The TUI had drifted from the CLI's voice model in two ways:
- /voice on was lighting up the microphone immediately and Ctrl+B was
interpreted as a mode toggle. The CLI separates the two: /voice on
just flips the umbrella bit, recording only starts once the user
presses Ctrl+B, which also sets _voice_continuous so the VAD loop
auto-restarts until the user presses Ctrl+B again or three silent
cycles pass.
- /voice tts was missing entirely, so users couldn't turn agent reply
speech on/off from inside the TUI.
This commit brings the TUI to parity.
Python
- hermes_cli/voice.py: continuous-mode API (start_continuous,
stop_continuous, is_continuous_active) layered on the existing PTT
wrappers. The silence callback transcribes, fires on_transcript,
tracks consecutive no-speech cycles, and auto-restarts — mirroring
cli.py:_voice_stop_and_transcribe + _restart_recording.
- tui_gateway/server.py:
- voice.toggle now supports on / off / tts / status. The umbrella
bit lives in HERMES_VOICE + display.voice_enabled; tts lives in
HERMES_VOICE_TTS + display.voice_tts. /voice off also tears down
any active continuous loop so a toggle-off really releases the
microphone.
- voice.record start/stop now drives start_continuous/stop_continuous.
start is refused with a clear error when the mode is off, matching
cli.py:handle_voice_record's early return on `not _voice_mode`.
- New voice.transcript / voice.status events emit through
_voice_emit (remembers the sid that last enabled the mode so
events land in the right session).
TypeScript
- gatewayTypes.ts: voice.status + voice.transcript event
discriminants; VoiceToggleResponse gains tts; VoiceRecordResponse
gains status for the new "started/stopped" responses.
- interfaces.ts: GatewayEventHandlerContext gains composer.setInput +
submission.submitRef + voice.{setRecording, setProcessing,
setVoiceEnabled}; InputHandlerContext.voice gains enabled +
setVoiceEnabled for the mode-aware Ctrl+B handler.
- createGatewayEventHandler.ts: voice.status drives REC/STT badges;
voice.transcript auto-submits when the composer is empty (CLI
_pending_input.put parity) and appends when a draft is in flight.
no_speech_limit flips voice off + sys line.
- useInputHandlers.ts: Ctrl+B now calls voice.record (start/stop),
not voice.toggle, and nudges the user with a sys line when the
mode is off instead of silently flipping it on.
- useMainApp.ts: wires the new event-handler context fields.
- slash/commands/session.ts: /voice handles on / off / tts / status
with CLI-matching output ("voice: mode on · tts off").
Backward compat preserved for voice.record (was always PTT shape;
gateway still honours start/stop with mode-gating added).
When the user runs /voice and then presses Ctrl+B in the TUI, three
handlers collaborate to consume the chord and none of them dispatch
voice.record:
- isAction() is platform-aware — on macOS it requires Cmd (meta/super),
so Ctrl+B fails the match in useInputHandlers and never triggers
voiceStart/voiceStop.
- TextInput's Ctrl+B pass-through list doesn't include 'b', so the
keystroke falls through to the wordMod backward-word branch on Linux
and to the printable-char insertion branch on macOS — the latter is
exactly what timmie reported ("enters a b into the tui").
- /voice emits "voice: on" with no hint, so the user has no way to
know Ctrl+B is the recording toggle.
Introduces isVoiceToggleKey(key, ch) in lib/platform.ts that matches
raw Ctrl+B on every platform (mirrors tips.py and config.yaml's
voice.record_key default) and additionally accepts Cmd+B on macOS so
existing muscle memory keeps working. Wires it into useInputHandlers,
adds Ctrl+B to TextInput's pass-through list so the global handler
actually receives the chord, and appends "press Ctrl+B to record" to
the /voice on message.
Empirically verified with hermes --tui: Ctrl+B no longer leaks 'b'
into the composer and now dispatches the voice.record RPC (the
downstream ImportError for hermes_cli.voice is a separate upstream
bug — follow-up patch).
