The in_channel flat-delivery clear was gated on `runtime_adapter is not
None`, but the flat continuation session is seeded ONLY on the live-send
path, which also requires a running event loop. When an adapter is
present but the loop is absent/not-running, the live-send/seed block is
skipped and delivery falls through to the standalone path — clearing
thread_id there flattened an unseeded brief with no continuable session
behind it (and bypassed the D6 capability check).
Factor the live-send condition into `live_adapter_ready` and gate both
the thread_id clear and the live-send block on it, so the clear can no
longer drift from the seed. Add an adapter-present/no-running-loop
regression test (verified it fails against the un-scoped clear).
Addresses review r3609147550.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
cron_continuable_surface=in_channel is meant to deliver a cron brief FLAT
into a channel (thread_id=None) so a plain channel reply continues the job
via the shared-channel session. The scheduler already seeds that flat
session (_seed_cron_channel_session) but never cleared the ORIGINAL
target/origin thread_id before routing the actual delivery, so a job
scheduled from inside a Slack thread still delivered into that origin
thread — the seeded continuable session then never matched where the brief
actually landed.
Clear thread_id once in_channel_surface is finalized, before it is re-read
for route_thread_id / the standalone fallback. Scope the clear to EXACTLY
the target that gets flat-seeded — the origin-continuable target
(mirror_this_target) on a live, in_channel-capable adapter
(runtime_adapter is not None):
- fan-out / broadcast / explicit-thread targets keep their thread_id — they
are not continuable and are never seeded, so flattening them would
reroute an explicit thread and could collapse two targets into duplicate
flat sends;
- the standalone no-live-adapter path keeps the origin thread — it can
never seed the flat session, and without an adapter the D6 capability
fail-safe can't run, so flattening there would both drop the brief out of
any continuable lane and bypass D6.
This keeps the clear in lockstep with the seed condition
(in_channel_surface and mirror_this_target) and the D6 fail-safe.
mirror_this_target / origin_user_id are computed earlier using the original
thread_id to match the origin conversation.
Regression tests in TestCronContinuableSurfaceInChannel:
- a job whose origin carries a thread_id must not forward that thread_id to
the live adapter (DeliveryRouter folds target.thread_id into send
metadata), and the seeded continuable session stays flat (thread_id=None);
- with no live adapter, the standalone send falls back to the origin thread
rather than flattening.
With compression.in_place defaulting True the cron session id never
rotates; get_compression_tip returns the input id. Pin that the
salvaged #67188 fix titles/ends the ORIGINAL cron session in that path
(and for falsy tip returns), i.e. zero behavior change when no
compression rotation happened. Also maps colingreig's contributor
email for attribution CI.
Switch provider and model together after setup-time auth failure. Serialize global auth-store merges under target-specific locks and preserve auth-to-shared lock ordering for profile OAuth refreshes.
Reserve API requests before their first await, include every drain-owned work type in runtime status, and pause local cron dispatch while a gateway drain is active.
The extracted normalize_skill_lookup_name() resolved trusted roots via
agent.skill_utils.get_skills_dir(), but skill_view() enforces
tools.skills_tool.SKILLS_DIR — a separate module attribute that callers
and 60+ existing tests patch directly. With the helper reading a
different symbol than the enforcer, any SKILLS_DIR patch (or future
divergence between the two resolvers) makes normalization disagree with
enforcement and absolute-path loads regress silently. Read SKILLS_DIR at
call time (deferred import, cycle-safe) with get_skills_dir() as the
fallback, and align the new tests to patch the enforced symbol.
Follow-up to the salvage of #59829 by @HexLab98.
Add unit tests for normalize_skill_lookup_name and a cron scheduler
regression that absolute paths under the skills dir reach skill_view as
relative lookups.
Defense-in-depth alongside the interpreter-shutdown guard: run_job closed
the cron agent's async resources (agent.close + cleanup_stale_async_clients)
in its finally block BEFORE run_one_job called _deliver_result, so a live
delivery could race a torn-down async client. run_job now accepts an optional
defer_agent_teardown holder; when set it hands the live agent back instead of
closing it, and run_one_job tears it down (via the extracted _teardown_cron_agent
helper) only AFTER delivery — in a finally so a failed run never leaks. Default
path (holder=None) is unchanged, so every existing caller keeps inline teardown.
Reorder approach based on #58777 by @LavyaTandel; reworked to keep a single
delivery site in run_one_job and add regression coverage.
Co-authored-by: LavyaTandel <lavya@loom.local>
The #22773 heuristic classified any telegram:<positive_chat_id>:<numeric_thread_id>
cron target as a Bot API channel Direct-Messages topic and routed it via
direct_messages_topic_id, which nulls message_thread_id. A normal forum-style
topic inside a private chat has the identical shape, so every such cron
delivery landed in General instead of the target thread (#52060). It also
means the only way to address a genuine channel DM topic was this same
ambiguous guess.
Disambiguate with the real runtime signal instead: probe the live adapter's
get_chat_info once and route via direct_messages_topic_id only when the chat
is actually a channel; everything else (private forum topic, forum supergroup,
group) and any probe failure fall back to message_thread_id — parity with
0.16.0 and with live reply routing. This fixes forum-topic delivery AND makes
genuine channel DM-topic cron delivery work correctly.
