Feishu approval clicks need the resolved card to come back from the
synchronous callback path itself. Leaving approval resolution to the
generic asynchronous card-action flow made button feedback depend on
later loop work instead of the callback response the client is waiting
for.
Change-Id: I574997cbbcaa097fdba759b47367e28d1b56b040
Constraint: Feishu card-action callbacks must acknowledge quickly and reflect final approval state from the callback response path
Rejected: Keep approval handling on the generic async card-action route | leaves card state synchronization vulnerable to callback timing and follow-up update ordering
Confidence: high
Scope-risk: narrow
Reversibility: clean
Directive: Keep approval callback response construction separate from async queue unblocking unless Feishu callback semantics change
Tested: pytest tests/gateway/test_feishu.py tests/gateway/test_feishu_approval_buttons.py tests/gateway/test_approve_deny_commands.py tests/gateway/test_slack_approval_buttons.py tests/gateway/test_telegram_approval_buttons.py -q
Not-tested: Live Feishu workspace end-to-end callback rendering
Three fixes for gateway lifecycle stability:
1. Notify active sessions before shutdown (#new)
When the gateway receives SIGTERM or /restart, it now sends a
notification to every chat with an active agent BEFORE starting
the drain. Users see:
- Shutdown: 'Gateway shutting down — your task will be interrupted.'
- Restart: 'Gateway restarting — use /retry after restart to continue.'
Deduplicates per-chat so group sessions with multiple users get
one notification. Best-effort: send failures are logged and swallowed.
2. Skip .clean_shutdown marker when drain timed out
Previously, a graceful SIGTERM always wrote .clean_shutdown, even if
agents were force-interrupted when the drain timed out. This meant
the next startup skipped session suspension, leaving interrupted
sessions in a broken state (trailing tool response, no final message).
Now the marker is only written if the drain completed without timeout,
so interrupted sessions get properly suspended on next startup.
3. Post-restart health check for hermes update (#6631)
cmd_update() now verifies the gateway actually survived after
systemctl restart (sleep 3s + is-active check). If the service
crashed immediately, it retries once. If still dead, prints
actionable diagnostics (journalctl command, manual restart hint).
Also closes#8104 — already fixed on main (the /restart handler
correctly detects systemd via INVOCATION_ID and uses via_service=True).
Test plan:
- 6 new tests for shutdown notifications (dedup, restart vs shutdown
messaging, sentinel filtering, send failure resilience)
- Existing restart drain + update tests pass (47 total)
Follow-up for cherry-picked PR #9746 — three pre-existing tests used
adapter._webhook_url (bare URL) in mock data, but _register_webhook
and _unregister_webhook now compare against _webhook_register_url
(password-bearing URL). Updated to match.
When BlueBubbles posts webhook events to the adapter, it uses the exact
URL registered via /api/v1/webhook — and BB's registration API does not
support custom headers. The adapter currently registers the bare URL
(no credentials), but then requires password auth on inbound POSTs,
rejecting every webhook with HTTP 401.
This is masked on fresh BB installs by a race condition: the webhook
might register once with a prior (possibly patched) URL and keep working
until the first restart. On v0.9.0, _unregister_webhook runs on clean
shutdown, so the next startup re-registers with the bare URL and the
401s begin. Users see the bot go silent with no obvious cause.
Root cause: there's no way to pass auth credentials from BB to the
webhook handler except via the URL itself. BB accepts query params and
preserves them on outbound POSTs.
## Fix
Introduce `_webhook_register_url` — the URL handed to BB's registration
API, with the configured password appended as a `?password=<value>`
query param. The existing webhook auth handler already accepts this
form (it reads `request.query.get("password")`), so no change to the
receive side is needed.
The bare `_webhook_url` is still used for logging and for binding the
local listener, so credentials don't leak into log output. Only the
registration/find/unregister paths use the password-bearing form.
## Notes
- Password is URL-encoded via urllib.parse.quote, handling special
characters (&, *, @, etc.) that would otherwise break parsing.
- Storing the password in BB's webhook table is not a new disclosure:
anyone with access to that table already has the BB admin password
(same credential used for every other API call).
