REMOTE clipboard,
which is never what the user wants. The CLI's OSC 52 writer also gains
tmux/screen DCS passthrough wrapping, mirroring the TUI's
wrapForMultiplexer. Fixes#31528 for the CLI surface.
Sabotage-verified: restoring the old chunk emitter fails 3 of the new
tests (hard-wrap detection, spinner mirror, unbreakable-run split).
Premise check on live main: barge-in machinery EXISTS for the per-turn
STREAMING pipeline only — cli.py chat() arms _voice_barge_in_monitor and
tui_gateway _tts_stream_begin arms _tts_stream_barge_in_monitor. What was
actually broken for spoken interruptions:
1. CLI whole-file fallback (_voice_speak_response_async — used whenever
streaming TTS cannot start: sounddevice missing, requirement probe
fails): NO monitor was ever armed, so talking over the reply did
nothing. Now arms _voice_barge_in_monitor in continuous voice mode.
2. Gateway fallback speak (tts_queue None → speak_text thread) and the
voice.tts RPC (desktop-triggered speech): speak_text ran bare, and
its internal streaming dispatch created a PRIVATE stop event nothing
could reach — uninterruptible even by stop_playback(). New
_speak_text_with_barge() runs the same barge monitor beside the speak
thread; hermes_cli.voice.speak_text/_speak_text_streaming accept an
external stop_event so a barge cuts the streaming pipeline too.
Stop-phrase handling and voice.transcript submission are inherited
from the shared monitor (merged #73933 behavior preserved).
3. False barge during TTS (the reason interruption "worked" then
self-cancelled or fired randomly): salvaged PR #71083 by @beardedeagle
(previous commit, kept authorship) — rolling-window VAD floor, 8x
multiplier, 4000-RMS trigger ceiling, barge_in_grace_seconds (2s)
before the mic opens, min-floor clamp. barge_in_grace_seconds is now
documented in DEFAULT_CONFIG.
Desktop spoken barge (renderer mic via voice-barge-in.ts) already covers
both its live-stream and fallback speech paths — verified, no change.
Long thinking/tool stretches in a voice conversation are dead air — the
user cannot tell whether the agent is alive. New: quiet, repeating soft
bubble blips while the agent works and no speech audio is flowing.
- tools/voice_mode.py: numpy-synthesized blips (no binary assets) — two
alternating low pitches (G4/E4) with pitch glide + smooth attack/decay
envelopes, ~0.8-1.2s randomized spacing, volume = voice.beep_volume * 0.5.
start_thinking_sound(should_play=...) / stop_thinking_sound() daemon-loop
lifecycle; macOS-TCC-safe (sounddevice output gated there → silent skip,
no per-second afplay churn). New mark_audio_output_active()/
is_audio_output_active() ref-count wraps play_audio_file and the
streaming OutputStream sentence writes so "audio is flowing" is accurate.
- Config: voice.thinking_sound (default true) off-switch.
- cli.py: starts when a voice-mode turn begins, per-blip gate skips while
TTS speaks / mic records / barge capture owns the mic; stopped in the
chat() finally on every exit path.
- tui_gateway/server.py: same lifecycle around _run_prompt_submit turns
(voice mode on), gated on is_audio_output_active + continuous capture.
- Desktop: renderer owns voice-conversation audio, so a matching WebAudio
implementation (src/lib/thinking-sound.ts, same envelope/pitches) runs
while conversation status === "thinking"; honors voice.thinking_sound
(via config store) and the shared sound-mute toggle; stops instantly on
speaking/listening/end.
One owner for the wording: voice_stop_hint() in tools/voice_mode.py —
sources the phrase from voice.stop_phrases (first entry) so a custom
phrase renders correctly, and returns "" when the feature is disabled
(stop_phrases: []) so no surface shows a hint.
- CLI: printed in /voice on output (style-matched dim notice).
- TUI: voice.toggle action=on now carries stop_hint; the Ink client
renders it in the "Voice mode enabled" block (older gateways omit
the field — no hint, no crash).
- Desktop: the renderer voice loop never touches tools/voice_mode.py,
so the phrase is read from config (voice.stop_phrases → $voiceStopPhrase
store, seeded in use-hermes-config) and shown as an info toast when a
voice conversation starts. i18n: en/ja/zh/zh-hant/ar.