- normalizeStatusBar collapses to one ternary expression
- /statusbar slash hoists the toggle value and flattens the branch tree
- shift-tab yolo comment reduced to one line
- cursorLayout/offsetFromPosition lose paragraph-length comments
- appLayout collapses the three {!overlay.agents && …} into one fragment
- StatusRule drops redundant flexShrink={0} (Yoga default)
- server.py uses a walrus + frozenset and trims the compat helper
Net -43 LoC. 237 vitest + 46 pytest green, layouts unchanged.
'top' and 'bottom' are positions relative to the input row, not the alt
screen viewport:
- top (default) → inline above the input, where the bar originally lived
(what 'on' used to mean)
- bottom → below the input, pinned to the last row
- off → hidden
Drops the literal top-of-screen placement; 'on' is kept as a backward-
compat alias that resolves to 'top' at both the config layer
(normalizeStatusBar, _coerce_statusbar) and the slash command.
Default is back to 'on' (inline, above the input) — bottom was too far
from the input and felt disconnected. Users who want it pinned can
opt in explicitly.
- UiState.statusBar: boolean → 'on' | 'off' | 'bottom' | 'top'
- /statusbar [on|off|bottom|top|toggle]; no-arg still binary-toggles
between off and on (preserves muscle memory)
- appLayout renders StatusRulePane in three slots (inline inside
ComposerPane for 'on', above transcript row for 'top', after
ComposerPane for 'bottom'); only the slot matching ui.statusBar
actually mounts
- drop the input's marginBottom when 'bottom' so the rule sits tight
against the input instead of floating a row below
- useConfigSync.normalizeStatusBar coerces legacy bool (true→on,
false→off) and unknown shapes to 'on' for forward-compat reads
- tui_gateway: split compact from statusbar config handlers; persist
string enum with _coerce_statusbar helper for legacy bool configs
- createGatewayEventHandler: remove dead `return` after a block that
always returns (tool.complete case). The inner block exits via
both branches so the outer statement was never reachable. Was
pre-existing on main; fixed here because it was the only thing
blocking `npm run fix` on this branch.
- agentsOverlay + ops: prettier reformatting.
`npm run fix` / `npm run type-check` / `npm test` all clean.
Adds a live + post-hoc audit surface for recursive delegate_task fan-out.
None of cc/oc/oclaw tackle nested subagent trees inside an Ink overlay;
this ships a view-switched dashboard that handles arbitrary depth + width.
Python
- delegate_tool: every subagent event now carries subagent_id, parent_id,
depth, model, tool_count; subagent.complete also ships input/output/
reasoning tokens, cost, api_calls, files_read/files_written, and a
tail of tool-call outputs
- delegate_tool: new subagent.spawn_requested event + _active_subagents
registry so the overlay can kill a branch by id and pause new spawns
- tui_gateway: new RPCs delegation.status, delegation.pause,
subagent.interrupt, spawn_tree.save/list/load (disk under
\$HERMES_HOME/spawn-trees/<session>/<ts>.json)
TUI
- /agents overlay: full-width list mode (gantt strip + row picker) and
Enter-to-drill full-width scrollable detail mode; inverse+amber
selection, heat-coloured branch markers, wall-clock gantt with tick
ruler, per-branch rollups
- Detail pane: collapsible accordions (Budget, Files, Tool calls, Output,
Progress, Summary); open-state persists across agents + mode switches
via a shared atom
- /replay [N|last|list|load <path>] for in-memory + disk history;
/replay-diff <a> <b> for side-by-side tree comparison
- Status-bar SpawnHud warns as depth/concurrency approaches caps;
overlay auto-follows the just-finished turn onto history[1]
- Theme: bump DARK dim #B8860B → #CC9B1F for readable secondary text
globally; keep LIGHT untouched
Tests: +29 new subagentTree unit tests; 215/215 passing.