The standalone thread-pool fallback in _deliver_result() runs inside the
`except RuntimeError:` block (taken when asyncio.run() sees a running loop).
When future.result() raised there (SMTP ConnectionError, timeout, etc.), the
exception was NOT caught by the sibling `except Exception:` — it escaped
_deliver_result() and crashed the whole delivery loop, silently skipping every
remaining target. Multi-target delivery (e.g. deliver: 'email:a,email:b') is a
documented feature, so this broke a promised contract.
Wrap the fallback in its own try/except so a per-target failure is logged with
exc_info and the loop continues to the next target.
Fixes#47163
The in_channel surface DOES add a seed: _seed_cron_channel_session CREATES
the flat (platform, chat_id, None) session and mirrors the brief into it,
because mirror_to_session only APPENDS to an existing session and the flat
channel row is otherwise absent for a chat_postMessage delivery. Correct
the scheduler thread-skip comment and the test class docstring, which still
described the earlier 'let the existing mirror seed it' design.
Live testing exposed a real bug: an in_channel continuable cron delivered
flat to the channel (✅) but the reply did NOT continue the job — the bot
had no brief in context and confabulated the answer.
Root cause: mirror_to_session only APPENDS to a session that already
exists (_find_session_id → no-op when none matches); it never CREATEs one.
A flat (slack, chat_id, None) row is only created when a human posts a
top-level message the bot processes — a cron chat_postMessage delivery
never goes through the inbound handler, so the row is absent and the brief
is silently dropped. The prior impl relied on the bare mirror (F5/OQ-1
concluded "deletion only" — wrong).
Fix: _seed_cron_channel_session mirrors _seed_cron_thread_session —
get_or_create_session FIRST (chat_type = "dm" if is_dm else "group",
thread_id=None), keyed to the ORIGIN USER'S id, then mirror. The channel
session key embeds user_id (…:group:<chat>:<user>), so a system:cron id
would key the seed away from the reply; the origin user's id makes seed
key == inbound reply key. DM key ignores user_id but needs chat_type=dm
to match the prefix. Wired into the in_channel branch after delivery;
suppresses the generic mirror to avoid double-write.
DM validated (per request): the seeded key equals the inbound DM reply key
for a 1:1 DM; continuation works there too.
Tests:
- Rewrote the in_channel tests to use a real _session_store and the origin
user_id; assert get_or_create_session is called with the flat, correctly-
keyed source. Prove-fail: (a) reverting the create step and (b) seeding
with system:cron each turn a targeted test RED; restore → GREEN.
- +2 direct _seed_cron_channel_session unit tests asserting the KEY-MATCH
invariant (seed key == inbound reply key) via build_session_key, for both
channel and DM.
- Rewrote tests/manual/cron_inchannel_e2e.py to drive a REAL SessionStore +
real mirror_to_session + real _find_session_id + real build_session_key
(no session-layer mocks — the old mocked E2E is exactly why the bug
shipped). Asserts the brief lands in the transcript and the reply resolves
to the same session, for BOTH channel and 1:1 DM.
Full relevant sweep: 283 passed.
Add a per-platform `cron_continuable_surface` extra key
(`thread` default | `in_channel`) so a continuable cron job can deliver
FLAT into a Slack channel — no dedicated thread — and still be
replied-to. In `in_channel` mode the scheduler skips the thread-open
branch (leaves `thread_id=None`); the shipped origin-mirror then seeds
the `(slack, chat_id, None)` shared-channel session — the same bucket
`reply_in_thread: false` routes inbound channel replies to — so a plain
channel reply continues the job in context.
Design: specs/cron-inchannel-continuable (D1–D7, F5). Model B
(shared-channel session), NOT anchoring to the delivery `ts` — on Slack
replying to a specific message IS threading, so a `ts` anchor would only
relocate the thread, never deliver true threadless continuable.
- gateway/platforms/base.py: `supports_inchannel_continuable` capability
flag (default False → unsupported platforms fail SAFE to `thread`).
- plugins/platforms/slack/adapter.py: flag=True; `_cron_continuable_surface()`
resolver (coerces to the two-value enum); `_warn_if_inchannel_without_flat_reply`
connect-time warning (D5: warn, not hard-require — the misconfig fails safe).
- gateway/config.py: shared-key bridge line (top-level OR nested config).
- cron/scheduler.py: read the key generically from platform config, gate
the `in_channel` branch on the adapter capability flag, skip thread-open.
No new seed function (reuses the existing mirror — G6).
Pairing (docs): `in_channel` + `reply_in_thread: false` +
`require_mention: false` (or a free-response channel). Missing
`reply_in_thread: false` fails safe to a threaded continuation.
Gateway-side config flag — `/restart` to apply; NO Slack app reinstall.
Tests (from inside the worktree, PYTHONPATH=$PWD):
- +6 cron scheduler tests (in_channel skips thread-open; seeds flat
channel session with thread_id=None; thread-mode regression;
fail-safe on unsupported platform; value coercion). Prove-fail:
removing the `and not in_channel_surface` guard turns the two
load-bearing tests RED; restore → GREEN.