The continuous-voice no-speech counter (3 strikes -> voice off) counted
every silent capture cycle unconditionally. During a long agent turn
(thinking/tool-calling for minutes) or while TTS is speaking, the user
is CORRECTLY silent — those cycles ended the voice chat under them.
- hermes_cli/voice.py: new set_voice_busy_probe() seam + _voice_activity_held()
(TTS-playing via the existing _tts_playing Event, agent-busy via the
registered probe). Both the continuous-loop strike path and the
force-transcribe single-shot strike path skip counting while held.
Fail-open: a broken probe counts cycles as before.
- tui_gateway/server.py: registers _any_session_running() as the probe
on voice.record start (voice is process-global; any running session holds).
- cli.py: classic CLI strike path skips counting while _agent_running
or TTS playback is in flight.
Stop phrase and barge-in still work during the hold (own paths).
Includes a fixture fix for the #71083 cherry-pick: the fake tools.tts_tool
module needs _load_tts_config (main's tts_streaming imports it).
Replace one-shot VAD calibration with a rolling deque window that
continuously recalibrates the noise floor throughout TTS playback,
preventing false barge-in triggers from stale calibration. Add a
grace period before VAD activates so TTS playback establishes first.
Suppress duplicate text rendering when token streaming is enabled.
Mirror the barge-in and TTS stream stop logic to the TUI gateway path
so both CLI and gateway use the same VAD semantics.
Rolling-window VAD:
- 90th percentile of rolling window (~3s) for noise floor
- 8x multiplier (was 5x) for TTS volume variation headroom
- 4000 RMS trigger ceiling so genuine speech can still trip
- min_floor clamped to SILENCE_RMS_THRESHOLD * 2
- sustained_ms=1000, calibration_ms=800
Barge-in grace period (barge_in_grace_seconds, default 2.0s):
Delays VAD activation so TTS playback establishes before the mic opens.
Duplicate render suppression:
When streaming_enabled, pass display_callback=None to
stream_tts_to_speaker so the token stream is the sole display path.
TUI gateway mirror:
Mirror _tts_stream_stop and _tts_stream_barge_in_monitor changes to
tui_gateway/server.py so both code paths use the same VAD parameters,
grace period, and TTS CUT diagnostic logging.
Profile-scoped session DB and MoA progress events in tui_gateway/server.py
were necessitated by the TTS pipeline changes affecting session state
and event routing.
Normal-exit flag and TTS CUT diagnostic logging at all cut paths.
Regression tests:
- test_quiet_then_loud_playback_does_not_trip
- test_8x_multiplier_absorbs_tts_volume_spikes
- test_trigger_ceiling_lets_genuine_speech_trip
- test_silence_calibration_does_not_false_trip_on_tts
- test_tts_stream_stop_latches_interruption_for_next_turn
- test_tts_stream_stop_after_natural_finish_does_not_latch
- Profile-scoped session DB tests (10 tests)
Fixes#73973.
A finite one-shot whose dispatch was claimed (claim_dispatch increments
repeat.completed BEFORE execution) but whose run died before mark_job_run
was left permanently wedged: completed==times, last_run_at null, state
'scheduled'. The run-claim TTL blocked re-dispatch, and once it expired
the dispatch-limit guard silently removed the job with no output and no
error.
Two complementary fixes:
- cron/scheduler.py run_one_job: the outer handler now catches
BaseException, not just Exception. The inner run_job handler re-raises
CancelledError/KeyboardInterrupt/SystemExit after agent teardown, and
none of those are Exception subclasses, so the outer 'except Exception'
missed them and mark_job_run(False) was never called. Failures are now
recorded first (mark_job_run + finish_execution, each independently
guarded), then non-Exception BaseExceptions are re-raised to preserve
teardown semantics. Plain Exceptions keep the existing behavior
(recorded, return False, no re-raise). Empty str(e) (bare
CancelledError) falls back to the exception class name.
- cron/jobs.py: when either removal site (claim_dispatch or the
get_due_jobs dispatch-limit guard) drops a one-shot whose claimed run
never completed (last_run_at null), _write_wedged_oneshot_diagnostic
now writes an operator-visible .md into cron/output/<job_id>/ instead
of vanishing silently. Best-effort: diagnostics can never break the
removal. No diagnostic when last_run_at is set (normal completion
race).