Reported during TUI v2 blitz retest: `/history` in the TUI only shows
prompts from non-TUI Hermes runs and can't scroll the window. Root
cause is the slash-worker subprocess: it's a detached HermesCLI that
never sees the TUI's turns, so its `conversation_history` starts empty
and `show_history` surfaces whatever was persisted from earlier CLI
sessions — not what the user just did inside the TUI.
Intercept `/history` as a local slash command so it dumps
`ctx.local.getHistoryItems()` — the TUI's own transcript — routed
through the pager (which scrolls after #13591). Accepts an optional
preview-length argument (default 400 chars per message).
Adds createSlashHandler coverage.
/tools' local handler silently returned for anything other than enable
or disable, so /tools list and friends looked broken even though the
Python CLI already implements them (hermes_cli/main.py registers
tools_sub for list/enable/disable).
Keep the client-owned enable/disable path (which has to run
session.setSessionStartedAt + resetVisibleHistory locally) and route
every other sub through slash.exec, matching createSlashHandler's
page/sys split for long vs short output.
Six small fixes, all valid review feedback:
- gatewayClient: onTimeout is now a class-field arrow so setTimeout gets a
stable reference — no per-request bind allocation (the whole point of
the original refactor).
- memory: growth rate was lifetime average of rss/uptime, which reports
phantom growth for stable processes. Now computed as delta since a
module-load baseline (STARTED_AT). Sanity-checked: 0.00 MB/hr at
steady-state, non-zero after an allocation.
- hermes_cli: NODE_OPTIONS merge is now token-aware — respects a
user-supplied --max-old-space-size (don't downgrade a deliberate 16GB
setting) and avoids duplicating --expose-gc.
- useVirtualHistory: if items shrink past the frozen range's start
mid-freeze (/clear, compaction), drop the freeze and fall through to
the normal range calc instead of collapsing to an empty mount.
- circularBuffer: throw on non-positive capacity instead of silently
producing NaN indices.
- debug slash help: /heapdump mentions HERMES_HEAPDUMP_DIR override
instead of hardcoding the default path.
Validation: tsc clean, eslint clean, vitest 102/102, growth-rate smoke
test confirms baseline=0 → post-alloc>0.
Long TUI sessions were crashing Node via V8 fatal-OOM once transcripts +
reasoning blobs crossed the default 1.5–4GB heap cap. This adds defense
in depth: a bigger heap, leak-proofing the RPC hot path, bounded
diagnostic buffers, automatic heap dumps at high-water marks, and
graceful signal / uncaught handlers.
## Changes
### Heap budget
- hermes_cli/main.py: `_launch_tui` now injects `NODE_OPTIONS=
--max-old-space-size=8192 --expose-gc` (appended — does not clobber
user-supplied NODE_OPTIONS). Covers both `node dist/entry.js` and
`tsx src/entry.tsx` launch paths.
- ui-tui/src/entry.tsx: shebang rewritten to
`#!/usr/bin/env -S node --max-old-space-size=8192 --expose-gc` as a
fallback when the binary is invoked directly.
### GatewayClient (ui-tui/src/gatewayClient.ts)
- `setMaxListeners(0)` — silences spurious warnings from React hook
subscribers.
- `logs` and `bufferedEvents` replaced with fixed-capacity
CircularBuffer — O(1) push, no splice(0, …) copies under load.
- RPC timeout refactor: `setTimeout(this.onTimeout.bind(this), …, id)`
replaces the inline arrow closure that captured `method`/`params`/
`resolve`/`reject` for the full 120 s request timeout. Each Pending
record now stores its own timeout handle, `.unref()`'d so stuck
timers never keep the event loop alive, and `rejectPending()` clears
them (previously leaked the timer itself).
### Memory diagnostics (new)
- ui-tui/src/lib/memory.ts: `performHeapDump()` +
`captureMemoryDiagnostics()`. Writes heap snapshot + JSON diag
sidecar to `~/.hermes/heapdumps/` (override via
`HERMES_HEAPDUMP_DIR`). Diagnostics are written first so we still get
useful data if the snapshot crashes on very large heaps.