- +10 slack resolver/capability/warning tests; +2 config-bridge tests.
- tests/manual/cron_inchannel_e2e.py: offline E2E driving BOTH real
legs (delivery seed + inbound reply keying) → both converge on
(slack, C, None).
- No regressions: test_slack.py 216 passed alone; broader sweep green
(4 pre-existing cross-file-ordering failures reproduce identically on
pristine origin/main).
Docs: cron.md + slack.md + zh-Hans mirrors of both.
The TestRunJobSessionPersistence run_job tests shared a helper that returned
a positional list of patches; callers applied a hardcoded slice
(patches[0..N]). When the BSM-seam fix split one env patch into two, the list
grew and every caller's slice silently dropped resolve_runtime_provider off
the end. The tests still passed locally — a dev machine has ambient provider
state (seeded via the cron delivery-routing path's plugin discovery) that let
the real resolver succeed — but failed on CI's clean HOME where nothing seeds
a provider, so run_job raised AuthError and AIAgent was never constructed.
Fix: _run_job_patches is now a contextmanager that enters the whole patch
bundle via ExitStack and yields (fake_db, mock_agent_cls). A caller can no
longer drop a patch by index, so a future seam change can't reintroduce the
local-green/CI-red split. Behaviour and assertions unchanged; 577 cron tests
pass.
A finite one-shot cron job whose side effect kills the tick (gateway
suicide, OOM, segfault, hard-timeout) re-fired forever: mark_job_run —
which increments repeat.completed and removes the job — runs AFTER the
job, so an abrupt tick death never records completion and every
supervisor relaunch re-dispatches the job (#38758).
Commit the dispatch BEFORE the side effect:
- claim_dispatch() increments repeat.completed under the cross-process
jobs lock and persists it before run_job(), converting finite
one-shots from at-least-once to at-most-times.
- Called from run_one_job (the shared body used by BOTH the built-in
ticker and the external Chronos fire_due path) before run_job.
- mark_job_run skips the increment for pre-claimed one-shots (no
double-count) and still removes at the limit.
- get_due_jobs drops a stale one-shot already at its dispatch limit so
a job claimed-but-not-cleaned-up after a crash stops appearing as due.
- No-op for recurring jobs (advance_next_run) and infinite/no-repeat
one-shots; a handed-in job dict absent from the store proceeds.
Closes#38758
Cron's job runner was the last entry point still reading
fallback_providers/fallback_model as an either/or, silently dropping the
legacy fallback_model when fallback_providers was set. Every other entry
point (cli, gateway, oneshot, fallback_cmd, tui_gateway, auxiliary_client)
already merges both keys via get_fallback_chain(). This aligns cron with
them at both call sites: the auth-fallback resolution loop and the
AIAgent(fallback_model=...) argument.
Co-authored-by: xxxigm <tuancanhnguyen706@gmail.com>
Migrating the scheduler-reload seam from a single dotenv.load_dotenv patch to
two patches (load_hermes_dotenv + reset_secret_source_cache) lengthened the
positional list _make_run_job_patches returns, so the 4 callers that applied
patches[0..4] silently dropped the resolve_runtime_provider patch (now at [5]).
Under CI's hermetic env (all API keys blanked) auth then failed and AIAgent was
never constructed → 'NoneType has no attribute kwargs'. Callers now apply
patches[0..5]. Passed locally (keys present) but failed on CI shard 5/8.
Two live cron bugs, both surfaced by @banditburai in #35616 (whose larger
watchdog/supervisor work is already superseded by the CronScheduler provider
refactor on main):
- #32896: `cron list` crashed on a present-but-null `deliver` field —
`job.get("deliver", ["local"])` returns None for an explicit null, which
then hit `", ".join(None)`. Coalesce with `or ["local"]` (same pitfall
the sibling `repeat` line already guards against).
- #33465: cron jobs 401'd on Bitwarden/BSM-backed secrets. The per-run env
reload used a bare `load_dotenv(override=True)`, which re-applied only the
.env placeholder — startup had already recorded this HERMES_HOME in
env_loader._APPLIED_HOMES, so the external-secret re-pull no-oped. Route the
reload through load_hermes_dotenv() and call reset_secret_source_cache()
first to force the re-pull (Bitwarden's 300s value-cache keeps it off the
network; override honours secrets.bitwarden.override_existing, mirroring
startup).
Tests: null-deliver regression guard in test_cron.py; reset-before-reload
ordering guard in test_scheduler.py. Migrated 31 scheduler-reload test seams
from patching dotenv.load_dotenv to the new load_hermes_dotenv /
reset_secret_source_cache seam.
Scheduled jobs delivering to Telegram/etc. started posting a literal
'⚠️ No reply: the model returned empty content…' message instead of
staying silent. Two interacting causes:
1. The turn-completion explainer (#34452) replaces an empty model turn
with a user-facing '⚠️ No reply…' string. In a cron context that is
not a silence marker, so the scheduler delivered it — a regression
from the previously-silent empty turn. run_job now detects the
explainer text deterministically (via the same formatter that
produced it) for abnormal-empty turn_exit_reasons and strips it to
empty, so the existing empty-response suppression + soft-fail guard
apply. The explainer is unchanged on CLI/gateway.