Issue #65773: run_one_job installs a <home>/.env secret scope around every
job; before c758ded6d (#69057) an installed scope was authoritative even
with multiplexing off, so provider keys injected only via the process
environment (container env vars, systemd Environment=) resolved to empty
inside cron and every provider call went out with the no-key-required
placeholder -> HTTP 401, while interactive turns kept working.
The fix landed in agent/secret_scope.py (scope-miss fallthrough to
os.environ when multiplex is off) with unit tests at that layer only.
These two tests pin the end-to-end contract where the bug actually
surfaced - cron's run_one_job:
- env-injected key resolves during run_job with multiplex OFF (fails on
pre-fix code, verified by mutation against c758ded6d~1)
- .env value still wins when both sources define the key (precedence)
Implementation-agnostic: passes whether the fix is the get_secret
fallthrough (main today) or a multiplex guard at the installation site
(the approach in #65801/#65802/#73037).
The gateway's /reset cleanup path called shutdown_memory_provider without
first draining the memory manager's serialized background write worker.
shutdown_all only gives that worker a bounded (~5s) drain and abandons
whatever is still queued past it, so a /reset could silently drop writes
the session had already handed off -- the next session then loaded
stale MEMORY.md.
The CLI exit path already drains via MemoryManager.flush_pending before
shutdown; this PR pins the same contract on the gateway cleanup path.
Cleanup now calls agent._memory_manager.flush_pending(timeout=10) before
the existing shutdown_memory_provider step. The flush is best-effort:
a flush failure must never block teardown, so it is wrapped in
try/except and the existing shutdown path remains the fallback.
Closes#73297
- extract _commit_registry/_note_refresh_failure shared by the background
worker and foreground stage-4 (identical 4-step success + failure paths
were duplicated); worker now commits under _models_dev_fetch_lock so a
failing background refresh can never re-arm the backoff immediately
after a successful force_refresh committed (unsynchronized-write race)
- add should_clear_context_pin_async to hermes_cli/route_identity.py
(matching the get_model_context_length_async precedent) and use it at
the 4 async gateway sites instead of inline asyncio.to_thread wraps;
the sync _format_session_info site keeps the sync call (already
off-loop via its callers' to_thread)
- test the background-refresh success path (the PR's primary new
behavior): disk saved, mem cache swapped, backoff cleared, in_flight
reset — mutation-checked
- replace the race-prone spin-wait on _models_dev_refresh_in_flight with
a named-thread join in the backoff test
The branched call shape in get_provider_info/get_provider is deliberate:
~69 test sites across tests/hermes_cli and tests/gateway monkeypatch
fetch_models_dev (and get_provider_info) with zero/single-arg lambdas.
Passing allow_network= unconditionally broke 5 tests in CI slices 2/3/7.
Documented the constraint inline.
- _mark_stale_cache_grace only moves cache_time forward so a completed
background refresh is never rewound to a 5-minute grace window
- clear _models_dev_refresh_in_flight if Thread.start() raises so a
one-off thread-exhaustion failure doesn't disable refresh forever
- move empty-registry validation into _fetch_models_dev_from_network
(was duplicated in the background worker and the foreground fetch)
- pass allow_network through as a plain kwarg in get_provider_info and
hermes_cli.providers.get_provider instead of the branched call shape
- refresh the stale module docstring (no bundled snapshot exists; the
resolution order now describes stale-serve + background refresh)
Follow-ups on top of @DonutsDelivery's salvaged reaper commit (#64141):
- create_from_config() now parses lsp.idle_timeout (invalid values fall
back to DEFAULT_IDLE_TIMEOUT) — previously the constructor knob was
unreachable from config.yaml (config exposure adapted from #36892 by
@0xbWy and #68091 by @9miya20)
- canonical default declared in hermes_cli DEFAULT_CONFIG so config
discovery surfaces the knob (per sweeper review note on #64980)
- reaper loop survives transient sweep errors instead of dying and
silently re-opening the leak (gap flagged in #68091 review)
- eventlog.log_reaped(): one INFO line per sweep + clears the
log_active announce cache so respawns re-announce at INFO
- docs: replace the stale 'no idle-timeout reaper' paragraph with the
new lifecycle description + config reference
- tests: reuse-refresh protection (the regression teknium's sweeper
requested on #64141), reaper-survives-error, config propagation,
invalid-value fallback, DEFAULT_CONFIG/manager-constant sync
memories/MEMORY.md is the "§"-delimited store written by MemoryStore, not a
markdown document. parse_existing_memory_entries() fell back to
extract_markdown_entries() -- the *source* parser for CLAUDE.md / AGENTS.md --
whenever the destination held no delimiter, which is exactly the case for a
single-entry store or one that was hand-edited or shell-appended. That
extractor skips fenced code blocks, skips table rows, splits a block into one
entry per bullet and reflows paragraphs. The shredded result was then written
straight back over the user's store and reported as "Imported", with no backup
to recover from.