Captures: detached V8 contexts (closure-leak signal), active
handles/requests (`process._getActiveHandles/_getActiveRequests`),
Linux `/proc/self/fd` count + `/proc/self/smaps_rollup`, heap growth
rate (MB/hr), and auto-classifies likely leak sources.
- ui-tui/src/lib/memoryMonitor.ts: 10 s interval polling heapUsed. At
1.5 GB writes an auto heap dump (trigger=`auto-high`); at 2.5 GB
writes a final dump and exits 137 before V8 fatal-OOMs so the user
can restart cleanly. Handle is `.unref()`'d so it never holds the
process open.
### Graceful exit (new)
- ui-tui/src/lib/gracefulExit.ts: SIGINT/SIGTERM/SIGHUP run registered
cleanups through a 4 s failsafe `setTimeout` that hard-exits if
cleanup hangs.
`uncaughtException` / `unhandledRejection` are logged to stderr
instead of crashing — a transient TUI render error should not kill
an in-flight agent turn.
### Slash commands (new)
- ui-tui/src/app/slash/commands/debug.ts:
- `/heapdump` — manual snapshot + diagnostics.
- `/mem` — live heap / rss / external / array-buffer / uptime panel.
- Registered in `ui-tui/src/app/slash/registry.ts`.
### Utility (new)
- ui-tui/src/lib/circularBuffer.ts: small fixed-capacity ring buffer
with `push` / `tail(n)` / `drain()` / `clear()`. Replaces the ad-hoc
`array.splice(0, len - MAX)` pattern.
## Validation
- tsc `--noEmit` clean
- `vitest run`: 15 files, 102 tests passing
- eslint clean on all touched/new files
- build produces executable `dist/entry.js` with preserved shebang
- smoke-tested: `HERMES_HEAPDUMP_DIR=… performHeapDump('manual')`
writes both a valid `.heapsnapshot` and a `.diagnostics.json`
containing detached-contexts, active-handles, smaps_rollup.
## Env knobs
- `HERMES_HEAPDUMP_DIR` — override snapshot output dir
- `HERMES_HEAPDUMP_ON_START=1` — dump once at boot
- existing `NODE_OPTIONS` is respected and appended, not replaced
The time-window gate felt wrong — users would hit /clear, read the
prompt, retype, and consistently blow past the window. Swapping to a
real yes/no overlay that blocks input like the existing Approval and
Clarify prompts.
- add ConfirmReq type + OverlayState.confirm + $isBlocked coverage
- ConfirmPrompt component (prompts.tsx): cancel row on top as the
default, danger-coloured confirm row on the bottom, Y/N hotkeys,
Enter on default = cancel, Esc/Ctrl+C cancel
- wire into PromptZone (appOverlays.tsx)
- /clear + /new now push onto the overlay instead of arming a timer
- HERMES_TUI_NO_CONFIRM=1 still skips the prompt for scripting
- drop the destructiveGate + createSlashHandler reset wiring
(destructive.ts and its tests removed)
Refs #4069.
The 3s gate was too tight — users reading the prompt and retyping
consistently blow past it and get stuck in a loop ("press /clear
again within 3s" forever). Fixes:
- bump CONFIRM_WINDOW_MS 3_000 → 30_000
- drop the time number from the confirmation message to remove the
pressure vibe: "press /clear again to confirm — starts a new session"
- reset the gate from createSlashHandler whenever any non-destructive
slash command runs, so stale arming from 20s ago can't silently
turn the next /clear into an unintended confirm
- export the gate + isDestructiveCommand helper for that wiring
- add armed() introspection method
Follow-up to #4069 / 3366714b.
Prevents accidental session loss: the first press prints
"press /clear again within 3s to confirm"; a second press inside
the window actually starts a new session. Outside the window the
gate re-arms.
Opt out with HERMES_TUI_NO_CONFIRM=1 for scripted / muscle-memory
workflows.
Refs #4069.
Previous handler dumped the raw skills.manage response into a pager, which
was unreadable and hid the pagination metadata. Also silently accepted
non-numeric page args.