- If `self.password` is empty (no auth configured), the register URL
is the bare URL — preserves current behavior for unauthenticated
local-only setups.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
BlueBubbles v1.9+ webhook payloads for new-message events do not always
include a top-level chatGuid field on the message data object. Instead,
the chat GUID is nested under data.chats[0].guid.
The adapter currently checks five top-level fallback locations (record and
payload, snake_case and camelCase, plus payload.guid) but never looks
inside the chats array. When none of those top-level fields contain the
GUID, the adapter falls through to using the sender's phone/email as the
session chat ID.
This causes two observable bugs when a user is a participant in both a DM
and a group chat with the bot:
1. DM and group sessions merge. Every message from that user ends up with
the same session_chat_id (their own address), so the bot cannot
distinguish which thread the message came from.
2. Outbound routing becomes ambiguous. _resolve_chat_guid() iterates all
chats and returns the first one where the address appears as a
participant; group chats typically sort ahead of DMs by activity, so
replies and cron messages intended for the DM can land in a group.
This was observed in production: a user's morning brief cron delivered to
a group chat with his spouse instead of his DM thread.
The fix adds a single fallback that extracts chat_guid from
record["chats"][0]["guid"] when the top-level fields are empty. The chats
array is included in every new-message webhook payload in BB v1.9.9
(verified against a live server). It is backwards compatible: if a future
BB version starts including chatGuid at the top level, that still wins.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When GATEWAY_PROXY_URL (or gateway.proxy_url in config.yaml) is set,
the gateway becomes a thin relay: it handles platform I/O (encryption,
threading, media) and delegates all agent work to a remote Hermes API
server via POST /v1/chat/completions with SSE streaming.
This enables the primary use case of running a Matrix E2EE gateway in
Docker on Linux while the actual agent runs on the host (e.g. macOS)
with full access to local files, memory, skills, and a unified session
store. Works for any platform adapter, not just Matrix.
Configuration:
- GATEWAY_PROXY_URL env var (Docker-friendly)
- gateway.proxy_url in config.yaml
- GATEWAY_PROXY_KEY env var for API auth (matches API_SERVER_KEY)
- X-Hermes-Session-Id header for session continuity
Architecture:
- _get_proxy_url() checks env var first, then config.yaml
- _run_agent_via_proxy() handles HTTP forwarding with SSE streaming
- _run_agent() delegates to proxy path when URL is configured
- Platform streaming (GatewayStreamConsumer) works through proxy
- Returns compatible result dict for session store recording
Files changed:
- gateway/run.py: proxy mode implementation (~250 lines)
- hermes_cli/config.py: GATEWAY_PROXY_URL + GATEWAY_PROXY_KEY env vars
- tests/gateway/test_proxy_mode.py: 17 tests covering config
resolution, dispatch, HTTP forwarding, error handling, message
filtering, and result shape validation
Closes discussion from Cars29 re: Matrix gateway mixed-mode issue.
During rapid tool-calling, the model often emits 1-2 tokens before
switching to tool calls. The stream consumer would create a new message
with 'X ▉' (short text + cursor), and if the follow-up edit to strip
the cursor was rate-limited by the platform, the cursor remained as
a permanent standalone message — reported on Telegram as 'white box'
artifacts.
Add a minimum-content guard in _send_or_edit: when creating a new
standalone message (no existing message_id), require at least 4
visible characters alongside the cursor before sending. Shorter text
accumulates into the next streaming segment instead.
This prevents cursor-only 'tofu' messages across all platforms without
affecting normal streaming (edits to existing messages, final sends
without cursor, and messages with substantial text are all unaffected).
Reported by @michalkomar on X.
