Follow-up to #59332 targeting the remaining PERCEIVED first-token latency
(the wire streaming was already per-token; these fix what the user sees):
1. display.show_reasoning default ON. On thinking models the reasoning
phase streams for tens of seconds; with the display off users stare
at a spinner the whole time and read it as a stall. Flipped in
DEFAULT_CONFIG, load_cli_config defaults, tui_gateway raw-YAML
fallbacks, and the hermes setup status line (all four read sites kept
in sync). Gateway per-platform defaults intentionally stay off —
messaging chats shouldn't fill with thinking text. /reasoning hide
still turns it off and persists.
2. Response box force-flushes long partial lines. _emit_stream_text only
painted on newline, so a response opening with a long paragraph
stayed invisible until the first \n — seconds of blank box. Now
partial lines wrap at terminal width and paint as tokens arrive
(mirrors the reasoning box's 80-char force-flush that existed since
day one). Table blocks remain batch-aligned; no content loss at wrap
boundaries (regression tests added).
3. hermes_time timezone resolution uses read_raw_config (mtime-cached +
libyaml C loader) instead of a raw yaml.safe_load of config.yaml
(~110-140ms measured) inside the FIRST system prompt build. First
build drops 320ms -> ~155ms on a 200-skill install.
4. Stale docs: configuration.md (en+zh) still documented the 70%/90%
[BUDGET WARNING] tool-result injections. Those were removed in April
2026 (c8aff7463) precisely because they hurt task completion; current
behavior is exhaustion-message + one grace call, no mid-loop
injection, no cache impact. Docs now describe reality.
Verified: token-count compression decisions already use API-reported
last_prompt_tokens (rough estimators are preflight-only and cost ~1.7ms
even on 1.7MB histories — not worth touching).
Bare 'hermes sessions prune' keeps the historical 90-day default, but any
filter — now including --source — suppresses the implicit cutoff, so
'prune --source cron' targets ALL cron sessions instead of silently only
those older than 90 days (the surprise a user hit live: 'No sessions
match ... source cron' despite plenty of recent cron runs).
- CLI preview + confirmation now show the match count plus the oldest
and newest matching session start times before deleting.
- Dashboard /api/sessions/prune mirrors the semantics: attribute filters
without an explicit older_than_days match all ages (model_fields_set
distinguishes an explicit 90 from the Pydantic default); dry_run
responses gain oldest_started_at/newest_started_at.
- Docs + argparse help updated; tests for both surfaces.
* feat(sessions): full filter surface for prune + new bulk archive subcommand
hermes sessions prune previously only supported --older-than N (integer
days) and --source — no way to target a window like 'the last 5 hours'
(e.g. a batch of CI smoke-test sessions), and no non-destructive option.
- SessionDB.prune_sessions gains keyword filters that AND together:
started_before/started_after epoch bounds, title_like, end_reason,
cwd_prefix, min/max_messages, archived tri-state. Default call is
byte-for-byte compatible (90-day cutoff, ended-only, source).
- New SessionDB.list_prune_candidates (backs --dry-run + confirmation
previews) and SessionDB.archive_sessions (bulk soft-hide via the
existing set_session_archived lineage-aware path; nothing deleted).
- CLI: prune gains --newer-than/--before/--after (durations like 5h/2d/1w,
bare days, or ISO timestamps), --title, --end-reason, --cwd,
--min/--max-messages, --include-archived, --dry-run. New
'hermes sessions archive' takes the same filters, requires at least one,
and is idempotent. Both show a preview before confirming.
- Dashboard /api/sessions/prune accepts the same filters + dry_run.
- Docs: sessions.md + cli-commands.md updated.
Filter parsing lives in hermes_cli/session_filters.py with unit tests;
DB filters covered in tests/test_hermes_state.py.
* feat(sessions): prune/archive filters for model, provider, user, chat, branch, tokens, cost, tool calls
Extends the prune/archive filter surface to everything identifiable in
the sessions table:
- --model (substring on model slug), --provider (exact on
billing_provider, case-insensitive), --user, --chat-id, --chat-type
(exact), --branch (substring on git_branch), --min/--max-tokens
(input+output), --min/--max-cost (USD, actual_cost_usd falling back to
estimated_cost_usd), --min/--max-tool-calls.
- SessionDB prune/archive/list_prune_candidates now share the filter
kwargs via **filters into _prune_filter_where (unknown names raise
TypeError); candidates listing + CLI preview now include the model.