2. The cron suppression used a loose 'SILENT_MARKER in ...upper()'
substring check. It leaked bracketless near-markers the model emits
('SILENT', 'NO_REPLY', 'NO REPLY' — #51438, #46917) and wrongly
swallowed a real report that merely quoted '[SILENT]' mid-sentence.
Replaced with _is_cron_silence_response(): suppresses a canonical
token as the whole response, its own first/last line, or the
documented bracketed '[SILENT] <note>' prefix — while a token buried
mid-sentence in a genuine report is delivered. Preserves the
intentional cron trailing/prefix tolerance (existing tests unchanged).
Tests: bracketless-variant suppression, mid-sentence-quote delivery,
direct matcher contract, and explainer-strip + defensive real-report
delivery.
Addresses review on #51077 (kxee). The continuable-cron mirror reused
gateway.mirror.mirror_to_session, which writes role=assistant — re-
introducing the exact alternation violation #2313 (37a997945)
deliberately removed: a cron brief landing as assistant after the
agent's last turn yields assistant->assistant, which breaks strict-
alternation providers (OpenAI/OpenRouter) per issue #2221. The mirror/
mirror_source metadata is also dropped at the SQLite boundary, so the
[Delivered from cron] label is lost on replay.
This is an intentional, opt-in (default OFF) reversal of #2313's
'cron output does not belong in interactive history' for the reply-to-
cron use case — gated behind cron.mirror_delivery / attach_to_session.
Fixes:
- mirror_to_session gains a role param (default 'assistant' — interactive
send_message mirror unchanged, it IS the agent speaking). Cron paths
pass role='user' with a '[Cron delivery: <task>]' prefix so the brief
collapses via repair_message_sequence's consecutive-user merge on every
provider, and stays distinguishable on replay despite the metadata drop.
- thread_seeded: defer seeding + the flag until delivery into the new
thread actually succeeds. Previously set pre-delivery, so an open-
succeeds / deliver-fails case both stranded a seeded-but-unseen brief
AND suppressed the DM-fallback mirror.
- seed mirror now passes user_id='system:cron' to resolve the exact
thread-keyed session row it just created.
- dedupe the duplicate BasePlatformAdapter import in _deliver_result.
- trim oversized docstrings to non-obvious WHY (AGENTS.md).
- docs: document cron.mirror_delivery / attach_to_session in
website/docs/user-guide/features/cron.md.
- test: assert the cron mirror writes role='user' with the label prefix.
204 cron+mirror tests pass.
Continuable cron jobs (attach_to_session / cron.mirror_delivery, default
OFF) now prefer a dedicated thread on thread-capable platforms, falling
back to origin-DM mirroring where threads don't exist.
- Thread-capable (Telegram topics, Discord/Slack threads): open a fresh
thread for the job via the shipped adapter.create_handoff_thread,
route the brief into it, and seed the thread-keyed session so the
user's in-thread reply continues with full context. This is the
'continuable cron opens its own thread' interface.
- DM-only (WhatsApp/Signal/SMS): create_handoff_thread returns None ->
fall back to mirroring into the origin DM session (existing behaviour).
Reuses existing infrastructure end-to-end — no new adapter surface, no
provider-chain signature change:
- adapter.create_handoff_thread (already implemented per-platform,
returns None on unsupported platforms = the fallback signal)
- the live SessionStore via adapter._session_store (already set on every
adapter), reached without threading a new param through the frozen
CronScheduler.start() contract
- gateway.mirror.mirror_to_session for the seed/append
- existing per-target delivery routing carries the new thread_id for free
Mirrors GatewayRunner._process_handoff's open-thread-or-fallback +
seed pattern, standalone for the cron delivery path. thread_seeded
guards against a double-mirror after seeding. Scoped to the origin
target only; fan-out/broadcast targets are never threaded or mirrored.
Config docs updated (cron.mirror_delivery) + cronjob tool
attach_to_session description reframed around continuable/thread-preferred.
Tests: +5 (thread id returned on thread platform; None on DM platform;
None without capability/loop; seed creates thread session + mirrors;
seed no-op on empty). 22/22 in TestCronDeliveryMirror; 532 cron tests
pass (4 failures pre-existing: croniter-not-installed + TZ).
Multi-participant parity with interactive send_message, which passes
HERMES_SESSION_USER_ID to gateway.mirror.mirror_to_session so the mirror
lands in the exact participant's session.
- cronjob_tools._origin_from_env now captures user_id from the session
context at job-create time (alongside platform/chat_id/thread_id).
- _maybe_mirror_cron_delivery forwards user_id to mirror_to_session.
- _deliver_result threads origin.user_id through for the origin target.
Effect: in a per-user-isolated group chat (group_sessions_per_user=True,
the default), the mirror resolves to the member who scheduled the job
instead of conservatively no-op'ing on ambiguous candidates. DMs and
shared group/thread sessions are unaffected (single candidate). Default
still OFF.