Production fixes:
- Add clear_session_context() to hermes_logging.py (fixes 48 teardown errors)
- Add clear_session() to tools/approval.py (fixes 9 setup errors)
- Add SyncError M_UNKNOWN_TOKEN check to Matrix _sync_loop (bug fix)
- Fall back to inline api_key in named custom providers when key_env
is absent (runtime_provider.py)
Test fixes:
- test_memory_user_id: use builtin+external provider pair, fix honcho
peer_name override test to match production behavior
- test_display_config: remove TestHelpers for non-existent functions
- test_auxiliary_client: fix OAuth tokens to match _is_oauth_token
patterns, replace get_vision_auxiliary_client with resolve_vision_provider_client
- test_cli_interrupt_subagent: add missing _execution_thread_id attr
- test_compress_focus: add model/provider/api_key/base_url/api_mode
to mock compressor
- test_auth_provider_gate: add autouse fixture to clean Anthropic env
vars that leak from CI secrets
- test_opencode_go_in_model_list: accept both 'built-in' and 'hermes'
source (models.dev API unavailable in CI)
- test_email: verify email Platform enum membership instead of source
inspection (build_channel_directory now uses dynamic enum loop)
- test_feishu: add bot_added/bot_deleted handler mocks to _Builder
- test_ws_auth_retry: add AsyncMock for sync_store.get_next_batch,
add _pending_megolm and _joined_rooms to Matrix adapter mocks
- test_restart_drain: monkeypatch-delete INVOCATION_ID (systemd sets
this in CI, changing the restart call signature)
- test_session_hygiene: add user_id to SessionSource
- test_session_env: use relative baseline for contextvar clear check
(pytest-xdist workers share context)
- Add Platform.QQBOT to _UPDATE_ALLOWED_PLATFORMS (enables /update command)
- Add 'qqbot' to webhook cross-platform delivery routing
- Add 'qqbot' to hermes dump platform detection
- Fix test_name_property casing: 'QQBot' not 'QQBOT'
- Add _parse_qq_timestamp() for ISO 8601 + integer ms compatibility
(QQ API changed timestamp format — from PR #2411 finding)
- Wire timestamp parsing into all 4 message handlers
- Rename platform from 'qq' to 'qqbot' across all integration points
(Platform enum, toolset, config keys, import paths, file rename qq.py → qqbot.py)
- Add PLATFORM_HINTS for QQBot in prompt_builder (QQ supports markdown)
- Set SUPPORTS_MESSAGE_EDITING = False to skip streaming on QQ
(prevents duplicate messages from non-editable partial + final sends)
- Add _send_qqbot() standalone send function for cron/send_message tool
- Add interactive _setup_qq() wizard in hermes_cli/setup.py
- Restore missing _setup_signal/email/sms/dingtalk/feishu/wecom/wecom_callback
functions that were lost during the original merge
Models like MiniMax emit inline <think>...</think> reasoning blocks in
their content field. The CLI already suppresses these via a state machine
in _stream_delta, but the gateway's GatewayStreamConsumer had no
equivalent filtering — raw think blocks were streamed directly to
Discord/Telegram/Slack.
The fix adds a _filter_and_accumulate() method that mirrors the CLI's
approach: a state machine tracks whether we're inside a reasoning block
and silently discards the content. Includes the same block-boundary
check (tag must appear at line start or after whitespace-only prefix)
to avoid false positives when models mention <think> in prose.
Handles all tag variants: <think>, <thinking>, <THINKING>, <thought>,
<reasoning>, <REASONING_SCRATCHPAD>.
Also handles edge cases:
- Tags split across streaming deltas (partial tag buffering)
- Unclosed blocks (content suppressed until stream ends)
- Multiple consecutive blocks
- _flush_think_buffer on stream end for held-back partial tags
Adds 22 unit tests + 1 integration test covering all scenarios.
When the 5-second stream_task timeout in gateway/run.py expires (due to
slow Telegram API calls from rate limiting after several messages), the
stream consumer is cancelled via asyncio.CancelledError. The
CancelledError handler did a best-effort final edit but never set
final_response_sent, so the gateway fell through to the normal send path
and delivered the full response again as a reply — causing a duplicate.
The fix: in the CancelledError handler, set final_response_sent = True
when already_sent is True (i.e., the stream consumer had already
delivered content to the user). This tells the gateway's already_sent
check that the response was delivered, preventing the duplicate send.
Adds two tests verifying the cancellation behavior:
- Cancelled with already_sent=True → final_response_sent=True (no dup)
- Cancelled with already_sent=False → final_response_sent=False (normal
send path proceeds)
Reported by community user hume on Discord.
/stop was calling suspend_session() which marked the session for auto-reset
on the next message. This meant users lost their conversation history every
time they stopped a running agent — especially painful for untitled sessions
that can't be resumed by name.
Now /stop just interrupts the agent and cleans the session lock. The session
stays intact so users can continue the conversation.