Parse the destination the way MemoryStore._parse_entries does: split on
ENTRY_DELIMITER only, so a store with no delimiter is one intact entry.
extract_markdown_entries() is unchanged and still used on the sources, where
it is correct.
Also restore the safety net the port dropped. The openclaw migration script
this module was ported from calls maybe_backup(destination) before rewriting a
memory store; the port did not. Snapshot the store to <name>.bak.<unix_ts>
(same naming as MemoryStore._backup_drifted_file), refuse to rewrite when the
snapshot fails, and write via temp file + atomic rename so an interrupted
import cannot leave a truncated store and a symlinked MEMORY.md stays a
symlink.
The identical fallback lives in openclaw_to_hermes.py, where it is reached
from migrate_memory() (memories/MEMORY.md and memories/USER.md) and
migrate_daily_memory(); fixed there too.
Follow-up for salvaged PRs #73400 + #73372:
- Move _preserve_agent_history_on_shutdown logic into
gateway/shutdown_flush.py as flush_agent_history_to_file()
- Reuse the hardened _write_payload (atomic writes, fsync, private
permissions, UUID filenames) from #73372 instead of the plain
open()/write() from #73400
- Replace os.environ.get('HERMES_HOME') with get_hermes_home() for
profile-safe path resolution
- Update tests to test the real function directly
- Net: removes 37 lines from gateway/run.py, unifies both fix paths
in a single module with consistent atomic-write guarantees
The previous attempt (#73171) snapshotted GatewayRunner._pending_messages,
which on current main has no writers (commit f6736ced8 removed its write
path; interrupt delivery uses adapter._pending_messages instead). The live
container is the per-agent agent._session_messages, flushed via
_flush_messages_to_session_db. When that flush raises (FTS/SQLite corruption,
the disk=0/memory=N state from #72680), the in-memory transcript is lost when
the process exits.
Retarget the preservation to the real path: in _finalize_shutdown_agents, wrap
the _flush call; on exception, dump agent._session_messages to an external JSON
recovery snapshot under $HERMES_HOME/shutdown-recovery/ (tagged issue=#72680)
so an operator can salvage it after repairing state.db. The dump is fully
guarded (non-fatal) so shutdown never blocks on a best-effort backup.
This directly addresses the reviewer note on #73171: retarget to the actual
cached-agent history (agent._session_messages) and prove a stale DB + shutdown
leaves a recoverable transcript.
Regression tests: tests/gateway/test_session_messages_shutdown_preserve.py
- flush raises -> recovery file written with session_id + messages
- healthy flush -> no recovery file
- write error -> non-fatal, no raise
Fixes#72680
The old test asserted _warm_gateway_module was fire-and-forget (startup
completes in << SLOW_SECONDS). PR #73291 intentionally reversed this:
the import now runs synchronously before the lifespan yield because
run_in_executor didn't release the GIL on Windows + Python 3.11.
Updated the test to assert startup blocks for >= SLOW_SECONDS.
STT previously had no configuration surface outside hand-editing
config.yaml — no category in the hermes tools picker, no provider
matrix in the GUI capabilities tab, no status line in hermes setup.