Now:
- validates page arg (rejects NaN / <1 with a usage message)
- shows "fetching community skills (scans 6 sources, may take ~15s)…" up
front so the 10-30s hub fetch isn't a silent hang
- renders items as {name · trust, description (truncated 160 chars)} rows
in the existing Panel component
- footer shows "page X of Y · N skills total · /skills browse N+1 for more"
when the server returned pagination metadata
Skills hub's remote fetch latency is a separate upstream issue
(browse_skills hits 6 sources sequentially) — client-side we just stop
misrepresenting it.
/skills install, inspect, search, browse, list now call the typed skills.manage RPC
and render results via panel/page. Previously they fell through to slash.exec which
invokes v1's curses code path — that hangs or crashes inside the Ink worker per the
§2 parity-audit finding.
Also drop Enter-as-install from the Skills Hub action stage since the Hub lists
locally installed skills; primary action is inspect-and-close. x still triggers a
manual reinstall for power users.
Intercept bare /skills locally and flip overlay.skillsHub, so the
overlay opens instantly without waiting on slash.exec. /skills <args>
still forwards to slash.exec and paginates any output. Tests cover
both branches.
* feat(steer): /steer <prompt> injects a mid-run note after the next tool call
Adds a new slash command that sits between /queue (turn boundary) and
interrupt. /steer <text> stashes the message on the running agent and
the agent loop appends it to the LAST tool result's content once the
current tool batch finishes. The model sees it as part of the tool
output on its next iteration.
No interrupt is fired, no new user turn is inserted, and no prompt
cache invalidation happens beyond the normal per-turn tool-result
churn. Message-role alternation is preserved — we only modify an
existing role:"tool" message's content.
Wiring
------
- hermes_cli/commands.py: register /steer + add to ACTIVE_SESSION_BYPASS_COMMANDS.
- run_agent.py: add _pending_steer state, AIAgent.steer(), _drain_pending_steer(),
_apply_pending_steer_to_tool_results(); drain at end of both parallel and
sequential tool executors; clear on interrupt; return leftover as
result['pending_steer'] if the agent exits before another tool batch.
- cli.py: /steer handler — route to agent.steer() when running, fall back to
the regular queue otherwise; deliver result['pending_steer'] as next turn.
- gateway/run.py: running-agent intercept calls running_agent.steer(); idle-agent
path strips the prefix and forwards as a regular user message.
- tui_gateway/server.py: new session.steer JSON-RPC method.
- ui-tui: SessionSteerResponse type + local /steer slash command that calls
session.steer when ui.busy, otherwise enqueues for the next turn.
Fallbacks
---------
- Agent exits mid-steer → surfaces in run_conversation result as pending_steer
so CLI/gateway deliver it as the next user turn instead of silently dropping it.
- All tools skipped after interrupt → re-stashes pending_steer for the caller.
- No active agent → /steer reduces to sending the text as a normal message.
Tests
-----
- tests/run_agent/test_steer.py — accept/reject, concatenation, drain,
last-tool-result injection, multimodal list content, thread safety,
cleared-on-interrupt, registry membership, bypass-set membership.
- tests/gateway/test_steer_command.py — running agent, pending sentinel,
missing steer() method, rejected payload, empty payload.
- tests/gateway/test_command_bypass_active_session.py — /steer bypasses
the Level-1 base adapter guard.
- tests/test_tui_gateway_server.py — session.steer RPC paths.
72/72 targeted tests pass under scripts/run_tests.sh.
* feat(steer): register /steer in Discord's native slash tree
Discord's app_commands tree is a curated subset of slash commands (not
derived from COMMAND_REGISTRY like Telegram/Slack). /steer already
works there as plain text (routes through handle_message → base
adapter bypass → runner), but registering it here adds Discord's
native autocomplete + argument hint UI so users can discover and
type it like any other first-class command.