The suspend behavior was introduced in #7536 to break stuck session resume
loops on gateway restart. That case is already handled by
suspend_recently_active() which runs at gateway startup, so removing it from
/stop doesn't regress the original fix.
Updated the acquire_scoped_lock function to treat empty or corrupt lock files as stale. This change ensures that if a lock file exists but is invalid, it will be removed to prevent issues with stale locks. Added tests to verify recovery from both empty and corrupt lock files.
- Store source metadata on /voice channel join so voice input shares the
same session as the linked text channel conversation
- Treat voice-linked text channels as free-response (skip @mention and
auto-thread) while voice is active
- Scope the voice-linked exemption to the exact bound channel, not
sibling threads
- Guard signal handler registration in start_gateway() for non-main
threads (prevents RuntimeError when gateway runs in a daemon thread)
- Clean up _voice_sources on leave_voice_channel
Salvaged from PR #3475 by twilwa (Modal runtime portions excluded).
The detached bash subprocess spawned by /restart gets killed by
systemd's KillMode=mixed cgroup cleanup, leaving the gateway dead.
Under systemd (detected via INVOCATION_ID env var), /restart now uses
via_service=True which exits with code 75 — RestartForceExitStatus=75
in the unit file makes systemd auto-restart the service. The detached
subprocess approach is preserved as fallback for non-systemd
environments (Docker, tmux, foreground mode).
When a user sends /restart, the gateway now persists their routing info
(platform, chat_id, thread_id) to .restart_notify.json. After the new
gateway process starts and adapters connect, it reads the file, sends a
'Gateway restarted successfully' message to that specific chat, and
cleans up the file.
This follows the same pattern as _send_update_notification (used by
/update). Thread IDs are preserved so the notification lands in the
correct Telegram topic or Discord thread.
Previously, after /restart the user had no feedback that the gateway was
back — they had to send a message to find out. Now they get a proactive
notification and know their session continues.
When tool_preview_length is 0 (default for platforms without a tier
default, like Session), verbose mode was truncating args JSON to 200
characters. Since the user explicitly opted into verbose mode, they
expect full tool call detail — the 200-char cap defeated the purpose.
Now: tool_preview_length=0 means no truncation in verbose mode.
Positive values still cap as before. Platform message-length limits
handle overflow naturally.
Three changes that address the poor WhatsApp experience reported by users:
1. Reclassify WhatsApp from TIER_LOW to TIER_MEDIUM in display_config.py
— enables streaming and tool progress via the existing Baileys /edit
bridge endpoint. Users now see progressive responses instead of
minutes of silence followed by a wall of text.
2. Lower MAX_MESSAGE_LENGTH from 65536 to 4096 and add proper chunking
— send() now calls format_message() and truncate_message() before
sending, then loops through chunks with a small delay between them.
The base class truncate_message() already handles code block boundary
detection (closes/reopens fences at chunk boundaries). reply_to is
only set on the first chunk.
3. Override format_message() with WhatsApp-specific markdown conversion
— converts **bold** to *bold*, ~~strike~~ to ~strike~, headers to
bold text, and [links](url) to text (url). Code blocks and inline
code are protected from conversion via placeholder substitution.
Together these fix the two user complaints:
- 'sends the whole code all the time' → now chunked at 4K with proper
formatting
- 'terminal gets interrupted and gets cooked' → streaming + tool progress
give visual feedback so users don't accidentally interrupt with
follow-up messages
Port from nearai/ironclaw#2304: Telegram's 4096 character limit is
measured in UTF-16 code units, not Unicode codepoints. Characters
outside the Basic Multilingual Plane (emoji like 😀, CJK Extension B,
musical symbols) are surrogate pairs: 1 Python char but 2 UTF-16 units.
Previously, truncate_message() used Python's len() which counts
codepoints. This could produce chunks exceeding Telegram's actual limit
when messages contain many astral-plane characters.