- TOOL_CATEGORIES['stt']: 7 provider rows (Local Whisper, Nous
Subscription managed, OpenAI, Groq, xAI, ElevenLabs Scribe,
DeepInfra) with key prompts, badges, and post-setup hooks
- stt_provider marker wired through _write_provider_config,
_configure_provider, _reconfigure_provider, and
_is_provider_active — GUI and CLI share one write path
(apply_provider_selection)
- STT model picker (_configure_stt_model + STT_MODEL_CATALOG) runs
after provider pick: local sizes, Groq whisper family, OpenAI
whisper-1/gpt-4o-*/gpt-transcribe, ElevenLabs scribe (model_id key)
- faster_whisper post-setup hook auto-installs the local backend;
registered in _POST_SETUP_READY
- stt is CONFIG-ONLY (_CONFIG_ONLY_TOOLSETS): it ships no tool
schemas, so it is excluded from the per-platform enable checklist;
the GUI toolset toggle writes stt.enabled instead of
platform_toolsets
- hermes setup shows a Speech-to-Text status line per provider
- Mistral row omitted (mistralai PyPI quarantine), mirroring the
dashboard stt.provider options
Tests: tests/hermes_cli/test_stt_picker.py (20 cases) incl. invariant
checks against agent.transcription_registry builtins and the runtime
OPENAI_MODELS/GROQ_MODELS sets.
Follow-up on the #53205 salvage: replace bare is_file() probes of the
managed (~/.hermes/node[/bin]) and legacy (node_modules/.bin) locations
with shutil.which(..., path=dir) so Windows resolves the executable
.cmd shim instead of the extensionless POSIX script — the same miss
class fixed for _has_agent_browser() in #73932. Also covers the
Windows managed layout where the binary sits in node/ directly.
`hermes acp --setup-browser` installs agent-browser into the Hermes-managed
node prefix (~/.hermes/node/bin/agent-browser), which isn't necessarily on
PATH. doctor only checked PROJECT_ROOT/node_modules and PATH (shutil.which),
so it false-negatived with "agent-browser not installed" even though the
binary was present and runnable. Mirror dep_ensure._has_hermes_agent_browser()
by also checking HERMES_HOME/node/bin and the legacy
HERMES_HOME/node_modules/.bin path, each gated by agent_browser_runnable().
Tested with tests/hermes_cli/test_doctor.py (added positive + not-runnable
cases) and pytest tests/hermes_cli/test_doctor.py -q (66 passed).
The exact kwargs snapshot broke when VAD hardening added keys — the
test's real contract is 'null stt.local: must not crash or force
language/prompt'. Baseline kwargs are pinned by the dedicated suite.
Local faster-whisper called model.transcribe with bare {'beam_size': 5}:
no VAD, cross-window conditioning on, no confidence filtering. Pure
silence produced hallucinated tokens (E2E: 5s anullsrc WAV -> 'You',
no_speech_prob=0.705) and noisy clips could produce runs of junk, often
in other languages.
Three-layer class fix, one shared owner for every local-whisper call
site (build_local_transcribe_kwargs):
1. Silero VAD filter (bundled with faster-whisper) on by default —
silence never reaches the model. stt.local.vad: false restores the
raw behavior for music/ambient transcription.
stt.local.vad_min_silence_ms tunes chunk splitting (default 500).
2. condition_on_previous_text=False — one hallucinated token can no
longer seed a self-reinforcing run; negligible cost for
voice-note-length audio.
3. Segment confidence gate (_join_confident_segments): drop a segment
only when no_speech_prob > 0.6 AND avg_logprob < -1.0 (openai-whisper's
own heuristic shape; both must hit so quiet-but-real speech survives).
Config: stt.local.no_speech_prob_threshold / logprob_threshold.
The WHISPER_HALLUCINATIONS blocklist in voice_mode.py stays as
last-resort defense but should now almost never fire.
E2E (real faster-whisper 'base', CPU int8):
silence.wav before 'You' -> after ''
noise.wav before '' -> after ''
speech.wav before/after 'Hello World, this is a test of the
transcription system.' (unchanged)
Docs (EN + zh-Hans), DEFAULT_CONFIG, cli-config.yaml.example updated;
19 unit tests (kwargs contract, off-switch, confidence gate incl.
quiet-speech survival, _transcribe_local wiring), sabotage-verified.
Saying OR typing a configured stop phrase (voice.stop_phrases, default
"stop") now ends the voice chat everywhere, not just classic CLI PTT:
- hermes_cli/voice.py: new explicit on_stop_phrase callback through
start_continuous/stop_continuous. The force-transcribe path previously
DISCARDED the stop phrase silently — with auto_restart=False the client
re-arms the next capture, so the conversation never ended. Both halt
paths now fire on_stop_phrase (fallback: on_silent_limit for legacy
callers) as user intent, distinct from the no-speech timeout.
