* feat(tui): make display.mouse_tracking pick which DEC modes to enable
Previously the boolean flag was all-or-nothing across modes 1000+1002+1003+1006.
Inside tmux, mode 1003 (any-motion) makes every mouse cross of the prompt row
fire a clipboard probe that surfaces as "No image in clipboard" — sometimes
dozens in a row. Disabling tracking entirely killed scroll-wheel scrolling too,
since tmux's own scrollback is preempted by the alt-screen TUI.
`display.mouse_tracking` (and `/mouse <preset>`) now accepts `off | wheel |
buttons | all` in addition to the legacy booleans. `wheel` is 1000+1006:
scroll wheel + click only, no drag, no hover — the tmux-friendly subset.
`buttons` adds 1002 for drag-to-select. `all` (= legacy `true`) keeps the
hover-driven UI (scrollbar paginate-on-hover, link mouseenter, etc.).
* fix(tui): repaint + sync mouse mode when display.mouse_tracking changes
Two interacting bugs left the TUI blank when `display.mouse_tracking`
switched at runtime (config edit, /mouse <preset>):
1. AlternateScreen's effect re-runs on every `mouseTracking` change,
tearing down and re-entering the alt screen. After re-entry, ink's
frame buffers are reset by `resetFramesForAltScreen()` but nothing
schedules the follow-up render — the alt screen sits blank until
some other state change happens to trigger one. Add a
`scheduleRender()` in `setAltScreenActive`'s active=true branch so
the freshly-entered alt screen gets a full repaint immediately.
2. `setAltScreenActive` early-returns when `active` hasn't changed,
which silently drops a `mouseTracking` change if the cleanup→setup
pair somehow leaves `altScreenActive` already true. Call
`setAltScreenMouseTracking` explicitly from the AlternateScreen
effect so the in-memory mode and terminal DECSET sequence stay in
sync regardless of how `setAltScreenActive` resolved (the call is a
no-op when the mode is unchanged).
* fix(tui): address copilot review #4341269705
- tui_gateway/server.py: drop the never-referenced _MOUSE_TRACKING_MODES
frozenset (comment #3284802434). _MOUSE_TRACKING_ALIASES already
centralizes the canonical preset set via its values; the separate
constant added no behavior.
- tests/test_tui_gateway_server.py: update the existing
test_config_mouse_uses_documented_key_with_legacy_fallback to assert
the new preset strings ('all'/'off' instead of 'on'/'off',
display.mouse_tracking persisted as 'all' instead of True) and add
test_config_mouse_accepts_preset_strings_and_aliases covering /mouse
set with wheel/click/unknown (comment #3284802453). The on/off legacy
config.set return shape was an implementation detail of the boolean
flag, not a stable API — the slash command, gateway help text, and
docs all advertise the preset values now.
- ui-tui/packages/hermes-ink/src/ink/ink.tsx: schedule a render at the
end of reenterAltScreen() (comment #3284802461). Mirrors the same fix
in setAltScreenActive() from ece0a2f4c — without it, SIGCONT/resize
self-heal/stdin-gap re-entry leaves the alt screen blank because
every caller returns early after invoking us.
* fix(tui): address copilot review #4341308478 round 2
- ui-tui/src/config/env.ts (comment #3284837577): the precedence
comment was misleading. Actual behavior on origin/main is
HERMES_TUI_MOUSE_TRACKING (explicit override) > Termux default >
HERMES_TUI_DISABLE_MOUSE legacy kill-switch. This is preserved from
main; the only change here was the wrong comment that claimed
DISABLE_MOUSE kept kill-switch semantics. Rewrote the comment block
to document the actual precedence ladder.
- tui_gateway/server.py /mouse set (comment #3284837607): replaced
'str(value or "").strip().lower()' with the explicit None idiom
already used for /indicator, so programmatic callers can pass 0 /
False and have them route through _MOUSE_TRACKING_ALIASES → 'off'
instead of collapsing to '' and triggering the toggle path.
- ui-tui/packages/hermes-ink/src/ink/components/AlternateScreen.tsx
(comment #3284837620): always prepend DISABLE_MOUSE_TRACKING before
enableMouseTrackingFor(...) on mount. Otherwise selecting
'wheel'/'buttons' from a state where DEC 1003 was already asserted
(crash, another app, debugger) would silently leave hover on. Also
unconditionally DISABLE on unmount so a crash mid-mount can't leak
DEC modes back to the host shell.