- Any attribute filter (except legacy --source) suppresses the implicit
90-day default so 'prune --model X' matches all ages.
- Dashboard /api/sessions/prune passes the new fields through.
- Docs + tests updated (7 new DB tests, 3 new parser tests).
Follow-up to #9006/#58899. The gateway routing index (session_key ->
SessionEntry) now lives in a new gateway_routing table in state.db as the
primary store; sessions.json is demoted to an optional legacy mirror.
- hermes_state.py: schema v19 — gateway_routing table (scope + session_key
PK; scope = resolved sessions_dir so multiple stores sharing one state.db
never cross-contaminate) with save/replace/load/delete methods
- gateway/session.py: _save() writes the whole index atomically to the DB
(mirrors the old full-file JSON rewrite semantics) and only falls back to
JSON when the DB write fails; _ensure_loaded reads the DB first and folds
in legacy sessions.json entries for keys the DB lacks (pre-migration
import; DB entries win over stale JSON)
- gateway/config.py + hermes_cli/config.py: new write_sessions_json flag
(default true for compat/downgrade safety); gateway.write_sessions_json:
false stops producing the file entirely
- sessions.json _README updated to say it's a legacy mirror + how to
disable it
Rehydration is now lossless across restarts even with sessions.json deleted:
suspended/resume_pending/model_override/token state all round-trip through
the DB (the old sessions-table recovery only rebuilt the bare key mapping).
The `hermes prompt-size` command now uses `_get_platform_tools()` to resolve
platform-specific toolsets the same way the gateway does, and also honors
`agent.disabled_toolsets` from config. This fixes the discrepancy where
`prompt-size` reported more tools than actually available in real sessions
for a given platform.
Fixes#41445.
Raise the CLI login floor from 180s to 315s (OAuth callback window 300s
+ headroom, matching web_server's existing constant), and let the GUI
re-auth path honor a configured connect_timeout larger than 315s.
Persists as the server's connect_timeout in config, which the probe
now honors. CLI-flag portion of PR #54494; the probe-wrapper portion
was superseded by resolving connect_timeout inside _probe_single_server.
_reauth_oauth_server (hermes mcp login / reauth) called
_probe_single_server without a timeout, so it always used the 30s
probe default — far too short for a human browser OAuth round-trip
(open → sign in → consent → loopback redirect). The server-level
connect_timeout in config.yaml was silently ignored, so login timed
out at ~40s no matter what the user configured.
Pass the server's configured connect_timeout through, with a 180s
floor for the interactive login path. Update the two TestMcpLogin
probe mocks for the new kwarg and assert the login path propagates a
>=180s timeout.
Blank Slate's _blank_slate_minimal_toolsets() adds every TOOLSETS entry
to agent.disabled_toolsets except file and terminal. The coding
posture toolset (session-level, selected by agent/coding_context.py)
slips through because the loop only skips hermes-* composites and
includes-only groups.
At runtime, model_tools.get_tool_definitions() resolves coding and
subtracts its tools — terminal, read_file, write_file, patch,
search_files, process — erasing the entire Blank Slate minimal surface.
The agent ends up with only cronjob.
Skip posture toolsets in the disabled-list computation. Posture
toolsets are not user-facing capabilities to disable; they are
per-session selections that should never appear in agent.disabled_toolsets.
Fixes#57315
The "Test server" probe (`_probe_single_server`, used by the Desktop/dashboard
MCP tab, `hermes mcp add`, and `hermes mcp test`) called `prompts/list` and
`resources/list` on every server unconditionally whenever `details` was
requested. This ignored the user's `tools.prompts` / `tools.resources` config
and the server's own advertised capabilities.
Servers that don't implement those optional families (e.g. Unreal Engine's MCP
server, which answers `Call to unknown method "prompts/list"`) therefore logged
a hard error during discovery, and setting `tools.prompts: false` — the
documented workaround — had no effect because the probe never consulted it.
Mirror the runtime gating in `tools.mcp_tool._select_utility_schemas`: only
probe a family when it is enabled in config AND advertised in the server's
`initialize` capabilities. Falls back to the previous always-try behaviour when
no capability info was captured.
Adds approvals.deny to config.yaml — a list of fnmatch globs matched
against terminal commands. A match blocks unconditionally, BEFORE the
--yolo / /yolo / approvals.mode=off bypass, making it the user-editable
counterpart to the code-shipped hardline blocklist.
- Checked in both command gates (check_dangerous_command and
check_all_command_guards), after the hardline floor and sudo-stdin
guard, before the yolo bypass and permanent allowlist.