- tui_gateway/server.py: voice.record wires on_stop_phrase and emits
voice.transcript {stop_phrase: true} after flipping HERMES_VOICE(_TTS)
off and stopping streaming TTS — same teardown as /voice off. The TTS
barge-in monitor stop-checks its transcript too. prompt.submit consumes
a TYPED bare stop phrase at the server-side choke point when voice mode
is on (returns {voice_stopped: true}, no turn starts).
- ui-tui: voice.transcript {stop_phrase} ends voice mode with a clear
'voice chat ended' notice (distinct from the no-speech-limit message);
submitPrompt releases the busy latch on a consumed voice_stopped reply.
- cli.py: _typed_voice_stop in process_loop — typing a bare stop phrase
while voice mode/continuous is active ends voice mode instead of
sending 'stop' to the agent; typed 'stop' outside voice mode is
unchanged. Voice transcripts skip the check (already stop-checked).
- desktop: interceptsTypedVoiceStop — the composer's onSubmit ends the
live voice conversation (same path as clicking end on the pill) when a
bare stop command is typed with no attachments; renderer-owned loop, so
handled client-side like the existing spoken isVoiceStopCommand.
- tools/voice_mode.py: transcribe_recording never lets the Whisper
hallucination filter swallow a configured stop phrase (e.g. 'bye'
configured as a stop phrase is both a hallucination-blocklist entry and
a stop phrase — stop-phrase check now wins).
Tests: continuous-loop signal (sabotage-verified), force-transcribe stop
signal + legacy fallback, hallucination-filter ordering, typed-stop CLI
unit tests (voice on/off/longer text), prompt.submit typed-stop gateway
tests, TUI vitest for stop_phrase event handling, desktop vitest for the
typed-stop interceptor.
Streamed response text carried a 4-space _STREAM_PAD indent and the
final-response Rich Panel used padding=(1, 4), so every line selected
out of the terminal came with leading whitespace. Both now render
flush-left (pad empty, panel padding=(1, 0)); the table-realignment
width budgets were widened to match.
/copy now writes the ORIGINAL message text through native clipboard
tools (pbcopy / PowerShell Set-Clipboard via base64 / wl-copy / xclip /
xsel — same fallback chain as the TUI's writeClipboardText), falling
back to OSC 52 only when no native backend succeeds. This is the
TUI-equivalent answer to soft-wrap mangling: the clipboard gets the raw
text, not the rendered layout.
_has_agent_browser()'s new managed-Node rung calls
shutil.which('agent-browser', path=...); tests that monkeypatch
shutil.which globally with 1-arg lambdas raised TypeError when their
code path reached the browser readiness probe (test_post_setup_gating,
test_setup_model_provider).
Three GUI Capabilities-tab defects reported on Windows:
1. Browser rows stuck on 'Setup required' after a successful setup run.
Root causes, all in the readiness probe (not the installer):
- _has_agent_browser() never searched the Hermes-managed Node dir
(%LOCALAPPDATA%/hermes/node / $HERMES_HOME/node/bin) where the
Windows install lands, and probed node_modules/.bin/agent-browser
as the extensionless POSIX shim, which fails exec on Windows
(WinError 193) — now resolved via PATHEXT-aware shutil.which
against both rungs, mirroring _find_agent_browser().
- Cloud rows (Nous Subscription Browser Use, Browserbase, Browser
Use, Firecrawl) declared post_setup: agent_browser, whose
readiness gate requires a LOCAL Chromium build the cloud never
uses — switched to the cloud-scoped 'browserbase' hook (CLI-only).
- _agent_browser_installed() could read browser_tool's stale cached
'Chromium missing' result from before the install ran in the
spawned post-setup process — cache now dropped before probing so
the pill flips to Ready right after a successful run.
2. No way to tell which backend is active, and clicking a row to read
its details silently rewrote config. Row click now only
expands/collapses; activation is an explicit 'Use this backend'
button, the active row carries an 'Active' pill, and the expanded
active row says 'This is your active backend'.
3. OpenAI TTS showed one model and one voice. The options were always
defined but rendered through a native <datalist>, which filters by
the field's current value — a field already set to a valid option
suggested only itself. Replaced with a real combobox (Input +
dropdown) that lists every option, and voice suggestions now track
the selected model per the OpenAI TTS docs: tts-1/tts-1-hd = 9
voices, gpt-4o-mini-tts = 13 (adds ballad, verse, marin, cedar).