* chore(release): map nat@nthrow.io to @nthrow for #26681 salvage
* fix(tui): drop redundant setAltScreenMouseTracking in AlternateScreen
Copilot review #4341356637 (comment #3284880417). The explicit
setAltScreenMouseTracking(mouseTracking) after setAltScreenActive(true,
mouseTracking) was defensive paranoia added in the previous fix commit
that's not actually reachable in practice:
- React's cleanup always runs before the next setup, so on any prop
change (mouseTracking or writeRaw) the cleanup sets active=false
first. Setup then sees active was false and applies the new mode
via setAltScreenActive without early-returning.
- On the impossible 'active stayed true' path, the writeRaw above has
already sent DISABLE_MOUSE_TRACKING + enableMouseTrackingFor(newMode)
to the terminal, so the in-memory mode would lag but the visible
state is already correct.
Removing the redundant call means a single DEC sequence per mount.
If the 'active stayed true' path ever manifests in practice, the
right fix is in setAltScreenActive (track mode regardless of the
active early-return), not here.
* fix(tui): always DISABLE before enableMouseTrackingFor in ink.tsx
Copilot review #4341379994 (comments #3284900825, #3284900840,
#3284900852). Three remaining call sites in ink.tsx still re-enabled
mouse tracking without first sending DISABLE_MOUSE_TRACKING:
- handleResize alt-screen recovery (line ~577)
- reassertTerminalModes stdin-gap re-assertion (line ~1351)
- reenterAltScreen SIGCONT/resize/stdin-gap self-heal (line ~1408)
For 'wheel'/'buttons' presets, omitting DISABLE leaves any externally-
asserted DEC 1003 (other apps, prior crash, tmux state) still active
and the hover-free preset silently has hover on. DISABLE_MOUSE_TRACKING
is idempotent and safe to send unconditionally — it resets all four
modes. Matches the pattern already in setAltScreenMouseTracking and
the AlternateScreen mount path.
* fix(tui): always DISABLE before enableMouseTrackingFor in exitAlternateScreen
Copilot review #4341452823 (comment #3284959762). exitAlternateScreen()
was the last call site in ink.tsx still re-enabling mouse tracking
without DISABLE first. Editors (vim/nvim/less) and tmux can leave
DEC 1003 hover asserted across the handoff back; without DISABLE,
'wheel'/'buttons' presets silently kept hover on after the editor
quit. Now all five enableMouseTrackingFor() call sites in ink.tsx
prepend DISABLE_MOUSE_TRACKING — handleResize, reassertTerminalModes,
reenterAltScreen, setAltScreenMouseTracking, exitAlternateScreen.
* fix(tui): add defensive default to enableMouseTrackingFor switch
Copilot review #4341485231 (comment #3284979323). TS exhaustive switch
returns string per the type system, but a JS caller / corrupted config
/ hot-reload-in-dev could reach the function with an unknown value at
runtime. Without a default, that path returns undefined which then
concatenates as the literal string 'undefined' into the terminal byte
stream — visibly garbling output. Treat unknown as 'off' (no DEC
sequences) so the worst case is silent input loss rather than a
wrecked screen.
---------
Co-authored-by: Nat Thrower <nat@nthrow.io>
- Replace 18-line comment block with 3-line invariant statement
- Trim test docstrings from multi-paragraph to single-line summaries
- Trim assertion messages from 4-line to 2-line mismatch reports
- Replace 5-line WHAT comments in stubs with 1-line WHY comments
- Add ziliangdotme@gmail.com -> ziliangpeng to AUTHOR_MAP
The contributor PR (#17936) only patched the strip path in
`_model_supports_vision()`. The auto-mode router in
`agent/image_routing._lookup_supports_vision` still only read models.dev,
so a custom-provider model declared as vision-capable would still get its
images routed through vision_analyze in the default `agent.image_input_mode:
auto` setting. Users had to set both `supports_vision: true` AND
`image_input_mode: native` to bypass the text pipeline.
Single-knob behavior now: `supports_vision: true` alone is enough in auto
mode. The strip path and the routing path consult the same resolver.
- Extract override resolution into `_supports_vision_override()` in
agent/image_routing.py and wire it into `_lookup_supports_vision()`.
- Refactor `run_agent._model_supports_vision` to call the same helper
(DRY, single source of truth for the resolution order).
- Strict YAML boolean coercion: `supports_vision: "false"` (quoted —
a common YAML mistake) no longer coerces to True via bool() truthiness.
Recognised tokens: true/false/yes/no/on/off/1/0 plus real bools and 0/1.
Unrecognised values return None and fall through to models.dev.