Changes:
- Add utf16_len() helper and _prefix_within_utf16_limit() for
UTF-16-aware string measurement and truncation
- Add _custom_unit_to_cp() binary-search helper that maps a custom-unit
budget to the largest safe codepoint slice position
- Update truncate_message() to accept optional len_fn parameter
- Telegram adapter now passes len_fn=utf16_len when splitting messages
- Fix fallback truncation in Telegram error handler to use
_prefix_within_utf16_limit instead of codepoint slicing
- Update send_message_tool.py to use utf16_len for Telegram platform
- Add comprehensive tests: utf16_len, _prefix_within_utf16_limit,
truncate_message with len_fn (emoji splitting, content preservation,
code block handling)
- Update mock lambdas in reply_mode tests to accept **kw for len_fn
Port from openclaw/openclaw#64586: users who copy .env.example without
changing placeholder values now get a clear error at startup instead of
a confusing auth failure from the platform API. Also rejects placeholder
API_SERVER_KEY when binding to a network-accessible address.
Cherry-picked from PR #8677.
Port from openclaw/openclaw#64796: Per MSC3952 / Matrix v1.7, the
m.mentions.user_ids field is the authoritative mention signal. Clients
that populate m.mentions but don't duplicate @bot in the body text
were being silently dropped when MATRIX_REQUIRE_MENTION=true.
Cherry-picked from PR #8673.
Some OpenAI-compatible clients (Open WebUI, LobeChat, etc.) send
message content as an array of typed parts instead of a plain string:
[{"type": "text", "text": "hello"}]
The agent pipeline expects strings, so these array payloads caused
silent failures or empty messages.
Add _normalize_chat_content() with defensive limits (recursion depth,
list size, output length) and apply it to both the Chat Completions
and Responses API endpoints. The Responses path had inline
normalization that only handled input_text/output_text — the shared
function also handles the standard 'text' type.
Salvaged from PR #7980 (ikelvingo) — only the content normalization;
the SSE and Weixin changes in that PR were regressions and are not
included.
Co-authored-by: ikelvingo <ikelvingo@users.noreply.github.com>
Four fixes for the Weixin/WeChat adapter, synthesized from the best
aspects of community PRs #8407, #8521, #8360, #7695, #8308, #8525,
#7531, #8144, #8251.
1. Streaming cursor (▉) stuck permanently — WeChat doesn't support
message editing, so the cursor appended during streaming can never
be removed. Add SUPPORTS_MESSAGE_EDITING = False to WeixinAdapter
and check it in gateway/run.py to use an empty cursor for non-edit
platforms. (Fixes#8307, #8326)
2. Media upload failures — two bugs in _send_file():
a) upload_full_url path used PUT (404 on WeChat CDN); now uses POST.
b) aes_key was base64(raw_bytes) but the iLink API expects
base64(hex_string); images showed as grey boxes. (Fixes#8352, #7529)
Also: unified both upload paths into _upload_ciphertext(), preferring
upload_full_url. Added send_video/send_voice methods and voice_item
media builder for audio/.silk files. Added video_md5 field.
3. Markdown links stripped — WeChat can't render [text](url), so
format_message() now converts them to 'text (url)' plaintext.
Code blocks are preserved. (Fixes#7617)
4. Blank message prevention — three guards:
a) _split_text_for_weixin_delivery('') returns [] not ['']
b) send() filters empty/whitespace chunks before _send_text_chunk
c) _send_message() raises ValueError for empty text as safety net
Community credit: joei4cm (#8407), lyonDan (#8521), SKFDJKLDG (#8360),
tomqiaozc (#7695), joshleeeeee (#8308), luoxiao6645(#8525),
longsizhuo (#7531), Astral-Yang (#8144), QingWei-Li (#8251).
- Remove duplicate _setup_feishu() definition (old 3-line version left
behind by cherry-pick — Python picked the new one but dead code
remained)
- Remove misleading 'Disable direct messages' DM option — the Feishu
adapter has no DM policy mechanism, so 'disable' produced identical
env vars to 'pairing'. Users who chose 'disable' would still see
pairing prompts. Reduced to 3 options: pairing, allow-all, allowlist.
- Fix test_probe_returns_bot_info_on_success and
test_probe_returns_none_on_failure: patch FEISHU_AVAILABLE=True so
probe_bot() takes the SDK path when lark_oapi is not installed
The _watch_update_progress() poll loop never deleted .update_prompt.json
after forwarding the prompt to the user, causing the same prompt to be
re-sent every poll cycle (2s). Two fixes:
1. Delete .update_prompt.json after forwarding — the update process only
polls for .update_response, it doesn't need the prompt file to persist.