Tests: helper forwards user_id; E2E _deliver_result forwards origin
user_id. 17/17 in TestCronDeliveryMirror; 527 cron tests pass (4 failures
pre-existing: croniter-not-installed + TZ, identical on baseline).
The cron->session mirror now fires ONLY for the delivery target that
equals the job's origin (platform+chat_id[+thread_id]). A job created
from a live gateway chat stamps that chat as origin, and that session is
guaranteed to exist (it is the conversation the user scheduled the job
in). Fan-out / broadcast / home-channel-fallback targets are never
mirrored: they are not a continuation of a conversation and may have no
session at all.
This makes the prior 'cold-start session seeding' concern a non-case by
construction: when the mirror semantically applies the session exists;
when none exists the target was never the origin, so we no-op.
Adds _target_matches_origin() + origin-scoping tests (exact match,
other-chat/other-platform/no-origin rejection, thread scoping, fan-out
mirrors only the origin target).
Adds an opt-in path so a cron job's delivered output is also appended to
the TARGET chat's gateway session transcript (as an assistant turn), so a
user reply to a recurring delivery (daily brief, reminder) is answered with
the delivery in context instead of 'what is that?' amnesia.
- Reuses the shipped gateway.mirror.mirror_to_session — the same primitive
interactive send_message mirroring already uses. No messaging-toolset
change (cron still can't call send_message; this rides delivery).
- Gated: per-job attach_to_session overrides global cron.mirror_delivery
(config.yaml). Default OFF — historical isolation preserved byte-for-byte.
- Mirrors the CLEAN agent output, not the cron header/footer wrapper.
- Alternation/cache-safe: append lands at a turn boundary, never mid-loop,
never mutates the cached system prompt. Cold-start (no target session)
is a silent no-op; mirror errors never fail a successful delivery.
- Surfaced on the cronjob tool (attach_to_session) + config schema.
Driven by enterprise cron-as-control-plane use case. 10 new tests; full
cron + cronjob-tool suites pass (600).
A cron job that sets `enabled_toolsets` to a list of *native* toolsets (e.g.
`["web", "terminal"]`) silently got ZERO MCP tools, while a job with no
per-job list got every globally-enabled MCP server. `_resolve_cron_enabled_
toolsets` returned the per-job list verbatim, bypassing the MCP-merge that the
platform-fallback branch performs via `_get_platform_tools`. So
`discover_mcp_tools()` registered the MCP tools into the registry, but
`get_tool_definitions(enabled_toolsets=...)` kept only the named native
toolsets — the agent then rejected every `mcp_*` call as "Unknown tool". (R2
of #23997.)
Fix: `_merge_mcp_into_per_job_toolsets` layers MCP membership onto a per-job
allowlist with the SAME semantics as `_get_platform_tools`:
* `no_mcp` sentinel present -> no MCP servers (sentinel stripped)
* one or more MCP server names already listed -> treat as an allowlist
* otherwise -> union in every globally-enabled MCP server
To avoid duplicating the "which MCP servers are enabled" computation (it
already existed inline in `_get_platform_tools`), this extracts a shared
`enabled_mcp_server_names(config)` helper in `hermes_cli.tools_config` and has
BOTH the gateway/CLI platform resolver and the cron per-job resolver call it —
so every path agrees on MCP membership (extend, don't duplicate).
Note: the issue's *headline* — bare MCP server names rejected, registry never
includes them — was already fixed on main (commits c10fea8d2 + 04918345e,
both before the issue was filed). This PR closes the remaining cron-specific
gap (R2). The `server:*` / `mcp:server` alias-notation rejection (R1) and the
quiet-mode silent-drop (R3) are tracked separately.
Salvaged from #32788 by sherman-yang (credited below). Reworked to reuse the
shared `enabled_mcp_server_names` helper instead of re-implementing the MCP
membership set in cron/scheduler.py.
Fixes#23997
Co-authored-by: sherman-yang <58446328+sherman-yang@users.noreply.github.com>
PR #22410 added three-mode Telegram topic routing to the live message path
(TelegramAdapter.send via the gateway DeliveryRouter), but the cron delivery
path never got it. cron/scheduler.py::_deliver_result sent through the live
adapter with a bare ``{"thread_id": ...}`` and fell back to the standalone
_send_telegram, neither of which addresses Bot API Direct Messages topics
correctly. After Bot API 10.0 (2026-05-08), sending to a private chat with a
bare ``message_thread_id`` is rejected/mis-routed, so cron deliveries to a
private DM topic landed in the General topic instead of the requested lane.
Fix: the cron live-adapter branch now routes the text send through the
gateway's ``DeliveryRouter._deliver_to_platform`` — the same canonical path
live messages use — so it inherits all three Telegram routing modes:
1. Forum/supergroup (negative chat_id) -> message_thread_id
2. Bot API DM topics (private chat_id + numeric topic id) ->
direct_messages_topic_id (the case #22773 reported)
3. Hermes-created named private DM-topic lanes -> ensure_dm_topic +
reply anchor
For mode 2, a private-chat target with a numeric topic id is passed as
``direct_messages_topic_id`` metadata (verified end-to-end:
TelegramAdapter._thread_kwargs_for_send turns it into
``{message_thread_id: None, direct_messages_topic_id: <int>}``), instead of a
bare message_thread_id. Forum/supergroup and home-channel deliveries are
unchanged. The standalone fallback (gateway down) is preserved.