The Skills Hub 'Marketplace' tab showed a single useless entry: Anthropic
changed .claude-plugin/marketplace.json to bundle-shaped plugins whose
source is './', so all plugins collapsed to one identifier pointing at the
repo root, and the second marketplace repo (aiskillstore/marketplace) is
gone (404). Everything in anthropics/skills is already surfaced by the
GitHub tap as the Anthropic tab, making this source fully redundant.
Removes ClaudeMarketplaceSource and all wiring: source router, index
builder (crawl + floors + sort order + rate-limit messaging), extract
labels/install/URL mapping, hub UI tab, web server labels, CLI limits,
docs (en + zh), the legacy index-cache snapshot, and test fixtures.
Stale skills-index entries with source 'claude-marketplace' still install
fine: HermesIndexSource fetches via resolved GitHub paths generically.
Replace 20 lines of manual os.open/O_EXCL/fdopen/fsync/os.replace with the
existing atomic_json_write() from utils.py, which is already used by 6+
modules and handles temp-file creation, fsync, atomic replace, mode
control, and owner preservation. The only novel helper (_fsync_directory)
is retained — atomic_json_write does not do directory fsync.
Update test_flush_write_failure_leaves_no_recovery_file to monkeypatch
utils.os.replace (the new call path) instead of gateway.shutdown_flush.os.replace.
test_default_bind_serves_both_families asserts an IPv6 listening socket
exists, which is the environment's capability, not the adapter's — CI
runners with IPv6 disabled would flake. Probe an actual ::1 bind (not
just socket.has_ipv6, a compile-time constant) and skip cleanly when
the host has no usable IPv6 stack.
The LINE adapter's webhook server defaulted to host="0.0.0.0", which
binds IPv4 ONLY. On IPv6-only private networks — notably Fly.io 6PN,
where the hosted edge router reverse-proxies LINE ingest to
<app>.internal:8646 over an fdaa: IPv6 address — nothing is listening
on the dialed address: connection refused → customer-visible 502 when
LINE's console verifies the webhook (NS-603).
This is the same bug the generic webhook adapter fixed in d542894ad;
the LINE adapter was never updated to match. Fix mirrors that commit:
- DEFAULT_HOST = None → asyncio/aiohttp create_server binds one socket
per address family (v4 + v6), regardless of the bindv6only sysctl.
"::" is NOT a valid substitute — Fly machines set bindv6only=1, so
it would yield an IPv6-only socket and break IPv4 loopback probes.
- Empty-string host collapses to None; LINE_HOST/extra.host still pin
a specific bind address.
- reuse_address=False scoped to macOS only (BSD wildcard-socket
traffic-splitting footgun), mirroring 9420ad946.
- The three outbound-media guards compared webhook_host == "0.0.0.0"
by string equality; extracted to _missing_public_url() which treats
None/0.0.0.0/::/"" as "no fetchable hostname" so the LINE_PUBLIC_URL
requirement still fires under the new default. _media_url() falls
back to 127.0.0.1 instead of interpolating 'None' into URLs.
Tests: dual-stack default decision table (default None, empty→None,
pinned preserved, LINE_HOST override), behavioural both-families bind
proof via runner.addresses, and the media public-URL guard matrix.
88 passed, ruff clean.
Companion router fix (hermes-agent-router) routes /webhooks/line and
/line/webhook|/line/media to :8646 over 6PN; both are needed for
end-to-end hosted LINE delivery.
Fixes NS-603
show_status now reads get_nous_auth_status_local(); the test_status.py
mocks still patched the old live-resolve entry point, so the patched
dict was never consumed (CI slice 8/8 red on the salvage PR).
Follow-up widening of the /api/status fix: add get_nous_auth_status_local(),
a refresh-free auth-store snapshot (local invoke-JWT decode only), and use it
on the read-only display surfaces that previously called
get_nous_auth_status() -> resolve_nous_runtime_credentials() -> live OAuth
refresh POST:
- hermes_cli/status.py (hermes status auth-provider panel)
- hermes_cli/doctor.py (hermes doctor auth-provider checks)
- hermes_cli/portal_cli.py (hermes portal status display)
- hermes_cli/web_server.py /api/portal endpoint and the accounts-tab
provider card dispatcher (_resolve_provider_status nous branch)
Action paths (login flows, portal operations needing a live credential)
keep using get_nous_auth_status(). Part of NS-592.