- Matching runs over the same normalized/deobfuscated command variants
as the dangerous-pattern detector, case-insensitive.
- Opt-in: empty/absent list is a no-op; behavior unchanged.
Supersedes the trust-engine approach from #21500 with a minimal
config-native design: the only capability the existing stack lacked
was deny-that-beats-yolo. Allow already exists (command_allowlist),
ask already exists (session approvals).
Sibling sweep from the #58902 raft review found aiohttp servers still
running on the implicit 1 MiB default with no explicit body cap:
- bluebubbles webhook (127.0.0.1): 1 MiB explicit cap — events are small
JSON/form payloads; attachments arrive via the REST API
- teams Bot Framework listener (0.0.0.0 bind — most exposed): 1 MiB cap;
activities are JSON well under that
- hermes proxy server: 10 MB cap mirroring api_server's MAX_REQUEST_BYTES
(chat-completion payloads can be large, but must stay bounded)
client_max_size bounds every read path including chunked transfer-encoding
requests that carry no Content-Length (#58536/#58902 pattern).
Deliberately excluded: feishu, whatsapp_cloud, sms, line, wecom, msgraph —
open contributor PRs (#54938, #54944, #54620, #54931, #54934, #25296)
already cover those; reviewing them separately preserves their credit.
3 regression tests pin the wiring.
Port from qwibitai/nanoclaw#2713: expose Hermes' existing Docker network isolation primitive through terminal config so operators can opt out of container egress.
The load_config() cache is keyed on config file mtime/size only, so a
load_config() that runs before load_hermes_dotenv() populates the process
environment caches the unexpanded ${VAR} literal and serves it for the
life of the process — auxiliary.<task>.api_key/base_url env refs reach the
provider client verbatim (auth failure / silent fallback), while
providers.* appear to work because provider credential resolution re-reads
the environment at call time.
Record a snapshot of every ${VAR} name referenced in the raw config
(user + managed) with its os.environ value at expansion time, and treat
the cache as stale when any of those values change. Covers both the late
.env load and in-process key rotation; an unchanged environment still
takes the cache-hit path.
Fixes#58514
Moves gateway routing metadata (display_name, origin_json, expiry_finalized)
into state.db, making SQLite the single source of truth for gateway session
discovery. Eliminates the dual-file (sessions.json + state.db) polling
dependency that caused the mcp_serve new-conversation race (#8925).
- hermes_state.py: schema v18 (3 new sessions columns + sessions.json
backfill migration), record_gateway_session_peer gains
display_name/origin_json, new set_expiry_finalized(),
list_gateway_sessions(), find_session_by_origin()
- gateway/session.py: peer recorder persists display_name + full origin
JSON; new SessionStore.set_expiry_finalized() single write-path
- gateway/run.py: expiry watcher success + give-up paths use the store
helper so the flag lands in both sessions.json and state.db
- mcp_serve.py: routing index reads state.db first (sessions.json fallback
for pre-migration DBs); _poll_once collapses to a single state.db mtime
check — the #8925 race is structurally impossible now
- gateway/mirror.py, gateway/channel_directory.py, hermes_cli/status.py:
query state.db first, sessions.json fallback
Closes#9006
ruff check --fix --select F541 . on current main. Pure prefix removals;
adjacent-string concatenations keep the f only on interpolating fragments.
No string content or live placeholder altered.
Phase-2 review follow-ups on the unreadable-config chokepoint work:
- hermes_cli/xai_retirement.py apply_migration() is a full-file config.yaml
rewriter (ruamel round-trip + plain open("w")) that lives outside the
atomic_yaml_write path, so the chokepoint didn't cover it. It reads the
file first (which already fails closed on an unreadable file), but add
require_readable_config_before_write() right before the write as a
backstop for the read-then-write window, and a regression test asserting
the original bytes survive an unreadable config.
- Drop the unnecessary "Path" string quotes on atomic_config_write's
annotation — Path is imported eagerly at module top, no forward ref needed.
auth.py _update_config_for_provider / _reset_config_provider intentionally
keep their standalone require_readable_config_before_write guard + bare
atomic_yaml_write: the guard must fire BEFORE the read (fail-fast) at those
read-then-write sites, and a test pins the atomic_yaml_write call. Both are
already fully guarded against the bug; routing them through the wrapper
would move the check to write time for no benefit.