- Add @CNSeniorious000 to AUTHOR_MAP for release attribution.
Tests: 26 new (TestCoerceCapabilityBool, TestSupportsVisionOverride,
TestLookupSupportsVisionOverride, TestAutoModeRespectsOverride). Existing
contributor tests + image_routing + vision_native_fast_path +
native_image_buffer_isolation all green (92/92).
After #28660's host-gating fix, users with provider=custom and base_url
pointed at a commercial endpoint (DeepSeek, Groq, Mistral, …) hit
no-key-required even when they had the vendor-named env var set
(DEEPSEEK_API_KEY, GROQ_API_KEY, …). The issue author flagged this as
'what users intuitively expect'.
Adds _host_derived_api_key() to derive an env var name from the base URL
host using the *registrable* label (second-to-last). Appended to all three
api_key_candidates chains (_resolve_named_custom_runtime direct-alias path,
named-custom path, _resolve_openrouter_runtime non-openrouter branch).
Lookalike resistance: api.deepseek.com.attacker.test resolves to vendor
label 'attacker', NOT 'deepseek' — DEEPSEEK_API_KEY stays put. IPs and
loopback yield no vendor label. Already-handled vendors (OPENAI/OPENROUTER/
OLLAMA) are filtered to prevent bypass of the explicit host-gated paths.
Adds 6 tests covering positive paths (DeepSeek, Groq), the lookalike attack,
loopback rejection, the already-handled-vendor filter, and direct helper
unit tests.
Also adds erhnysr to AUTHOR_MAP.
The email "jonny@nousresearch.com" belongs to @yoniebans (GitHub id
5584832, display name "jonny"), not to Jeffrey Quesnelle (@jquesnelle,
id 687076, who commits as emozilla@nousresearch.com). Verified across
all 60 historical commits on the repo authored from this email — every
one of them was a yoniebans commit being mis-credited to jquesnelle in
the changelog.
Surfaced while salvaging PR #29182 (yoniebans's session-log refactor).
When config.yaml has provider: ollama (or vllm/llamacpp/llama-cpp) with a
non-loopback base_url, auth.py's resolve_provider() correctly normalises
the alias to 'custom' at the top level, but two sites in runtime_provider.py
were still comparing the *original* string against the literal 'custom':
- _config_base_url_trustworthy_for_bare_custom() rejected non-loopback
URLs because cfg_provider_norm was 'ollama', not 'custom'.
- _resolve_openrouter_runtime() only entered the trust branch when
requested_norm == 'custom'.
Both sites now consult resolve_provider() and treat any alias that
resolves to 'custom' identically. Result: provider: ollama + LAN IP no
longer silently falls through to OpenRouter (HTTP 401), matching the
behaviour of provider: custom with the same base_url.
E2E verified across 6 cases (ollama/vllm/llamacpp/custom + LAN; ollama +
loopback; openrouter + cloud) — all route to the configured endpoint;
'frobnicate' + LAN still rejects with AuthError as before.
Also adds scripts/release.py AUTHOR_MAP entry for @stepanov1975
(PR #22074 — wizard config picker preservation, cherry-picked into the
preceding commit).
The catalog's sourceUrl points at github.com/browserbase/browse.sh,
whose underlying repository is not always public — most raw URLs derived
from it 404. Use the per-skill detail endpoint instead, which returns a
skillMdUrl CDN blob that reliably resolves to the SKILL.md text. Fall
back to a raw.githubusercontent.com sourceUrl if the detail call fails.
- tools/skills_hub.py: rewrite BrowseShSource.fetch() to resolve via
/api/skills/{slug} -> skillMdUrl; drop the unreachable _to_raw_url
helper; expose the resolved URL in bundle.metadata.skill_md_url.
- tests/tools/test_skills_hub_browse_sh.py: match the real catalog
shape (name = task name, slug = host/task-id), exercise the
detail-endpoint -> blob two-call flow, and add a fallback test.
- scripts/release.py: map kylejeong21@gmail.com -> Kylejeong2.
Adds the canonical noreply form (54813621+xxxigm@users.noreply.github.com)
alongside the existing plain-email mapping so the salvage commit for
@xxxigm's codex doctor PR doesn't fail AUTHOR_MAP CI.
PR #28330 was salvaged with a wrong noreply numeric ID (18091625 vs
the correct 7065068). The commit on main is correctly authored to
Grogger by username, but neither noreply form was in AUTHOR_MAP.
Adds both so release-notes generation maps them to @Grogger.