2. Guard re-sends with _update_prompt_pending check — belt-and-suspenders
to prevent duplicates even under race conditions.
Add regression test asserting the prompt is sent exactly once.
When the gateway shuts down gracefully (hermes update, gateway restart,
/restart), it now writes a .clean_shutdown marker file. On the next
startup, if this marker exists, suspend_recently_active() is skipped
and the marker is cleaned up.
Previously, suspend_recently_active() fired on EVERY startup —
including planned restarts from hermes update or hermes gateway restart.
This caused users to lose their conversation history unexpectedly: the
session would be marked as suspended, and the next message would
trigger an auto-reset with a notification the user never asked for.
The original purpose of suspend_recently_active() is crash recovery —
preventing stuck sessions that were mid-processing when the gateway
died unexpectedly. Graceful shutdowns already drain active agents via
_drain_active_agents(), so there is no stuck-session risk. After a
crash (no marker written), suspension still fires as before.
Fixes the scenario where a user asks the agent to run hermes update,
the gateway restarts, and the user's next message gets an unwanted
'Session automatically reset' notification with their history cleared.
Add content-aware splitting to compact mode: short chat-like exchanges
(2-6 short lines without headings/lists/quotes) get separate message
bubbles for a natural chat feel, while structured content (tables,
headings with body, numbered lists) stays in a single message.
Cherry-picked from PR #7587 by bravohenry, adapted to the compact/legacy
split_per_line architecture from #7903.
When the agent calls process(action='wait') or process(action='poll')
and gets the exited status, the completion_queue notification is
redundant — the agent already has the output from the tool return.
Previously, the drain loops in CLI and gateway would still inject
the [SYSTEM: Background process completed] message, causing the
agent to receive the same information twice.
Fix: track session IDs in _completion_consumed set when wait/poll/log
returns an exited process. Drain loops in cli.py and gateway watcher
skip completion events for consumed sessions. Watch pattern events
are never suppressed (they have independent semantics).
Adds 4 tests covering wait/poll/log marking and running-process
negative case.
The gateway startup path references RedactingFormatter without
importing it, causing a NameError crash when launched with a
verbosity flag (e.g. via launchd --replace).
Fixes#8044
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds an optional focus topic to /compress: `/compress database schema`
guides the summariser to preserve information related to the focus topic
(60-70% of summary budget) while compressing everything else more aggressively.
Inspired by Claude Code's /compact <focus>.
Changes:
- context_compressor.py: focus_topic parameter on _generate_summary() and
compress(); appends FOCUS TOPIC guidance block to the LLM prompt
- run_agent.py: focus_topic parameter on _compress_context(), passed through
to the compressor
- cli.py: _manual_compress() extracts focus topic from command string,
preserves existing manual_compression_feedback integration (no regression)
- gateway/run.py: _handle_compress_command() extracts focus from event args
and passes through — full gateway parity
- commands.py: args_hint="[focus topic]" on /compress CommandDef
Salvaged from PR #7459 (CLI /compress focus only — /context command deferred).
15 new tests across CLI, compressor, and gateway.
Fixes#7952 — Matrix E2EE completely broken after mautrix migration.
- Replace MemoryCryptoStore + pickle/HMAC persistence with mautrix's
PgCryptoStore backed by SQLite via aiosqlite. Crypto state now
persists reliably across restarts without fragile serialization.
- Add handle_sync() call on initial sync response so to-device events
(queued Megolm key shares) are dispatched to OlmMachine instead of
being silently dropped.
- Add _verify_device_keys_on_server() after loading crypto state.
Detects missing keys (re-uploads), stale keys from migration
(attempts re-upload), and corrupted state (refuses E2EE).
- Add _CryptoStateStore adapter wrapping MemoryStateStore to satisfy
mautrix crypto's StateStore interface (is_encrypted,
get_encryption_info, find_shared_rooms).
- Remove redundant share_keys() call from sync loop — OlmMachine
already handles this via DEVICE_OTK_COUNT event handler.
- Fix datetime vs float TypeError in session.py suspend_recently_active()
that crashed gateway startup.