The unreadable-config-overwrite bug (an existing config.yaml that reads as
{} on a permission/IO error gets replaced with only defaults or the edited
section) is not limited to save_config / config set / auth. The same
read-then-atomic_yaml_write pattern lives at ~7 other independent write
sites that don't route through those functions:
- gateway/slash_commands.py: _save_config_key, memory/skills write_approval
toggles, tool_progress toggle, runtime_footer toggle, personality set
- hermes_cli/doctor.py --fix (stale root-key migration)
- gateway/platforms/yuanbao.py auto-sethome
- plugins/platforms/telegram/adapter.py topic thread_id persistence
- tui_gateway/server.py _save_cfg
- agent/onboarding.py mark_seen
Rather than sprinkle require_readable_config_before_write() at each site,
add a single fail-closed chokepoint, atomic_config_write(), that runs the
guard then delegates to atomic_yaml_write, and route every config.yaml
write through it. Root cause remains that read_raw_config() can't tell an
absent file from an unreadable one (returns {} for both) — read-only
callers correctly stay fail-open, but any full-file replacement now fails
closed in one enforced place instead of relying on each caller to remember
the guard.
save_config / set_config_value / auth keep the contributor's original
guard calls (their commit); this commit widens the fix to the sibling
call paths and adds a regression test on the chokepoint (fails closed on
unreadable existing file + still creates a genuinely absent file).
Replaces the POSIX `/bin/bash -c "$(curl …)"` invocation with a
download-then-exec flow: curl the upstream install.sh into a mkstemp
temp file (unpredictable name, 0600) and run it as a plain argv list.
No shell=True, no command substitution. The temp script is removed in
a finally block; download failures return cleanly without exec.
Salvages the intent of #34974 by @ErnestHysa. His original patch
targeted a fixed /tmp/cua-driver-install.sh path (symlink/TOCTOU-prone
on multi-user hosts) and predates Windows/Linux installer support;
this version uses mkstemp and keeps the powershell path untouched.
Co-authored-by: ErnestHysa <takis312@hotmail.com>
Follow-up to #57987: after /skill-a the completer previously went silent
for a second /skill token. Now, while the leading tokens form an unbroken
skill chain (each token a distinct installed skill, under the 5-cap) and
the word under the cursor starts with '/', the completer keeps offering
the remaining skill commands, and SlashCommandAutoSuggest ghost-suggests
the rest of the next skill name. Instruction text, path-like tokens, and
broken chains get no suggestions. The TUI's complete.slash RPC reuses
SlashCommandCompleter, so it inherits the behavior with no changes.
* fix(cli): unwedge cua-driver installer timeouts — group-kill on timeout, stale-lock pre-clear, 660s ceiling
The cua-driver refresh in hermes update could wedge permanently:
subprocess timeout (300s) killed only the outer shell, orphaning the
curl|bash grandchildren and the upstream installer's concurrent-install
lock (~/.cua-driver/packages/.install.lock.d). The installer only
reclaims a stale lock after 600s of waiting — longer than our old
ceiling — so every subsequent run was killed before recovery could
fire: 'always times out'.
- Run the installer in its own process group (start_new_session) and
SIGKILL the whole group on timeout, so no lock-holding orphans survive.
- Pre-clear a provably-stale lock (dead holder pid, or pid-less and
older than the upstream 600s window) before invoking the installer.
- Raise the ceiling to 660s (> upstream LOCK_STALE_AFTER_SECONDS=600).
- Timeout message now names the lock path and the manual re-run command.
Fixes#58762
* chore: suppress windows-footgun lint on platform-gated kill calls
Both sites are POSIX-only: _clear_stale_cua_install_lock early-returns
on win32, and os.killpg sits in the 'not is_windows' branch.
* feat(approvals): /deny <reason> relays denial reason to the agent
Port from qwibitai/nanoclaw#2832 (reject with reason).
Gateway /deny now accepts an optional trailing reason (/deny <reason>
or /deny all <reason>). The reason rides on the per-session approval
entry through resolve_gateway_approval -> _await_gateway_decision and is
appended to the BLOCKED tool result the agent receives, so a declined
agent can adapt instead of only hearing 'denied'.
Adapted to hermes-agent's synchronous single-command /deny model: no DB
state, no second-message capture step, no migration. Reason is capped at
280 chars and threaded through both the terminal-command guard and the
execute_code guard. Plain /deny and the approve paths are unchanged.