No new config knob and no duplicated routing logic — this reuses the existing
DeliveryRouter rather than reimplementing topic routing in the cron path.
Salvaged from #42051 (stepanov1975) and #23249 (devsart95), which both
diagnosed the missing three-mode routing in the cron/standalone path;
reimplemented onto the canonical DeliveryRouter that landed since those PRs
were opened.
Co-authored-by: Alex <9785479+stepanov1975@users.noreply.github.com>
Co-authored-by: devsart95 <devsart95@gmail.com>
Consolidates three cron-delivery defects in cron/scheduler.py::_deliver_result
that all stem from how the live-adapter send result is interpreted.
#38922 — duplicate message on confirmation timeout.
future.result(timeout=60) raising TimeoutError bubbled to the outer
except handler, which left delivered=False, so `if not delivered:` re-sent
the identical message via the standalone path. future.cancel() cannot
un-send a request already in flight on the wire, so a slow confirmation
deterministically produced a duplicate. The send was already dispatched onto
the gateway loop, so a bare timeout is now treated as delivered
(assume-delivered is safer than guaranteed-duplicate) and the standalone
fallback is skipped. The live-adapter media attempt is also skipped on
timeout since the contended loop would re-block each 30s media budget.
#47056 — silent drop when the gateway has an active session.
The old check `if send_result is None or not getattr(send_result,
"success", True)` let a result object missing a `success` attribute default
to True = counted as a successful delivery, so the scheduler logged
"delivered via live adapter" while the gateway never processed the message.
Delivery is now confirmed via _confirm_adapter_delivery(): only an explicit,
truthy `success` attribute counts; None or a `success`-less object falls
through to the standalone path so the message actually arrives.
A genuine send Exception (not a slow confirmation) still falls through to
the standalone path, and is caught by run_job's outer handler — it is
recorded as the job's last_error and never crashes the cron ticker.
#43014 — deliver=origin fails to resolve in CLI sessions.
A CLI-created job has no {platform, chat_id} origin, so deliver=origin (and
auto-detect / deliver=None) was unresolvable and emitted "no delivery target
resolved" on every run. An unresolvable origin with no configured home
channel is now treated as local (output stays in last_output), matching the
documented auto-deliver contract; a concrete unresolvable platform target
still reports a real error.
Salvaged from #41007 (timeout discriminator), folding in #47127's
_confirm_adapter_delivery hardening and #38937 / #43063's origin→local
fallback. Tests rewritten as behavior contracts (timeout => no duplicate;
None / success-less result => standalone fallback; confirmed success => no
fallback; CLI origin => local, explicit platform => still errors).
Co-authored-by: Evi Nova <66773372+Tranquil-Flow@users.noreply.github.com>
Co-authored-by: kyssta-exe <kyssta-exe@users.noreply.github.com>
Cron jobs created without an explicit `model` are stored as `model: null`.
At fire time `run_job` resolved `model = job.get("model") or os.getenv(
"HERMES_MODEL") or ""` and then `_model_cfg.get("default", model)`, so when
config.yaml had no `model.default` (or `model: {default: null}`) an empty
string flowed straight to the provider and surfaced as an opaque HTTP 400
("Model parameter is required" / "model: String should have at least 1
character"). The operator had to inspect jobs.json to discover the job was
stored with a null model.
This change makes cron model resolution robust and symmetric with the CLI:
- Coerce `model: null`/missing config to `{}` so a falsy default never
overwrites an already-resolved env value with `None`.
- Only overwrite `model` from `model.default` when the resolved value is
truthy; accept a `model.model` alias key, mirroring the sibling resolvers
in hermes_cli/oneshot.py, fallback_cmd.py and prompt_size.py.
- Resolve AFTER the managed-scope overlay so an administrator-pinned model
still wins.
- Fail fast with an actionable error (caught by run_job's outer handler and
recorded as the job's last_error — the cron ticker is unaffected) instead
of letting an empty model reach the API.
- The per-job model is re-read every tick, so a `cronjob action=update
model=...` after a failed run takes effect on the next tick (no cache).
Adds tests/cron/conftest.py pinning a default HERMES_MODEL so existing
run_job tests don't trip the new guard, plus regression tests covering env
fallback, config.default fallback, string-form config, the model alias key,
null-default-no-clobber, corrupt-config graceful degradation, fail-fast,
and the no-cache re-read property.
Salvaged from #24005, rebased onto current main, with additional test
coverage folded in from #45550 and the alias-key behavior from #43952.
Fixes#43899Fixes#23979Fixes#22761
Co-authored-by: szzhoujiarui-sketch <szzhoujiarui@gmail.com>
Co-authored-by: rayjun <rayjun0412@gmail.com>
Fully removes the cron per-job 'profile' arg added in #28124: the
cronjob tool schema field, CLI --profile flags on cron create/edit,
job-record storage/validation, the scheduler's _job_profile_context
wrapper, and the script-runner env override. Sequential-partition
logic reverts to workdir-only.