- Add aiosqlite and asyncpg to [matrix] extra in pyproject.toml.
- Update test mocks for PgCryptoStore/Database and add query_keys mock
for key verification. 174 tests pass.
- Add E2EE upgrade/migration docs to Matrix user guide.
Add display.platforms section to config.yaml for per-platform overrides of
display settings (tool_progress, show_reasoning, streaming, tool_preview_length).
Each platform gets sensible built-in defaults based on capability tier:
- High (telegram, discord): tool_progress=all, streaming follows global
- Medium (slack, mattermost, matrix, feishu): tool_progress=new
- Low (signal, whatsapp, bluebubbles, wecom, etc.): tool_progress=off, streaming=false
- Minimal (email, sms, webhook, homeassistant): tool_progress=off, streaming=false
Example config:
display:
platforms:
telegram:
tool_progress: all
show_reasoning: true
slack:
tool_progress: off
Resolution order: platform override > global setting > built-in platform default.
Changes:
- New gateway/display_config.py: resolver module with tier-based platform defaults
- gateway/run.py: tool_progress, tool_preview_length, streaming, show_reasoning
all resolve per-platform via the new resolver
- /verbose command: now cycles tool_progress per-platform (saves to
display.platforms.<platform>.tool_progress instead of global)
- /reasoning show|hide: now saves show_reasoning per-platform
- Config version 15 -> 16: migrates tool_progress_overrides into display.platforms
- Backward compat: legacy tool_progress_overrides still read as fallback
- 27 new tests for resolver, normalization, migration, backward compat
- Updated verbose command tests for per-platform behavior
Addresses community request for per-channel verbosity control (Guillaume Meyer,
Nathan Danielsen) — high verbosity on backchannel Telegram, low on customer-facing
Slack, none on email.
Add display.interim_assistant_messages config (enabled by default) that
forwards completed assistant commentary between tool calls to the user
as separate chat messages. Models already emit useful status text like
'I'll inspect the repo first.' — this surfaces it on Telegram, Discord,
and other messaging platforms instead of swallowing it.
Independent from tool_progress and gateway streaming. Disabled for
webhooks. Uses GatewayStreamConsumer when available, falls back to
direct adapter send. Tracks response_previewed to prevent double-delivery
when interim message matches the final response.
Also fixes: cursor not stripped from fallback prefix in stream consumer
(affected continuation calculation on no-edit platforms like Signal).
Cherry-picked from PR #7885 by asheriif, default changed to enabled.
Fixes#5016
Complete the contextvars migration by adding HERMES_SESSION_KEY to the
unified _VAR_MAP in session_context.py. Without this, concurrent gateway
handlers race on os.environ["HERMES_SESSION_KEY"].
- Add _SESSION_KEY ContextVar to _VAR_MAP, set_session_vars(), clear_session_vars()
- Wire session_key through _set_session_env() from SessionContext
- Replace os.getenv fallback in tools/approval.py with get_session_env()
(function-level import to avoid cross-layer coupling)
- Keep os.environ set as CLI/cron fallback
Cherry-picked from PR #7878 by 0xbyt4.
Add a second WeCom integration mode for regular enterprise self-built
applications. Unlike the existing bot/websocket adapter (wecom.py),
this handles WeCom's standard callback flow: WeCom POSTs encrypted XML
to an HTTP endpoint, the adapter decrypts, queues for the agent, and
immediately acknowledges. The agent's reply is delivered proactively
via the message/send API.
Key design choice: always acknowledge immediately and use proactive
send — agent sessions take 3-30 minutes, so the 5-second inline reply
window is never useful. The original PR's Future/pending-reply
machinery was removed in favour of this simpler architecture.
Features:
- AES-CBC encrypt/decrypt (BizMsgCrypt-compatible)
- Multi-app routing scoped by corp_id:user_id
- Legacy bare user_id fallback for backward compat
- Access-token management with auto-refresh
- WECOM_CALLBACK_* env var overrides
- Port-in-use pre-check before binding
- Health endpoint at /health
Salvaged from PR #7774 by @chqchshj. Simplified by removing the
inline reply Future system and fixing: secrets.choice for nonce
generation, immediate plain-text acknowledgment (not encrypted XML
containing 'success'), and initial token refresh error handling.