- tools/approval.py: _ApprovalEntry.reason; resolve_gateway_approval gains
optional reason; _await_gateway_decision returns it; both gateway BLOCKED
messages include it
- gateway/slash_commands.py: parse leading 'all' + trailing reason
- locales/en.yaml: deny.denied_reason_{singular,plural}
- hermes_cli/commands.py: /deny args_hint '[all] [reason]'
- tests: 3 new (with-reason, all+reason, plain-deny regression)
* fix(ci): localize deny-reason keys across all locales + update interrupt-path assertions
CI surfaced two enforced invariants broken by the deny-with-reason change:
- test_i18n catalog-parity requires every locale to carry the same keys as
en.yaml with matching placeholders. Added deny.denied_reason_singular/plural
(with {count}/{reason}) to all 15 non-English locales.
- test_approval_interrupt asserts the exact dict from _await_gateway_decision,
which now carries a 'reason' key (None on the interrupt/timeout paths).
UV's bundled Python ships a minimal PATH that excludes /bin and /usr/bin,
causing launchctl/systemctl subprocess calls to fail with FileNotFoundError.
Fixes#3849
Widens the symlinks=True fix to the create_profile clone sites so a
symlink pointing at a parent directory can't recurse infinitely during
'hermes profile create <name> --clone-all' (#11560). Export paths were
covered by the salvaged #58397/#58445 commits; this carries the clone
half of open PR #11573.
Fixes#11560
`hermes profile export default` crashed with `shutil.Error` when
HERMES_HOME pointed outside ~/.hermes (common in Docker deployments)
and the workspace contained broken symlinks. Two root causes:
1. `copytree` defaults to `symlinks=False` and follows link targets;
broken ones crash. #58397 (liuhao1024) drafted a minimal
`symlinks=True` flag fix; this PR adopts that change.
2. `copytree` was invoked against the entire HERMES_HOME root (which
doubles as cwd in Docker layouts). The post-hoc blacklist at
`_DEFAULT_EXPORT_EXCLUDE_ROOT` is a fixed-length enumerate-and-pray
list that can't anticipate every unrelated sibling directory
(`x11-dev/`, etc.). Replaced with a positive allow-list at
`_DEFAULT_EXPORT_INCLUDE_ROOT` enumerating the known Hermes profile
artifacts (config, persona, skills, cron, scripts, sessions,
plugins, memories, knowledge, preferences). Sensitive runtime
surfaces (`state.db`, `logs/`, auth files, other profiles) are
intentionally not in the allow-list so the export stays a
portable, credential-free snapshot of the user-facing surface —
which means the existing `test_export_default_excludes_infrastructure`
regressions remain green.
Adds two regression tests:
* test_export_default_uses_allowlist_for_unrelated_dirs — >x11-dev<
sibling directories must not leak into the archive.
* test_export_default_handles_broken_symlinks — symlinks inside
allowed artifacts survive instead of crashing the export.
closing that PR as superseded once this lands.
Closes#58394
shutil.copytree() defaults to symlinks=False which follows symlinks and
crashes on broken ones. In Docker/custom HERMES_HOME deployments,
unrelated directories may contain stale symlinks that break export.
Add symlinks=True to both copytree() calls in export_profile() so
broken symlinks are preserved as symlink entries in the archive.
Fixes#58394
* fix(cli): set correct x-initiator header per Copilot turn
copilot_default_headers() always hardcoded x-initiator: agent, but
GitHub Copilot billing requires "user" for user-initiated prompts and
"agent" for tool/follow-up calls. This caused premium requests to never
be consumed correctly, risking billing issues or account bans.
Adds is_agent_turn param to copilot_default_headers() and injects
extra_headers={"x-initiator": "user"} on the first API call of each
user turn when targeting Copilot URLs. The flag flips to False after
injection so subsequent calls (tool use, streaming fallback) default
back to "agent".
Fixes#3040
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore(release): add AUTHOR_MAP entry for @tjp2021 (PR #4097 salvage)
---------
Co-authored-by: Tim <tim@iteachyouai.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Extend the pre_tool_call plugin hook return contract with a new directive:
{"action": "approve", "message": "why this needs human confirmation"}
Previously a pre_tool_call hook could only veto a tool call (action: block)
or allow it silently. It could not escalate to the existing human-approval
flow. This unlocks user-defined runtime approval rules on ANY tool (HTTP
writes, file writes to sensitive paths, email sends), enforced at runtime —
resolving #51221 as a pure plugin, with no core approval.py rule schema.
Mechanism:
- get_pre_tool_call_directive() returns (action, message) for block|approve;
get_pre_tool_call_block_message() kept as a block-only back-compat shim.