The context-local HERMES_HOME override in hermes_constants and the
subprocess bridging in tools/environments/local.py are kept — they
now have other consumers (dashboard multi-profile, TUI gateway).
A cron session's first message is the injected "[IMPORTANT: you are running as
a scheduled cron job …]" delivery hint, so with no explicit title the sidebar
and history rows fell back to that hint as their label.
Set the session title from the job (name → short prompt → id) with a run-time
suffix for uniqueness against the sessions.title index. Done after the run so
the agent's own INSERT keeps model/system_prompt — this only updates the title.
* fix: respect disabled auto-compaction on context overflow
Port from anomalyco/opencode#30749.
When compression.enabled is false, NO automatic compaction trigger may
fire. The proactive token-threshold paths (preflight + post-response
should_compress gate) already honoured the setting, but the three
provider-overflow recovery paths in the agent loop — long-context-tier
429, 413 payload-too-large, and context-overflow — called
_compress_context() unconditionally, silently compressing and rotating
the session against the user's explicit choice.
Add a single guard at the top of the overflow-recovery dispatch: when
compression is disabled and the error is one of those three overflow
classes, surface a terminal error (compaction_disabled: True) telling the
user to /compress manually, /new, switch to a larger-context model, or
reduce attachments. Manual /compress (force=True) is unaffected — it never
enters this loop.
Tests: new TestOverflowWithCompactionDisabled (413 + 400 overflow don't
compress when disabled; control case still compresses when enabled).
Existing overflow-recovery tests updated to enable compaction explicitly
(they verify the recovery fires); fixture defaults flipped to True to
match production (compression.enabled defaults to True).
* fix(dashboard): populate cron delivery dropdown from configured platforms
The dashboard cron-create/edit dropdown hardcoded five delivery options
(local, telegram, discord, slack, email), so users on Matrix — or any
other backend-supported platform — had no way to pick their channel even
though the cron scheduler delivers to all of them. It also offered
Telegram/Discord/etc. to users who never set those up.
- cron/scheduler.py: add cron_delivery_targets() — the single source of
truth. Intersects gateway-configured platforms with cron-deliverable
ones and reports whether each platform's home channel is set.
- web_server.py: GET /api/cron/delivery-targets exposes that list (+ the
implicit local option) to the dashboard.
- CronPage.tsx: both modals render options from the endpoint. Configured
platforms missing a home channel still appear, annotated "set a home
channel first" (option B), so the user knows what to fix. Edit modal
preserves a job's current target even if it's no longer configured.
Local-only state shows a "configure a platform under Channels" hint.
Validation: scheduler + endpoint E2E'd with a Matrix gateway (home set
and unset); 5 new tests; tests/cron + tests/hermes_cli/test_web_server
green (366 passed).
Remove unused imports (F401) and duplicate/shadowed import
redefinitions (F811) across the codebase using ruff's safe
autofixes. No behavioral changes -- imports only.
- ~1400 safe autofixes applied across 644 files (net -1072 lines)
- __init__.py re-exports preserved (excluded from F401 removal so
public re-export surfaces stay intact)
- Re-exports that are imported or monkeypatched by tests but look
unused in their defining module are kept with explicit # noqa:
F401 (gateway/run.py load_dotenv; run_agent re-exports from
agent.message_sanitization, agent.context_compressor,
agent.retry_utils, agent.prompt_builder, agent.process_bootstrap,
agent.codex_responses_adapter)
- Unsafe F841 (unused-variable) fixes deliberately skipped -- those
can change behavior when the RHS has side effects
- ruff lints remain disabled in pyproject.toml (only PLW1514 is
selected); this is a one-time cleanup, not a config change
Verification:
- python -m compileall: clean
- pytest --collect-only: all 27161 tests collect (zero import errors)
- core entry points import clean (run_agent, model_tools, cli,
toolsets, hermes_state, batch_runner, gateway)
- static scan: every name any test imports directly from an edited
module still resolves
Two unrelated transient failures on PR #33661's initial CI run, both
pre-existing on main and recovered on rerun. Hardening:
1. tests/cron/test_scheduler.py::TestRunJobConfigLogging — added mocks for
resolve_runtime_provider() and discover_mcp_tools(). The yaml-warning
tests intend to exercise only the warning-log path, but
_run_job_impl continues into provider resolution and MCP discovery
after the warning. Both can spawn subprocesses / hit the network and
pushed the test over its 30s budget under GHA load.
2. tests/tools/test_browser_supervisor.py — wrapped Chrome teardown
against the stdlib subprocess._wait() race (bpo-38630). When SIGCHLD
arrives during proc.wait(), _try_wait(WNOHANG) can return a foreign
pid and the 'assert pid == self.pid or pid == 0' fires. Fixture now
catches AssertionError/TimeoutExpired, force-kills, and always reaps
so no zombie escapes. Same hardening applied to the early-skip branch.