- hermes-ink: export `withInkSuspended()` + `useExternalProcess()` that
pause/resume Ink around an arbitrary external process (built on the
existing enterAlternateScreen/exitAlternateScreen plumbing)
- tui: `launchHermesCommand(args)` spawns the `hermes` binary with
inherited stdio, with `HERMES_BIN` override for non-standard launches
- tui: `/model` and `/setup` slash commands invoke the CLI wizards
in-place, then re-preflight `setup.status` and auto-start a session on
success — no more exit-and-relaunch to finish first-run setup
- setup panel now advertises those slashes instead of only pointing
users back at the shell
The status bar was showing stale lifecycle text ("running…") while the
face+verb stream flickered through the thinking panel as Python pushed
thinking.delta events. That's backwards — the face ticker is the
primary "I'm alive" signal, it belongs in the status bar; the thinking
panel is for substantive reasoning and tool activity.
Status bar now reads `ui.busy`: when true, renders a local `<FaceTicker>`
cycling FACES × VERBS on a 2.5s interval, unaffected by server events.
When false, the bar shows the actual status string (ready, starting
agent…, interrupted, etc.).
Side effect: `scheduleThinkingStatus` still patches `ui.status` with
Python's face text, but while busy the bar ignores that string and uses
the ticker instead. No server-side changes needed — Python keeps
emitting thinking.delta as a liveness heartbeat, the TUI just doesn't
let it fight the status bar.
Python's slash worker already prints every echo/panel command through Rich.
TS was reformatting the same data client-side for 23 commands. Delete those
shadows; let the `slash.exec` fallback in `createSlashHandler` route the
worker's text (via `<Ansi>`) and page-wrap long output.
TS registry now contains 23 commands (down from 45) — only those that:
- mutate React-local state (composer, transcript, overlays, uiStore)
- touch the terminal (OSC52 copy, `$EDITOR`, clipboard)
- open pickers (`/model`, `/resume`)
- trigger history surgery (`/undo`, `/retry`, `/compress`, `/personality`)
- need TS-only composition (`/help` merges HOTKEYS + catalog)
Deleted shadows:
session: yolo, skin, verbose, reasoning, provider, stop, reload-mcp,
save, title, insights, debug, fast, platforms, snapshot,
usage, history, profile
ops: plugins, rollback, agents, tasks, cron, config, toolsets,
browser, skills (list/browse only; `/tools configure` kept
for its history-reset side effect)
Side effects:
- Drops `slash/shared.ts` + `SlashShared` + `shared`/`SLASH_OUTPUT_PAGE` —
generic slash.exec fallback handles titled paging via `createSlashHandler`.
- Prunes 17 now-unreferenced `*Response` interfaces from gatewayTypes.ts.
- `createSlashHandler` fallback now pages long output (len>180 || lines>2)
and uses the command name as title.
session.ts: 670 -> 199 (-70%)
ops.ts: 460 -> 52 (-88%)
gatewayTypes.ts: 450 -> 302 (-33%)
Hoist turn state from a 286-line hook into $turnState atom + turnController
singleton. createGatewayEventHandler becomes a typed dispatch over the
controller; its ctx shrinks from 30 fields to 5. Event-handler refs and 16
threaded actions are gone.
Fold three createSlash*Handler factories into a data-driven SlashCommand[]
registry under slash/commands/{core,session,ops}.ts. Aliases are data;
findSlashCommand does name+alias lookup. Shared guarded/guardedErr combinator
in slash/guarded.ts.
Split constants.ts + app/helpers.ts into config/ (timing/limits/env),
content/ (faces/placeholders/hotkeys/verbs/charms/fortunes), domain/ (roles/
details/messages/paths/slash/viewport/usage), protocol/ (interpolation/paste).
Type every RPC response in gatewayTypes.ts (26 new interfaces); drop all
`(r: any)` across slash + main app.
Shrink useMainApp from 1216 -> 646 lines by extracting useSessionLifecycle,
useSubmission, useConfigSync. Add <Fg> themed primitive and strip ~50
`as any` color casts.
Tests: 50 passing. Build + type-check clean.