- resolve_pre_tool_block() is the single dispatch-site chokepoint: fetches
the directive and, for approve, invokes the human gate; fail-closed to a
block on denial, timeout, or gate exception. ALL FOUR tool-dispatch sites
now call it: tool_executor (concurrent + sequential), agent_runtime_helpers,
and model_tools.handle_function_call.
- request_tool_approval() escalates via the SAME machinery as Tier-2
dangerous commands: session/permanent allowlist, prompt_dangerous_approval
(CLI) / submit_pending (gateway), [o]nce/[s]ession/[a]lways/[d]eny,
timeout fail-closed, approvals.cron_mode for cron contexts.
Architecture: extracted the shared decision core into _run_approval_gate(),
called by BOTH check_dangerous_command() and request_tool_approval() so the
fail-closed / cron / gateway / yolo / persist policy lives in ONE place and
cannot drift. Fixed a latent divergence — the plugin path now honors --yolo.
Approval grain: [a]lways is keyed on tool_name + a hash of the reason (an
explicit plugin rule_key overrides), so distinct reasons on the same tool
persist independently instead of one 'always' blanketing the whole tool.
Non-interactive: cron honors approvals.cron_mode (parity with commands); any
other non-interactive non-gateway context fails CLOSED for the plugin path
(the command path keeps its historical fail-open default, unchanged).
No new config schema, no new env vars, no new hook events.
_normalize_custom_provider_entry() runs on every load_picker_context()
call (per picker/inventory request) and warned each time for (a) the
redundant `provider` key that Hermes' own config writer emits into
provider entries and (b) any other unknown key. On Windows the serve
launcher+worker pair share one rotating log via concurrent-log-handler's
cross-process lock, so that per-load warning volume drove 'Cannot acquire
lock after 20 attempts' retries that pegged a core, stalled the event
loop ~14s, and dropped every desktop/TUI WebSocket while /health stayed
green (gateway looked down; dashboard looked fine).
- Accept `provider` as a known key (silently ignored) so self-written
legacy configs don't warn.
- Deduplicate the normalizer's warnings per (provider, signature) so a
static config quirk is surfaced once, not on every inventory load.
Adds regression tests for both.
Fixes#58265
- package-lock.json changes in #58451 were unrelated peer-flag churn
- CANONICAL_PROVIDERS 'poolside' entry from #58374 has no ProviderConfig
in hermes_cli/auth.py and no setup flow, so the picker entry would be
dead; the wire-format coercions stand on their own
Follow-up to @srojk34's basename-denylist widening. Two gaps the
basename-only guard left, both covered by the two canonical guards it
mirrors:
- Directory-tree stores mcp-tokens/ (live MCP OAuth tokens) and pairing/
are denied as whole trees by gateway.platforms.base._ROOT_CREDENTIAL_DIRS
and agent.file_safety, but the dashboard files API descends into subdirs,
so mcp-tokens/<server>.json (non-canonical basename) stayed
listable/readable/downloadable. Add _is_sensitive_path(), a path-aware
check that blocks any path with a credential-directory component, and
route all three call sites (list/read/download) through it.
- Add .git-credentials to the basename set (agent.file_safety blocks it too).
- Correct the docstring: it now says it mirrors the credential-FILE basenames
of the canonical guards, with the directory trees handled by the new
path-aware helper (the prior wording overstated parity).
Scope stays on the read/list/download exfil surface (#57505); the write
endpoints (upload/mkdir/delete) are a separate threat and out of scope.
Tests: dir-tree descent blocked (mcp-tokens/pairing per-server files),
.git-credentials blocked, plus a positive control that a benign subdir file
stays browsable. Mutation-checked (neuter _is_sensitive_path -> new tests
fail). 39 web_server_files + fs tests pass, ruff clean.
_is_sensitive_filename() only blocked .env / .env.<suffix>, but the
dashboard Files tab's managed root is operator-configurable and, per the
docker-mount scenario #57505 was filed against, can point directly at
HERMES_HOME — where the canonical credential stores enforced elsewhere
in the codebase (gateway.platforms.base._ROOT_CREDENTIAL_FILES,
agent.file_safety.get_read_block_error) all live: auth.json, OAuth
token stores, webhook HMAC secrets, the Bitwarden disk cache. None of
those basenames were blocked, so the Files tab could still list, read,
and download them. .envrc (direnv) also slipped past the old check
since it doesn't equal ".env" or start with ".env.".
Widen the basename set to mirror both existing guards so the dashboard
doesn't lag behind them.