The bug: cron/scheduler.py:_resolve_cron_enabled_toolsets returns an
LLM-supplied per-job enabled_toolsets verbatim. The disabled_toolsets
passed to AIAgent was a hardcoded [cronjob, messaging, clarify] that
ignored agent.disabled_toolsets from config.yaml. An LLM could call
cronjob(action='add', enabled_toolsets=['terminal','file'],
prompt='...') and the cron-spawned agent would receive terminal+file
even when the operator had globally disabled them.
Fix: new _resolve_cron_disabled_toolsets() helper that ALWAYS layers
agent.disabled_toolsets on top of the cron baseline. AIAgent's
disabled_toolsets takes precedence over enabled_toolsets, so this
stops the bypass regardless of what the per-job override contains.
This is the disabled-side fix. Three concurrent PRs (#25842, #25815,
#25780) proposed intersection-side variants on _resolve_cron_enabled_toolsets;
this fix is more robust because it stops the leak at the precedence
boundary AIAgent itself enforces, not at a layer above.
Regression test reproduces the issue's PoC exactly:
config.yaml has agent.disabled_toolsets=[terminal,file]; cron job has
enabled_toolsets=[web,terminal,file]; assertion: AIAgent receives
disabled_toolsets containing terminal AND file.
Salvaged from PR #25786 by @Schrotti77. Simplified the implementation:
dropped a 23-line _normalize_toolset_list() helper (handled str/tuple/
set/garbage input shapes) in favor of the existing convention
(agent_cfg.get('disabled_toolsets') or []) used elsewhere in the
codebase. YAML always parses these as lists; the elaborate normalizer
was theatre for shapes we never produce.
Closes#25752
Co-authored-by: teknium1 <127238744+teknium1@users.noreply.github.com>
Add an official, production-grade WhatsApp integration via Meta's
Business Cloud API as a complement to the existing Baileys bridge.
No bridge subprocess, no QR codes, no account-ban risk — at the cost
of a Meta Business account and a public HTTPS webhook URL.
Setup is fully wizard-driven: 'hermes whatsapp-cloud' walks through
every credential with paste-time validation (catches the #1 trap of
pasting a phone number into the Phone Number ID field), generates a
verify token, and ends with copy-paste instructions for the
cloudflared / Meta-dashboard / Business Manager pieces that can't be
automated. The wizard also points users at Meta's Business Manager
for setting the bot's display name and profile picture.
Feature set:
- Inbound: text, images (with native-vision routing), voice notes
(STT), documents (small text inlined, larger cached), reply context.
- Outbound: text with WhatsApp-flavored markdown conversion, images,
videos, documents, opus voice notes via ffmpeg with MP3 fallback.
- Native interactive buttons for clarify, dangerous-command approval,
and slash-command confirmation flows — matches the Telegram /
Discord UX, graceful degrades to plain text.
- Read receipts (blue double-checkmarks) and typing indicator,
using Meta's combined endpoint so they fire in a single API call.
- Webhook security: X-Hub-Signature-256 HMAC verification (raw body,
constant-time), wamid deduplication, group-shaped-message refusal
(groups deferred to v2 — Baileys still covers them).
- Full integration with the gateway's session, cron, display-tier,
prompt-hint, and auth-allowlist systems. Cloud and Baileys can run
side-by-side against different phone numbers.
Also wires STT (speech-to-text) through Nous's managed audio gateway
for Nous subscribers — previously the default stt.provider=local
required a separate faster-whisper install. New subscribers now get
voice-note transcription out of the box.
Docs: 418-line user guide at website/docs/user-guide/messaging/
whatsapp-cloud.md, sidebar entry, environment-variables reference,
ADDING_A_PLATFORM.md updated with the optional interactive-UX
contract for future adapter authors.
Tests: 100 dedicated tests for the adapter, 32 for the setup wizard,
20 for the Nous subscription STT wiring, plus regression coverage
across display_config, prompt_builder, and the cron scheduler.
Known limitations (deferred until clear demand signal):
- Group chats — use the Baileys bridge if you need them.
- Message templates for 24-hour-window outside-conversation sends —
reactive chat is unaffected; cron / delegate_task with gaps > 24h
will fail with a clear error. The agent's system prompt warns the
model about this so it knows to mention it when scheduling delayed
messages.
When Telegram topic mode is enabled, cron messages delivered to the bot's
root DM (TELEGRAM_HOME_CHANNEL without a thread id) land in the system
lobby — replies there are rebuffed with the lobby reminder and
reply_to_message_id is dropped, so users cannot interact with the cron
output (#24409).
Add an optional TELEGRAM_CRON_THREAD_ID env var that overrides
TELEGRAM_HOME_CHANNEL_THREAD_ID for cron deliveries only. Operators can
create a "Cron" forum topic in the DM, point this var at its thread id,
and replies to cron messages will land in that topic's existing session
instead of the lobby. The home-channel thread id (used elsewhere, e.g.
restart notifications) is unchanged, and explicit
deliver="telegram:chat:thread" targets continue to win over the env var.
Per the reporter's clarification on 2026-05-13, option (a) (cron-side
route to a dedicated topic + config knob) was chosen.
Fixes#24409
